WOOFit Go
BLUETOOTH SPEAKER
Bluetooth speaker
Rechargeable
Stereo pairing
Water repellent
Changeable front
Hands-free calling
Quick start guide
1. Oplad højttaleren i minimum 2 timer
2. Tænd højttaleren på Power knappen
3. Tænd for Bluetooth på den enhed, som du vil forbinde til
højttaleren
4. Vælg ”WOOFit Go” i Bluetooth-indstillingerne på din
enhed
5. Start afspilning af musik fra din enhed
6. Nyd musikken og dans
Forbind to WOOFit Go højttalere
Hvis du har to WOOFit Go højttalere kan du forbinde dem som
stereopar på følgende måde:
1. Tænd begge højttalere på Power knappen
2. Tryk tre gange på Power knappen for at få WOOFit Go i
pairing mode (indikationslyset blinker grønt ved korrekt
pairing mode). Dette skal du gøre på begge højttalere
3. Højttalerne forbindes i løbet af få sekunder.
Indikationslyset lyser grønt ved korrekt forbindelse.
Brugermanual
Læs brugsanvisningen før du tager produktet i brug. Hent
brugermanual online på følgende link:
sackit.dk/support
Her kan du downloade brugermanualen og gemme den til
senere brug. I brugermanualen nder du instruktioner og
vigtige sikkerhedsoplysninger.
1DK2
Quick start guide
1. Lad opp høyttaleren i minimum 2 timer
2. Slå på høyttaleren med Power knappen
3. Slå på Bluetooth på den enheten, som du vil koble
høyttaleren til
4. Velg ”WOOFit Go” i Bluetooth-innstillingene på din
enheten din
5. Spill av musikk fra enheten din
6. Nyt musikken og dans
Koble to WOOFit Go høyttalere sammen
Hvis du har to WOOFit Go høyttalere kan du koble dem
sammen som stereopar på følgende måte:
1. Slå på begge høyttalere med Power knappen
2. Trykk tre ganger på Power knappen for å få WOOFit Go i
pairing mode (inndikasjonslyset blinker grønt ved korrekt
pairing mode). Dette skal du gjøre på begge høyttalere
3. Høyttalerne kobles sammen i løpet at få sekunder.
Indikasjonslyset lyser grønt ved korrekt kobling
Brukermanual
Les instruksjonene før du bruker dette produktet. Last ned
bruksanvisningen på følgende link:
sackit.no/support
Her kan du laste ned bruksanvisningen og oppbevare den for
senere bruk. I bruksanvisningen nner du instruksjoner og
viktig sikkerhetsinformasjon.
NO
Quick Start Guide
1. Charge the speaker for at least 2 hours
2. Turn on the speaker using the Power Button
3. Turn on Bluetooth on the device you want to connect to
the speaker
4. Choose ”WOOFit Go” in the Bluetooth settings on your
device
5. Start playing music from your device
6. Nod your head and dance
Connect two WOOFit Go speakers
If you have two WOOFit Go speakers it is possible to create a
stereo pair:
1. Power on both speakers
2. Click the Power button three times to enter pairing mode
(the indication light will ash green in correct pairing
mode). Repeat this for both speakers
3. The speakers will connect in a few seconds. A green light
indicates correct connection.
User manual
Read the user manual thoroughly before using the product.
Download user manual online at:
sackit.eu/support
Please download the user manual and save it for future use. In
the user manual, you will nd instructions and important safety
information.
UK
3
Quick start guide
1. Es dauert min 2 Stunden bis die Lautsprecher vollständig
aufgeladen sind
2. Drücken Sie den Power Button
3. Paaren Sie das gewünschte Gerät mit Ihrem Lautsprecher,
indem Sie die Bluetooth-Empfangsbereitschaft aktivieren
4. Wählen Sie “WOOFit Go“ in Ihrem Display
5. Starten Sie die Musik
6. Jetzt können Sie Ihre Lieblingsmusik genießen
Zwei Lautsprecher verbinden
Bei zwei „WOOFit GO“ Lautsprecher, haben Sie die Möglichkeit
diese zu verbinden:
1. Beide Power Button drücken
2. Drücken Sie 3 Mal auf den Power Button um den
Paarungsmodus zu aktivieren (Bei korrekter Paarung
erscheint eine grüne Leuchtanzeige). Entsprechend muss
dieses, auf beiden Lautsprechern ausgeführt werden
3. Die Lautsprecher werden innerhalb weniger Sekunden
miteinander verbunden. Bei einer korrekten Verbindung
erscheint eine grüne Leuchtanzeige
Bedienungsanleitung
Lesen Sie bitte diese Bedienungsanleitung vor Gebrauch sorgfältig
durch. Laden Sie die Bedienungsanleitung unter folgendem Link
herunter:
sackitshop.de/support
Hier können Sie die Bedienungsanleitung herunterladen und für
späteren Gebrauch aufbewahren. In der Bedienungsanleitung
nden Sie technische Beschreibungen und wichtige
Sicherheitshinweise.
DE
4
Technical specications
• 3,7V rechargeable Li-Ion battery with 950mAh
• Battery life: 5 hours at maximum volume, 9,5 hours at
50% volume
• Charging via included micro USB cable
• Bluetooth version 5
• Output power: 1x3W
• Frequency bands: 2402-2480MHz
• Power transmitted: Maximum 10dBm
• Operating temperature range: 0-35 ° C/32-95 ° F
• LED indicator
• Stylish Danish design. Measurements: 105x91 x 45mm
• Weight: 225g
Hereby, SACKit ApS declares that the radio equipment type
WOOFit Go is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the
following internet address: http://SACKit.eu/support.
.0
5
Safety information
A. Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type
B. batteries (battery pack or batteries installed) shall not be exposed to
To prevent overheating, please do not install the speaker in enclosed spaces. Be
sure to set aside at least 10cm around the product for ventilation. The ventilation
should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
Do not place this device in or close to sources of excessive heat
This product contains a battery. The product cannot be discarded as general living
of battery. The correct disposal of the battery helps to avoid the potentially
negative impact on the environment and human health.
that the product must not be processed with househlod
waste. It must be brought to an electric and electronic waste
collection point for recycling and disposal. By ensuring
the appropriate disposal of this product you also help in
preventing potentially negative consequences for the
environment and human health. The recycling of materials
helps preserve our natural resources. For further information
regarding the recycling of this product, please contact your
municipality, local waste disposal centre or the store where
the product was purchased.
visions
6
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Loading...