© by sachtler®. All rights reserved/Alle Rechte vorbehalten
Version: 3.2/12/2013
Issue date / Ausgabedatum: 12/13
Order no / Bestellnr.: sst13t0500
Originalbetriebsanleitung/Original User Manual
sachtler
®
Vitec Group Videocom Division
www.vitecgroup.com
Erfurter Str. 16 Postfach / P.O.BOX 2039
D-85386 Eching D-85380 Eching
Germany Germany
Telefon: (+49) 89 321 58 200
Telefax: (+49) 89 321 58 227
E-Mail: contact@sachtler.de
Internet: http://www.sachtler.com
Wir wollen die Sachtler Produkte immer auf dem aktuellsten technischen Stand erhalten.
Deswegen behalten wir uns
technische Änderungen vor.
We want to receive
Sachtler products that are
always state of the art.
Therefore we reserve this
right to make changes based
on technical advances.
- I -
Hot Pod CF
Table of Contents
1 Symbols used in the manual................................................2
2 Safety instructions................................................................3
3 Operating elements..............................................................4
4 Hot Pod CF - the fast 100 mm tripod...................................5
5 Operation of the Hot Pod CF ...............................................6
5.1 Setting up ....................................................................6
5.2 Dismantling .................................................................8
5.3 Mounting of the fluid head ..........................................9
5.4 Dismounting the fluid head .......................................10
5.5 Change of the pneumatic spring ...............................11
5.6 Cleaning the Hot Pod CF ..........................................12
6 Technical data ....................................................................13
7 Accessories ........................................................................13
7.1 Fluid heads ...............................................................13
7.2 Pneumatic springs......................................................14
7.3 Hot Pod CF Dolly .......................................................14
8 Warranty.............................................................................14
Hot Pod CF
- II -
Inhaltsverzeichnis
1 Symbolerklärung der Benutzerinformation.........................15
2 Sicherheitshinweise............................................................16
3 Bedienelemente .................................................................17
4 Hot Pod CF - das schnelle 100 mm Stativ ........................18
5 Bedienung des Hot Pod CF ...............................................19
5.1 Aufstellen ..................................................................19
5.2. Abbauen .....................................................................21
5.3. Fluidkopf einsetzen.....................................................22
5.4. Fluidkopf entfernen ....................................................24
5.5. Gasfeder wechseln ....................................................25
5.6 Reinigungsempfehlung ..............................................26
6 Technische Daten...............................................................27
7 Zubehör ..............................................................................27
7.1. Fluidköpfe...................................................................27
7.2. Gasfedern ..................................................................28
7.3. Hot Pod CF Dolly ......................................................28
8 Gewährleistung ..................................................................28
- 1 -
Hot Pod CFBenutzerinformation
ManualHot Pod CF
- 2 -
1 Symbols used in the manual
Indicates an immediate danger to the life and
health of persons.
Non-observance of these instructions will have
serious harmful consequences to health and possible fatal injuries.
Indicates a possible danger to the life and health
of persons.
Non-observance of these instructions may have
serious harmful consequences to health and possible fatal injuries.
Indicates a possibly dangerous situation.
Non-observance of these instructions can lead to
slight injury or material damage.
Indicates a possibly harmful situation.
Non-observance can damage the machine or the
environment.
Indicates user tips and other particularly useful
information.
Shows you what to do.
Informs you about the result of your actions.
The bullets indicate listings.
Danger
Warning
Caution
Note
Important
- 3 -
Hot Pod CFManual
2 Safety instructions
Risk of injury when using a pneumatic spring
The Hot Pod CF is equipped with a special pneumatic spring in the center column.
-> Under no circumstances should you undo
the pneumatic spring. It has an extremely
high internal pressure.
-> Prior to disposal the pneumatic spring must
not be under pressure.
The center column will raise automatically when the
column lock is loose and the transport lock is disengaged.
-> Do not bend over the center column when
loosing the locks.
Risk of accident
-> Observe the local safety regulations governing the prevention of accidents.
-> Operate the Hot Pod CF under the supervision of trained personnel only.
-> Keep the Hot Pod CF away from children.
Danger of tipping over
-> The Hot Pod CF must be placed vertically.
Inclined ground has to be compensated
with adjusting the length of the tripod legs.
-> Place the Hot Pod CF only on ground that is
able to support the load.
-> Take additional safety actions against horizontal force (e.g. wind) to prevent tipping
over.
ManualHot Pod CF
- 4 -
3 Operating elements
Column Lock (Lock)
to lock the center column
Transport Lock
Column Hood at bottom covering the
pneumatic spring
- 5 -
Hot Pod CFManual
4 Hot Pod CF - the fast 100 mm tripod
The 100 mm tripod Hot Pod CF is the perfect addition to the Sachtler fluid heads DV8/100, DV 12, Video 15/DV 15 and Video 18.
The Hot Pod CF's central locking releases all three legs simultaneously with one movement making the Hot Pod CF ready to use in
no time. The pneumatic center column easily lifts loads of up to 15
kg/25 kg to lens heights of over 2 m. The elevation force of the
pneumatic center column is maintenance free. You can choose different pneumatic springs according to your specific needs.
The change of the fluid head is done with a few deft movements,
you don't even need any tools.
A change of location? You can easily carry the Hot Pod CF using its
handle (strategically positioned at the tripod's center of gravity), or
simply using the supplied carrying strap.
ManualHot Pod CF
- 6 -
5 Operation of the Hot Pod CF
5.1 Setting up
-> While holding Hot Pod
CF at it´s transport handle 1, transfer grip to two
adjacent tripod legs at a
position slightly above
the centerplate.
-> Spread out the tripod
legs.
The position of the centerplate 3
is now between the marker 2
and the bottom end of the center
column.
-> While holding the transport handle with one
hand, loosen the central
locking of the legs by
pulling up the center
plate 3 to the marker 2
at the center column.
The tripod legs will drop to full
length.
-> Push down the center
plate 4 completely.
The tripod legs are locked.
- 7 -
Hot Pod CFManual
-> Loosen the column
lock 5.
-> Push down the head
to relieve the hook 6
of the transport lock.
-> Disengage the hook 6
of the transport lock.
If the Hot Pod CF is supplied
with the pneumatic spring,
the center column will raise
automatically.
Risk of injury
The center column will raise automatically
when the column lock is loose and the transport lock is disengaged.
-> Do not bend over the center column when
loosing the locks.
-> Adjust the height to the
desired shooting position
and lock the center
column 7.
Note
-> Always lock the center column for
shooting.