CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
D
E
H1
H2
H3
H4
H5
H6
H7
Sunlouger frame
Front leg
Cross bar of leg
Wheel
Block conner
Back leg
Screw -1
Screw - 2
Allen bolt
Washer
Screw -3
Allen key
7x50mm
6 x 20mm
8x50mm
6 x 60mm
1X
Model# PAT7022
Product Dimensions:25.19" W x 34.25" D x 34.25" H
2X
2X
2X
8X
2X
4X
8X
2X
2X
16X
2X
H8
Allen key
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
1
H4
2
H2
B
C
H2
H1
C
D
H5
H1
H4
H4
B
H2
B
H1
H2
H1
H5
D
H4
H3
H3
C
B
H3
D
H1
H3
H3
C
D
H1
H7
A
H3
H3
H3
E
3
H7
H6
E
H7
H6
H6
H6
H6
E
H6
H7
E
E
E
H6
A
H6
H6
E
H6
H6
H7
H6
E
D
E
H6
H6
H6
E
E
H6
H6
D
E
H6
A
H7
Step 1
-Attached (B) & (C),using H2
tighten with H8
- Attached (H1)& (C),using H2
tighten with H8
- Attached (D) & (H1) insert (H3)
inside using (H4) tighten with (H7)
Step 2 Step 3
(B) & (C) attached to (A),using (H3) tighten
with(H8),(D),(H1),(C),attached to (A),using
Attached (E) & (B),using (H6) tighten with H8.
Attached block (H1),using (H6) tighten with (H8).
(H3) tighten with (H8)