Safavieh LIT4490A User Manual

Assembly Instruction

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

ITEM#:LIT4490A

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent) to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.

Estimated Assembly Time:30 minutes

Part List and Hardware List

PIECE DESC R IPT IO N PICTUR E QU A N T IT Y PIECE DESCRIPTION PIC TURE QU ANTITY

A

B

C

D

E

F

Wire Nu t

M ounting B ar

Mountin g S cr ew

Ca nopy

Ch ain

Fix tu re Lo op

3X

1X

2X

1X

1X

1X

G

H

I

J

K

L

La m pbod y

Shad e

Finial

Bulb

De corat ion

Dr op per

1X

1X

1X

2X

26X

1X

1 / 3

Installation

stripes)

Step 1

Unpack all parts from cartons carefully.

Place the Shade(H) to the Lampbody(G) and tighten by finial(I).

Screw the Chain(E)to the lock of the Lampbody(G) as shown below.

Step 2 Wire connection

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply W ire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored
Insulated W ire(not green)with copper metal conductor Insulated W ire(not green)with Silver metal conductor

*Note: W hen parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw

on mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a
ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green
grounding screw on mounting bracket. Tighten ground screw.

Clear,Brwn,Gold or Black without Tracer(colored stripes)

2 / 3