1
Copyright Statement
No part of this publication may be reproduced in any form by any means without the prior written
permission. Other trademarks or brand names mentioned herein are trademarks or registered
trademarks of their respective companies.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any
representations or warranties (implied or otherwise) regarding the accuracy and completeness of this
document and shall in no event be liable for any loss of profit or any commercial damage, including but
not limited to special, incidental, consequential, or other damage.
Safety Instructions
Always read the safety instructions carefully
◆Keep this User’s Manual for future reference
◆Keep this equipment away from humidity
◆If any of the following situation arises, get the equipment checked by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or you cannot get it work according to User’s Manual.
2
Table of Contents
1. Introduction ...............................................................................................................4
Features .......................................................................................................................4
Package ..................................................................................................................4
Contents System Requirements ..................................................................................5
LED Status .....................................................................................................................5
2. Installation .....................................................................................................................5
Driver Installation .........................................................................................................................6
Verifying the Driver Installation in Windows ............................................................................12
Connecting to a Network ..........................................................................................................13
Configuring Network Settings .......................................................................................................13
Windows XP/2000/Vista ............................................................................................13
Windows ME/98SE ..............................................................................................................15
3. Specifications...........................................................................................................16
4. Regulatory Compliance ..........................................................................................................17
3
1. Introduction
This USB 2.0 Gigabit Ethernet adapter is a cost effective solution that converts a USB port into a
10/100/1000Base-T Ethernet port. It enables low cost and affordable Gigabit Ethernet network
connection to desktop, notebook PC, and embedded system using popular USB ports. No need to
purchase an expensive Gigabit network interface card and to spare a PCI or Cardbus slot, just using
your existing USB ports and you can upgrade your network connection speed.
Features
◆Supports 10/100/1000 Mbps auto-sensing capability
◆Supports Auto MDIX (straight and cross network cable auto-detection)
◆USB specification 1.0, 1.1 and 2.0 compliant
◆Supports USB full and high speed modes with bus power capability
◆IEEE 802.3, 802.3u, and 802.3ab (10Base-T, 100Base-TX, and 1000Base-T) compatible
◆Supports both full-duplex and half-duplex operation in Fast Ethernet
◆Supports Jumbo packet of up to 9KB
◆Supports suspend mode and remote wakeup via link-up and magic packet
◆Plug and Play Installation
Package Contents
Before installation, please check the items of the package.
◆USB 2.0 Gigabit Ethernet Adapter
◆Driver CD
◆Quick Installation Guide
4
System Requirements
◆Pentium III 800MHz or faster PC with USB 2.0 port
◆256 MB RAM or more
◆Windows_ 98SE/ME/2000/XP/Vista/Linux/Mac
LED Status
LED Color Status Description
Link Green Off Link is not established.
On Link is established.
1000Mbps Green Off Link is not established
Link to 10/100Mbps network.
On Link to 1000Mbps network.
Blinking
There is 1000Mbps traffic flow over the network.
5
2. Installation
Driver Installation
Note: DO NOT connect the Ethernet adapter to your computer before completing the driver installation.
1. Insert the provided CD into your CD-ROM drive.
The setup program will start automatically. If not,
locate and double-click the Setup.exe file in the
Driver folder to launch the setup program.
2. Select Complete and click Next.
6
3. Click Install to start the installation.
4. Click Finish when the installation is complete.
7
5. Select Yes, I want to restart my computer now
and click Finish to reboot your computer.
6. After reboot, connect the Ethernet adapter’s USB
end to a free USB port of your computer. At this
stage, different situations may occur according to
your operation system. Follow the instructions
below to complete the installation.
8
Windows XP / Vista
1. When the Found New Hardware Wizard screen
appears, select Install the software automatically
(Recommended) and click Next.
2 ． If compatibility message appears, just click
Continue Anyway.
9
3. Click Finish to complete the installation.
10
Windows 2000
If Digital Signature Not Found window appears,
just click Yes.
Windows ME
Just wait the system to complete the installation.
Windows 98SE
Upon your USB device connection, if the system
prompts you for the Windows 98SE CD-ROM, click
OK. Remove the provided CD and insert the
Windows 98SE CD-ROM. Then click OK again.
11
Important: Once the above copying files process is done, you must manually restart your computer to
ensure the complete installation. Otherwise some services are not yet installed and the network adapter
will not function properly.
Verifying the Driver Installation in Windows
To verify your Ethernet adapter installation, select Control Panel > System > (Hardware) > Device
Manager. In the Network adapters group, a string similar to USB2.0 to Gigabit Ethernet Adapter should
be displayed.
If there is a question or exclamation
mark next to that item, then the
driver is not properly installed.
Please delete the item and repeat the
installation steps.
*The example screenshot is taken from Windows XP.
12
Connecting to a Network
Now you can connect your network to the device’s LAN port. The LAN port supports Auto-MDIX feature.
It eliminates the need to use crossover cables.
Upon your connection, a message pops up in the notification area indicating your connection speed.
The adapter’s AutoSense feature can automatically detect the network's maximum line speed. To have a
1000Mbps connection, your network device (e.g., switch, router or DSL modem) must also support
1000Mbps.
Configuring Network Settings
You should configure your Ethernet adapter as required according to your network environment. If you
are unsure about the settings, consult your network administrator for assistance. The following
describes how to launch the network settings window for your Ethernet adapter.
Windows XP/2000/Vista
After the installation, a local area connection icon is automatically created for your Ethernet adapter in
the Network Connections folder. You can access Network Connections folder by selecting Start >
Settings > Control Panel > Network and Internet Connections.
In the Network Connections folder, double-click the connection icon for your adapter. Then the
Local Area Connection Properties window appears.
13 14
Windows ME/98SE
Right-click the Network Neighborhood icon on the desktop and select Properties. Then the Network
window appears.
15
3. Specifications
Network Standards IEEE 802.3, 802.3u, and 802.3ab
Data Bus USB 2.0
LED Indicators Link, 1000Mbps
Power
Integrates on-chip 3.3V to 2.5V voltage regulator and
requires only single power supply: 3.3V
Network Interface Female RJ45 jack supporting Auto MDIX
Full Duplex 10BaseT, 100BaseTx, 1000BaseT
Half Duplex 10BaseT, 100BaseTx
RAM
Embedded 20KB SRAM for RX packet buffering and 20KB
SRAM for TX packet buffering
Operating Temperature 0℃ to 70℃
Operating System Support Windows 98SE, ME, 2000, XP ，Vista / Linux / MAC
Certification FCC, CE
* Specification is subject to change without further notice.
16
4. Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received. Including interference that may cause undesired
operation.
CE
This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users: According to the WEEE (Waste electrical and electronic
equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste
electrical and electronic equipment should be appropriately collected and recycled as required by
practices established for your country. For information on recycling of this product, please contact your
local authorities, your household waste disposal service or the shop where you purchased the product.
17
18
Loading...