Sachtler Cine 75 HD User Manual
Cine 75 HD
Manual
Benutzerinformation
Fluid Head
Fluidkopf
© by sachtler®Alle Rechte vorbehalten / All rights reserved
Version: 2.9/07/11
Ausgabedatum / Issue date: 07/11
Bestellnr. / Order no.: sko16t110a
Originalbetriebsanleitung/Original User Manual
sachtler
®
Vitec Group Videocom Division
www.vitecgroup.com
Erfurter Strasse 16 Postfach / P.O.BOX 2039
D-85386 Eching D-85380 Eching
Germany Germany
Telefon: (+49) 89 321 58 200
Telefax: (+49) 89 321 58 227
E-Mail: contact@sachtler.de
Homepage: http://www.sachtler.com
We want you to receive
Sachtler products that are
always state of the art.
Therefore we reserve the right
to make changes based on
technical advances.
Wir wollen, dass Ihre
Sachtler Produkte immer auf dem
aktuellsten Stand sind.
Deswegen behalten wir uns technische Änderungen vor.
- I -
Table of contents
1 Safety instructions ...............................................................1
2 Operating elements..............................................................1
3 Operation .............................................................................2
3.1 Levelling of the fluid head............................................2
3.2 Removing of the camera plate ...................................2
3.3 Mounting of the camera...............................................2
3.4 Removing of the camera..............................................3
3.5 Positioning of the camera ............................................4
3.6 Adjusting the camera’s counterbalance ......................5
3.7 Setting of the Damping................................................5
3.8 Brakes ..........................................................................6
3.9 Support for view finder extension and Front Box .......6
3.10 Change of the batteries ...............................................6
3.11 Transport setting of damping, counterbalance
and brakes ...................................................................6
4. Technical specifications.......................................................7
4.1 General data ................................................................7
4.2 Dimensions ..................................................................8
5 Conversion of the Cine 75 HD to include Mitchell base .....8
6 Accessories..........................................................................9
7 Warranty.............................................................................10
Inhaltsverzeichnis
- II -
1 Sicherheitshinweise............................................................11
2 Bedienelemente .................................................................11
3 Betrieb................................................................................12
3.1 Nivellieren des Fluidkopfes ........................................12
3.2 Entnehmen der Kameraplatte ...................................12
3.3 Einsetzen der Kamera ...............................................12
3.4 Entnehmen der Kamera .............................................13
3.5 Zentrieren des Kameragewichts ................................14
3.6 Einstellen der Kamerabalance ..................................14
3.7 Einstellen der Dämpfung............................................15
3.8 Bremsen.....................................................................16
3.9 Sucherlupenstütze und Front Box .............................16
3.10 Austausch der Batterien ............................................16
3.11 Transportstellung von Dämpfung, Gewichts-
ausgleich und Bremsen .............................................16
4 Technische Daten ..............................................................17
4.1 Allgemeine Daten .......................................................17
4.2 Abmessungen ............................................................18
5 Umbau des Cine 75 HD auf Mitchell Basis .......................18
6 Zubehör..............................................................................19
7 Gewährleistung ..................................................................20
- III -
- IV -
- 1 -
Cine 75 HDManual
1 Safety instructions
Á
When the camera is mounted, the clamping screw of the
Cine 75 HD must only be released if camera and tripod are
secured against falling over.
Á When placing the camera plate into the Cine 75 HD, make
sure not to put fingers within the range of the locking lever,
since it will snap back.
Á When releasing the vertical brake make sure that the came-
ra is secured against any sudden movement.
Á Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
Á Before transport reset fluid damping to “0”.
2 Operating elements
safety lock of
Touch & Go®
system
vertical brake
horizontal brake
vertical setting of fluid damping
horizontal setting of fluid damping
counterbalance knob
flange for
viewfinder
extension
locking lever of Touch & Go® system
lever for ½ counterbalance spring
battery holder of
the Touch Bubble
level
rosette for mounting
pan bar
spindler of the sliding balance plate
lock of the sliding balance plate
tilt safety locker
Boost Button
Touch Bubble
level
quick adjust button for the sliding balance plate
flange for front box
ManualCine 75 HD
- 2 -
3 Operation
3.1 Levelling of the fluid head
The Cine 75 HD has a bubble level.
Apply the vertical brake of the Cine 75 HD and hold the
camera with one hand. Open the clamping screw of the
fluid head and move the head in such a way, that the bubble moves into the levels black circle. Tighten the clamping screw firmly.
Touch Bubble level
The Cine 75 HD has a self illuminating touch bubble which
allows easy levelling even under unfavourable lighting
conditions.
The illumination is activated by strong tapping on the bubble. Depending on the force applied the bubble will glow
up to 45 seconds.
3.2 Removing of the camera plate
The Cine 75 HD comes with a Touch & Go® quick release
plate.
Á Hold the camera plate with one hand.
Á Grasp the locking lever with your thumb and index and
pull down the red safety button.
Á Move the locking lever as far as possible to the left
(audible clicking) and take out the camera plate.
3.3 Mounting of the camera
Attach the camera plate to the tripod adapter plate (camera accessory) around the camera’s centre of gravity.
Á Turn the counterbalance knob to position 12
Á Apply horizontal brake and release vertical brake.
- 3 -
Cine 75 HDManual
Á The springs of the counterbalance engage automati-
cally by tilting the camera through the horizontal position (audible clicking).
Á Lock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. The Green marking on the red knob becomes invisible. Make sure that the tilt safety lock has engaged (the
head can’t be tilted any more).
Á Put the front of the camera plate in place first.
Á By fitting the camera onto the head it will lock automa-
tically and the locking lever will snap back audibly into
its initial position.
3.4 Removing of the camera
Á Lock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. The Green marking on the red knob becomes invisible. Make sure that the tilt safety lock has engaged (The
head can’t be tilted any more).
Á Hold the camera with one hand.
Á Grasp the locking lever with your thumb and index and
pull down the red safety button.
Á Move the locking lever as far as possible to the left
and take out the camera plate.
Loading...