Rev. 1.4
Sabio Digital SD-KN1
Notebook Assembly Guide
Sabio Digital KN1 Assembly Guide 1 of 11 www.sabioproducts.com
Rev. 1.4
Rev. 1.4
Table of Contents
Section 1.0 - Overview.............................................................................. 3
Section 2.0 - Before You Begin................................................................. 3
Section 3.0 - Barebones Package Contents ............................................. 3
Section 3.1 - Screw Kit Contents ……………………………………………………………4
Section 4.0 - System Component Locator................................................ 5
Section 5.0 - CPU, Thermal Module, & Discrete Graphics Installation ... 6
Section 6.0 - Memory Module Installation............................................... 7
Section 7.0 - Keyboard Installation ......................................................... 8
Section 8.0 - Hard Disk Drive Installation ............................................. 10
Section 9.0 - Installing the Optical Disk Drive....................................... 11
Section 10.0 - Wireless LAN Module Installation .................................. 11
Section 11.0 - Battery Pack Installation and Removal.......................... 11
Copyright 2005, Sabio Digital, Inc.
5125 Convoy Street, Suite 205
San Diego, CA 92111
Office 858-715-0070 – Fax 858-225-3445
http:www.sabioproducts.com
Sabio Digital KN1 Assembly Guide 2 of 11 www.sabioproducts.com
Rev. 1.4
Section 1.0 - Overview
The purpose of this manual is to provide step-by-step assembly instructions for
the Sabio Digital KN1 “barebones” whitebook PC manufactured by Quanta
Computer. The KN1 is a flexible, configurable platform allowing the system
builder to quickly and easily install major components including:
CPU and Thermal Module
Hard Disk Drive
Optical Disk Drive
Wireless LAN Module
Memory Module(s)
Keyboard
Section 2.0 - Before You Begin
Prepare ample work bench space that is clean and free of obstructions.
Use of proper electrostatic discharge equipment including floor mat, bench
mat, and ESD wristband is highly recommended to avoid damaging the
notebook’s motherboard and/or primary components.
Make sure the notebook is disconnected from any power source.
When installing or upgrading components, always remove the battery
pack for the unit. To remove the battery pack, simply slide and hold the
battery latch and remove the battery by lifting up and out.
Always use the appropriate tools. Although the primary tool required for
assembly is a No. 1 Phillips head screw driver, we recommend also using
a single-slot screwdriver for unlocking and locking flexible cable
connectors, and a pair of tweezers to insert and remove flexible cables.
Section 3.0 - Barebones Package Contents
Every Sabio Digital barebones system comes complete with the following system
and system components:
KN1 Barebones System*
Screw Kit
CPU Thermal Module
Keyboard
Hard Disk Drive Kit
Optical Disk Drive
AC Adapter
Power Cord
RJ11 Modem Cable
Driver Disk
Assembly Guide
Sabio Digital KN1 Assembly Guide 3 of 11 www.sabioproducts.com
Rev. 1.4
Check package contents to ensure that all parts have been included. If any parts
are missing, please contact Sabio Digital at 858-715-0070 or send an email to
support@sabioproducts.com. In addition, drivers and a downloadable version of
this manual are available at http://www.sabioproducts.com.
*Barebones System includes upper and lower chassis, motherboard, and LCD.
CPU, memory, wireless card, and hard disk drive are supplied by the system
builder.
Section 3.1 - Screw Kit Contents
The screw kit consists of the following type and sizes of screws:
Description Part Number Quantity
KN1 Screw Kit 1HYEZZZ04Z7 1
Discrete Graphics (M2.0x4.0-NI Nylock) MM20040ICI8 6
Standard Integrated Graphics (M2.0x4.0) 1
Hard Drive Assembly (M3.0x0.5+3.5I) MS30035I354 4
HDD Cover, KB, ODD (M2.5x6.0-I Nylock) MM25060IL69 5
KB Cover Assembly (M2.5x11.0-I Nylock) MM25110IL60 1
Discrete graphics screws are for optional discrete graphics card. The standard
integrated graphics option only requires one screw to secure the module.
Sabio Digital KN1 Assembly Guide 4 of 11 www.sabioproducts.com
Loading...