CM404 NAS
QUICK START GUIDE
Features
Display
Drive bays (4)
Display
control knob
● Includes pre-mounted hard drives
(out-of-the-box capacity depends on
configuration you purchased)
● Toolless, trayless design
● Supports SATA-I and SATA-II drives
● Supports up to 8 TB capacity
● Can be set up as a RAID array
● Gigabit (1,000 Mbps) Ethernet network
● 802.11b/g/n wireless network
● Nero backup software
● Control knob to control status display
● Easy-open, easy-close drive bay doors
● Compact and attractive case
● Integrated media server with iTunes®
server and UpnP Media streaming
● LCD status screen
● Toolless swappable drives
● Can send status updates by e-mail
● One-touch USB backup to/from NAS
Indicators
USB
ports
Power
switch
Power
connector
Setting Up
RJ45 (Ethernet)
jack
USB transfer
button
USB transfer
indicator
Ventilation fan
(do not block)
Package Contents
● CM404 NAS
● AC power adapter
● Antennas (2)
● Ethernet cable
● User Guide
● Quick Start Guide
● Nero 8 Essentials
backup software CD
If any items are missing from
your product packaging,
contact Customer Support
immediately at
www.sabioproducts.com.
What You Need
Wired network
(required for first-time setup)
Unpack the box, remove the NAS, then make sure that each of the drive bay
doors is securely shut.
Caution: The drives are not hot swappable. To exchange
or add a drive, you must first turn off the NAS.
Wireless network
(optional for everyday use)
continued...
Connect the Ethernet cable to the
Ethernet jack on the back of the NAS,
then to any open port on your
network, switch, or router. Make sure
that all devices you want to have
access to the NAS are on the same
network.
● The Ethernet cable is required for
first-time setup.
● If you will use a wireless connection,
also attach the two antennas to the
back of the NAS.
Connect the DC power cable to the DC IN
power connector on the back of the NAS,
press the top of the rear POWER switch to
the “I” (on) position, then press the front
power button. The power indicator turns on.
Front panel
indicators
192.168.1.007
Antennas
When the Sabio Storage
login screen opens, type
admin for both the
Ethernet jack
username and the
password, then click
Login. The main menu
opens.
To set up a the drives as
standard, standalone
DC power connectorPOWER switch
drives, click Maintenance,
Disk Utility, then change
settings as needed and
Power button
LAN
RAID
Alarm
Drive 1 active
Drive 2 active
click Format for each drive
you want to use. Your NAS
reboots after each format.
- OR -
To set up a RAID array, click
Maintenance, then click
RAID Setting. Change the
settings as needed, then
click Create raid system.
Drive 3 active
Drive 4 active
Your NAS reboots.
When the display changes from “Booting” to “IP Address,”
enter the number that’s displayed into your Web browser’s
address line, then press Enter.
Note: The computer that you use for this step must be
on the same network as the CM404.
Tip: If the IP address doesn’t appear on the display,
rotate the display control knob until it does.
All contents © copyright 2009 Sabio Storage, Inc.
For More Information...
ZSD001QCM404-QSV1Z
Log in as admin, click Quick
Setup, then click Wizard and
follow the on-screen
instructions to set up basic
configuration for your NAS.
After the setup wizard is complete:
● To set up wireless connectivity, click the Control Panel tab,
then click System, then Wireless Settings.
● To format any of the installed drives, click the Control Panel
tab, then click Maintenance, then Disk Utility.
● To set up a RAID array, click the Control Panel tab, then click
Maintenance, then RAID Setting.
See the User Guide that came with
your system, or visit us online at
www.sabioproducts.com.
Loading...