Sachtler Cine 7 + 7 HD User Manual

Cine 7 + 7 HD

Manual

Benutzerinformation

Fluid Head

Fluidkopf

© by sachtler®. Alle Rechte vorbehalten / All rights reserved

Originalbetriebsanleitung/Original User Manual

Version: 1.9/02/2012

Ausgabedatum / Issue date: 02/12

Bestellnr. / Order no.: S 2014-4980

sachtler

®

Vitec Group Videocom Division

www.vitecgroup.com

Erfurter Strasse 16 Postfach / P.O.BOX 2039
D-85386 Eching D-85380 Eching
Germany Germany
Telefon:[phone]
Telefax: ([phone]
E-Mail: [e-mail]
Internet: http://www.sachtler.com

- I -

Cine 7 + 7 HD

Table of contents

1 Safety instructions / General Information.............................1

2 Operating elements..............................................................2

3 Operation..............................................................................4

3.1 Intended use ................................................................4

3.2 Moving of the pan bar ..................................................4

3.3 Levelling of the fluid head ............................................5

3.4 Mounting of the camera and / or plate.........................5

3.5 Counterbalancing of the camera..................................8

3.6 Setting of the damping.................................................8

3.7 Brakes ..........................................................................9

3.8 Change of battery ........................................................9

3.9 Transport setting of damping, counterbalance

and brakes ...................................................................9

4 Technical Data....................................................................10

5 Accessories ........................................................................11

6 Inspection & Cleaning ........................................................11

7 Warranty .............................................................................11

Inhaltsverzeichnis

1 Sicherheitshinweise / Grundlegende Hinweise..................13

2 Bedienelemente .................................................................14

3 Betrieb ................................................................................16

3.1 Bestimmungsgemäße Verwendung ...........................16

3.2 Schwenkarmverstellung .............................................16

3.3 Nivellieren des Fluidkopfes ........................................17

3.4 Entnehmen und Einsetzen der Kameraplatte ............17

3.5 Einstellen der Kamerabalance ...................................20

3.6 Einstellen der Dämpfung............................................20

3.7 Bremsen.....................................................................21

3.8 Austausch der Batterie...............................................21

3.9 Transportstellung von Dämpfung, Gewichts-

ausgleich und Bremsen .............................................21

4 Technische Daten...............................................................22

5 Zubehör ..............................................................................23

6 Inspektion & Pflege ............................................................23

7 Gewährleistung ..................................................................23

- II -

Cine 7 + 7 HD

ManualCine 7 + 7 HD

- 1 -

1 Safety instructions / General Information

Á Before using the fluid head read the manual.

Á Before mounting the fluidhead on the tripod, check if the tri-

pod has a safe standing and if the ttripod leg extensions are
clamped.

Á Before releasing the tie down on the fluid head (with a

mounted camera), the tripod must be secured against fall
over.

Á Before releasing the vertical brake (at a non balanced

camera set up) or the clamping of the camera-/balance plate
the camera must be secured against suden movement,
otherwise there may be a danger of finger trapping.

Á During camera tilt movements with extreme tilt angles there

may be a danger of finger trapping between sideload plate
and housing for users and third persons.

Á Do not use side load lever as a carrying handle

- 2 -

Cine 7 + 7 HDManual

2 Operating elements

Camera plate

Safety push button

Rosette for left pan bar

Vertical brake

Horizontal brake

Tie down

Pic. 1

Payload range
shifter
(Boost Button)

Rosette for front pan bar

Adapter viewfinder extension

Side load lever

Vertical drag
adjustment

Illuminated touch
bubble

Counterbalance
adjustment knob

Battery compartment

for touch bubble

Rosette for right

pan bar

Horizontal drag

adjustment

Pic. 2

Manual

Cine 7 + 7 HD

- 3 -

- 4 -

Cine 7 + 7 HD

Manual

3 Operation

3.1 Intended Use

This fluidhead was developed to enable pan- and tilt move­ments of cameras. The maximum payload is specified in
chapter 4.

3.2 Moving of the pan bar

Open the clamping lever of the pan bar and move the pan
bar into the desired position. Close the clamping screw of
the pan bar. While lifting the lever it will be disengaged and
can now be placed in a desired angular position.
During transportation the pan bar can be moved next to the
tripod legs.

Caution:

Open the clamping screw of the pan bar far
enough. The teeth of the pan bar clamp should not clatter
while moving the pan bar. Make sure that the teeth inter­leave with each other when closing the clamping lever of
the pan bar.
Use of the enclosed pan bar on the left side of the fluid
head is also possible. The pan bar has to be removed from
the head and the black plastic cap on its top should be
opened and removed with a coin or screw driver. The too­thed clamp should be removed and relocated. The plastic
cap needs to be tightened again.