Sachtler SpeedLevel Clamp User Manual

www.sachtler.com

SpeedLevel Clamp

SpeedLevel Clamp

Part No. S2044-0001

User Guide

Copyright © 2014

All rights reserved.
Original Instructions: English
All rights reserved throughout the world. No part of

this document may be stored in a retrieval system,
transmitted, copied or reproduced in any way,
including, but not limited to, photocopy , photograph,
magnetic or other record without the prior
agreement and permission in writing of the Vitec
Group plc.

Disclaimer

The information contained in this user guide is
believed to be correct at the time of printing.
Vitec Videocom Ltd reserves the right to make
changes to the information or specifications without
obligation to notify any person of such revision or
changes. Changes will be incorporated in new
versions of the publication.

Should this user guide not contain information on the
core functionality of your product, please let us
know. You may be able to access the latest revision
of this manual from our website.

Vitec Videocom Ltd reserves the right to make
changes to product design and functionality without
notification.

Trademarks

All product trademarks and registered trademarks
are the property of The Vitec Group Plc.

All other trademarks and registered trademarks are
the property of their respective companies.

Published by:

Vitec Videocom Ltd
Supports Technical Publications Department
Western Way, Bury St Edmunds
Suffolk IP33 3TB
United Kingdom
Email: [e-mail]

Safety Instructions / Sicherheitshinweise

1

Read the General Safety and Operating
instructions before using the product.

WARNING! Hold the camera securely
when mounting or dismounting the
SpeedLevel Clamp

CAUTION! Always lock the vertical and
horizontal brakes when levelling the fluid
head on the tripod.

Clean regularly using a soft cloth and mild
detergent.

Dry the product after use in wet
conditions.

Should the product become defective,
contact your local Sachtler service center.
To find your local service center visit
www.sachtler.com

Lesen Sie sich vor Verwendung des Pro­dukts bitte die allgemeinen Sicherheits­und Betriebshinweise durch.

WARNUNG! Halten Sie die Kamera
sicher, wenn Sie sie auf dem SpeedLevel
Clamp oder demontieren,

VORSICHT! Verriegeln Sie immer die
vertikalen und horizontalen Bremsen,
wenn Nivellieren des Fluidkopfes.

Reinigen Sie das System regelmäßig mit
einem weichen Tuch und sanften Reini­gungsmittel.

Trocknen Sie das Produkt nach einer Ver­wendung bei feuchten und nassen Bedin­gungen.

Wenden Sie sich bei Schäden am Produkt
an Ihren Sachtler-Kundendienst vor Ort.
Die Kundendienststellen in Ihrer Nähe fin­den Sie unter www.sachtler.com