Sachtler Reporter 400 D User Manual

Reporter 400 D

Manual

Bedienungsanleitung

Daylight luminaire 400W

Tageslichtleuchte 400W

© by sachtler. Alle Rechte vorbehalten / All rights reserved

Version: 2.0/12/03

Ausgabedatum / Issue date: 12/03

Bestellnr./ Order no.:lof18t010a

sachtler GmbH & Co. KG
Erfurter Strasse 16 Postfach / P.O.BOX 12039
D-85386 Eching D-85380 Eching
Germany Germany
Telefon: [phone]
Telefax: ([phone]
E-Mail: [e-mail]
Homepage: http://www.sachtler.com

- I -

Table of contents / Inhaltsverzechnis

Table of contents

1 Safety instructions................................................................1

2 Properties.............................................................................2

3 Operation..............................................................................2

3.1 Inserting the bulb .........................................................2

3.2 Starting the luminaire...................................................3

3.3 Dimming.......................................................................3

3.4 Switching-off the luminaire...........................................4

3.5 Hot restrike ...................................................................4

3.6 First operation..............................................................4

3.7 Changing the bulb........................................................4

3.8 Changing the safety glass............................................5

4 Service / Troubleshooting.....................................................6

5 Technical specifications........................................................6

6 Warranty...............................................................................7

Appendix ..............................................................................8

Inhaltsverzeichnis

1 Sicherheitshinweise..............................................................9

2 Eigenschaften.....................................................................10

3 Betrieb................................................................................10

3.1 Einsetzen des Brenners.............................................10

3.2 Starten der Leuchte ...................................................11

3.3 Dimmen......................................................................11

3.4 Ausschalten der Leuchte............................................11

3.5 Heißzünden................................................................12

3.6 Erstmalige Inbetriebnahme........................................12

3.7 Brennerwechsel .........................................................12

3.8 Schutzscheibe wechseln ............................................13

4 Service / Fehlersuche ........................................................14

5 Technische Daten...............................................................14

6 Garantie..............................................................................15

Anhang...............................................................................16

EC-Declaration of Conformity / EG-Konformitätserklärung

- II -

- 1 -

Reporter 400DManual

1 Safety instructions

➪

Do not connect any electrical components whilst in contact
with water, if you have wet or damp hands or if connectors
or cable are wet/damp!

➪ Do not place the luminaire in water!
➪ Ensure that during the operation of the lumi-

naire enough distance is kept from flamma­ble material and that generated heat can be
dissipated.

➪ Caution! UV radiation! Only operate the fixture with hou-

sing closed and protective glass intact. Never bridge the
safety switch.

➪ If the bulb is damaged or deformed by heat it has to be

exchanged.

➪➪

Broken safety glass has to be replaced imidiately !

➪ The luminare must only be operated with Sachtler ballasts.
➪ It is only per missible to use the luminaire for professional

operation. Children and unqualified persons are to be kept
away from the operation of the device.

➪ Caution! High voltage ignition pulse.Do not start operation

without bulb inserted!

➪ Handle with care! Do not dispose of!

0,9 m

0,2 m

ManualReporter 400D

- 2 -

± 30°

± 90°

2 Properties

The Sachtler Reporter 400 D is designed to be used on light
stands.The luminaire must be operated with the electronic bal­last Netronic 400. If the luminaire is operated overhead, it can
be secured at the yoke against dropping.Ensure that the per­missible operating position is maintained.

3 Operation

3.1 Inserting the bulb

Please first adhere to the bulb manufacturer’s instructions
included in the packing.

➪ Do not touch quartz glass bulb with bare fingers.
Use only bulb types:

Preferred bulb: Philips MSR 400HR
Alternative bulb: Osram HMI 400SE

Open the luminaire (see fig. 1). Push both locking knobs at
the reflector housing. Pull reflector housing off.When fitting
the new bulb ensure that it is inserted correctly by pushing
it firmly into the socket until it clicks into position.If the bulb
is not completely inserted into the socket, an uneven light
distribution will result or the bulb cannot be ignited at all.
When putting the reflector housing back in place, please
ensure its correct positioning.The contact pin on the reflec­tor housing must fit into the hole of the focus housing to
activate the contactor of the safety switch.