PIECE QUANTITY
A 1X
B 2X
C 1X
D 4X
H1 4X
H2 4X
H3
8X
H4 1X
Step 1 : the hardware need to connect legs ( B) and shelves ( C ) are 4 bolts M8x40 ( H2)
Step 2 : fix steel plate ( D) into wooden legs by 4 bolts M8x20 ( H3)
Step 4 : Turn and finish
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic
and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common
hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint
free cotton cloth dampened with water or furniture polish. On highly used surfaces we recommend
applying a quality paste wax which should be used on a regular basis to provide additional
protection from scratches and spills. How often you apply the wax depends on how much wear the
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Model#: VNN1020A
Part List and Hardware List
Product Dimensions: L55.12xW17.72xW29.53 inches
DESCRIPTION
PICTURE
CEMENT TOP
Wooden legs
WASHER
BOLT M8x20
ALLEN KEY
Step 3 : use 4 bolt M8x20 ( H2 ) and washer to connect wooden frame and concrete top
at metal connecting plate
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Shelves
BOLT M8x40
Connecting plate
PREPARATION
3
4
Loading...