Page 1
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model#PAT5011
Part List and Hardware List
Product Dimensions:68.5"W x13.75 " D x87.75" H
PIECE DESCRIPTION PICTURE QUANTITY
A Top left bracket 1x
B Top right bracket 1x
C Left pillar 1x
D Right pillar 1x
E Ground Stake 4x
F Nuts 6x
G Spanner 1x
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):SPANNER.
Nuts has been kept on product itself, two spare nuts can found in hardware bag
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
step1
step2
Joint the top left bracket (A) and the top right bracket (B) to the
pillars (C) and (D) with the fastening nuts; and connect the two
brackets together with the fastening nuts.
Hammer the gound stake (E) to the ground to reinforce
the arch.
Loading...