Safavieh PAT6710B Assembly Guide

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.

NOTICE

Please make sure that you have all parts indicated before you
begin assembly of this item.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY

Back

1x

Seat

1x

Left side

Right side

1x

1x

Support L

Support S

1x
1x

MODEL# PAT6710
Product Dimension: 48.43”W x 24.8”D x 31.89”H

Weight capacity : 600 lbs.
Warning : Do not stand on the bench

Warning : Do not torque bolts / screws

Allen Bolt

Screw

Bolt extra

Allen Key

M6x70

M4x35

M6x50

6x

2x
1x

1x

PREPARATION

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.

1

Step 1: attach right side (D) to the back (A). Then attach
support L (E) and support S (F) to the right side (D) as shown on
the picture by using the Allen Bolt (H1) and tighten all with the Allen
Key (H4). Continue with the left side (C) in the same way.
Make sure to tighten all bolts (H1) before you continue with step 2.

2

Step 2: put the seat (B) inside the bench as shown on the picture
and use the screws (H2) to attach it to the chair by using a screwdriver.