SA saxo 3 active, saxo 7 active User Manual

SA saxo 3 and 7 active

User guide in English

vers. 2 .eng

Read the user guide and
get 20% better sound

You are the owner of one of the best wireless speakers on the market. This user
guide can help you to get a 20% better sound than if you simply connect up the
speakers, so take a moment to read it.

Welcome

Thank you for choosing SA.
I am responsible for the technology in
the speakers and here you get
help to get started.

The package contains two speakers, a
remote control, a speaker cable, a power
cable and a user guide.

Read the user guide and note the points
highlighted with TIP.

Follow these and you will get the full benefit
from your new speakers.

If you have any questions you are welcome
to write to us on facebook.

We will respond quickly.

Enjoy.

Ole Witthøft

Collect your audio
experiences

With wireless SA speakers in the living
room, you can collect your audio
experiences in one place.

The speakers can be connected to
anything from your computer, television,
games console or iPod and you can
hear high quality music from your
wireless devices via Bluetooth.

SA saxo active consists of two

speakers. One active and one passive.
The active one must be connected to
the devices you want to listen to and is
connected to 230 V.

The two speakers must also be
connected to each other with the
supplied cable.

On or standby

Blue light means the speaker is on.

Orange light means standby.

Orange light flashing means

standby, with auto-sense on.

TIP. The speaker goes into standby

after about 20 minutes with no signal.

Bluetooth indicator

The white light to the right indicates the
speaker's Bluetooth.

Flashing light. The speaker is
searching for other Bluetooth devices

Steady light. The speaker is paired with
a Bluetooth device

No light. The speaker is not using
Bluetooth input.

Button with three functions

Turn. Increase or decrease the volume .

Short click. Switch between inputs

Longer pressure. Turn speaker on

or put it in standby .

TIP. You can turn the speaker on by

pressing the button through the fabric at the

front of the speaker .

Good to know about the speaker

Auto-sense

When SA saxo active receive signal at an
input while it is turned off (incl bluetooth) it
switches on automatically, and switches to
the correct input.

Auto-sense can be turned on and off, by
holding the button for 5 seconds.