Sachtler Cine 30 HD User Manual
Cine 30 HD
Manual
Benutzerinformation
Fluid Head
Fluidkopf
© by sachtler®. Alle Rechte vorbehalten / All rights reserved
Version: 1.9/11/10
Ausgabedatum / Issue date: 11/10
Bestellnr. / Order no.: sko16t130a
Originalbetriebsanleitung/Original User Manual
sachtler
®
Vitec Group Videocom Division
www.vitecgroup.com
Erfurter Strasse 16 Postfach / P.O.BOX 2039
D-85386 Eching D-85380 Eching
Germany Germany
Te le fo n : ( +4 9) 8 9 3 21 5 8 2 00
Te le fa x : ( + 4 9) 8 9 32 1 5 8 2 2 7
E-Mail: contact@sachtler.de
Homepage: http://www.sachtler.com
We want you to receive
Sachtler products that are
always state of the art.
Therefore we reserve the right
to make changes based on
technical
advances.
Wir wollen, dass Ihre
Sachtler Produkte immer auf dem
aktuellsten Stand sind.
Deswegen behalten wir uns technische Änderungen vor.
- I -
Ta b le o f c o n te n t s
Table of contents
1Safety instructions................................................................1
2Operating elements..............................................................2
3Operation..............................................................................4
3.1 Moving of the panbar ...................................................4
3.2 Levelling of the fluid head ............................................4
3.3 Removing of the camera plate.....................................4
3.4 Mounting of the camera ...............................................5
3.5 Removing of the camera..............................................7
3.6 Positioning of the camera ............................................7
3.7 Adjusting the camera´s counterbalance.......................8
3.8 Setting of the damping.................................................8
3.9 Brakes ..........................................................................9
3.10 Support for viewfinder extension..................................9
3.11 Change of the batteries................................................9
3.12 Transport setting of damping, counterbalance and
brakes ..........................................................................9
4Technical specifications......................................................10
5The modular system ...........................................................11
5.1 Conversion to include different balance plate ............11
5.2 Conversion of the Cine 30 HD to include
flat base......................................................................11
5.3 Conversion of the Cine 30 HD to include
Mitchell base ..............................................................11
6Accessories........................................................................12
7Warranty.............................................................................12
Inhaltsverzeichnis
- II -
Inhaltsverzeichnis
1Sicherheitshinweise............................................................14
2Bedienelemente.................................................................15
3Betrieb................................................................................17
3.1 Schwenkarmverstellung .............................................17
3.2 Nivellieren des Fluidkopfes........................................17
3.3 Entnehmen der Kameraplatte ....................................18
3.4 Einsetzen der Kamera ...............................................18
3.5 Entnehmen der Kamera .............................................20
3.6 Zentrieren des Kameragewichts ................................20
3.7 Einstellen der Kamerabalance ...................................21
3.8 Einstellen der Dämpfung............................................22
3.9 Bremsen.....................................................................23
3.10 Sucherlupenstütze .....................................................23
3.11 Austausch der Batterien.............................................23
3.12 Transportstellung von Dämpfung, Gewichtsaus-
gleich und Bremsen ...................................................23
4Technische Daten...............................................................24
5Das Baukastensystem .......................................................25
5.1 Umbau des Fluidkopfes auf andere Balanceplatte ....25
5.2 Umbau des Cine 30 HD auf Flachboden ...................25
5.3 Umbau des Cine 30 HD auf Mitchell .........................26
6Zubehör..............................................................................26
7Gewährleistung..................................................................27
- III -
- IV -
- 1 -
Cine 30 HD
Manual
1Safety instructions
! When the camera is mounted, the tie down of the fluid head
must only be released if camera and tripod are secured
against falling over.
! When releasing the vertical brake make sure that the came-
ra is secured against any sudden movement.
! Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
! Do not use sideload lever as a carrying handle while a
camera is mounted.
Manual
Cine 30 HD
- 2 -
2Operating elements
sideload plate 30 HD
Screw for clamping
force adjustement
Snap lock
Safety lock
Rosette for left pan bar
Rosette for front pan bar
Vertical Brake
Adapter viewfinder
extension
Horizontal brake
Tie down
Payload range switch
Pic. 1
- 3 -
Cine 30 HD
Manual
Tilt safety
lock
Rosette for
right pan bar
Counterbalance
1/2 step switch
Horizontal drag
adjustment
Vertical
drag
adjustment
Illuminated touch
bubble
Counterbalance
adjustment knob
Battery compartment for
touch bubble
Sideload lever
Pic. 2
Manual
Cine 30 HD
- 4 -
3Operation
3.1 Moving of the pan bar
Open the black clamping lever of the pan bar and move the
pan bar into the desired position. Close the clamping lever
of the pan bar. During transportation the pan bar can be
moved next to the tripod legs.
Caution: Open the clamping lever of the pan bar far
enough. The teeth of the pan bar clamp should not clatter
while moving the pan bar. Make sure that the teeth interleave with each other when closing the clamping lever of the
pan bar.
3.2 Levelling of the fluid head
The fluid head has a bubble to faciliate levelling.
Apply the vertical brake of the fluid head and hold the
camera with one hand. Open the tie down of the fluid head
and move the head in such a way, that the bubble moves
into the levels black circle. Tighten the tie down firmly.
Touc h Bub ble
The fluid head has a self illuminating Touch Bubble which
allows easy levelling even under unfavourable lighting conditions.
The illumination is activated by strong tapping on the
bubble. The bubble will light up to 45 seconds.
3.3 Removing of the camera plate
The fluid head comes with a sideload camera plate clamping mechanism.
! Hold the camera plate with one hand.
! Press the red safety lock.
- 5 -
Cine 30 HD
Manual
! Open the sideload lever (about 180°) until the stop
position.
! Press down the snap lock.
! Ta ke o ut t h e c a me ra p l at e .
3.4 Mounting of the camera
Safety lock
Snap lock
Allen screw
for clamping
force adjustment
Sideload lever
Pic. 3
Loading...