SA BT82, BT82i, BT82T*, BT82iT8, BT82T32 Installation Insrtuctions
...
INSTALLATION INSTRUCTIONS
SA
SOUND ADVANCE
R
BT82 Loudspeaker
with Accessories
SOUND ADVANCE SYSTEMS
MODEL: BT82, BT82i, BT82T8, BT82iT8, BT82T32, BT82iT32
MOUNTING LOCATIONS: Truss, Joist, Beam, Pole, Column, Wall Mount or Pendant Hang.
SUPPLIED ACCESSORIES: Neutrik Speakon® NL4CFC S.A.S p# 211.002
REQUIRED ACCESSORIES: EBLT-M, BKT-L, STND-U
TECHNICAL SPECIFICATIONS
DIMENSIONS
Unless otherwise specified all dimensions are in
inches (mm)
WEIGHT
BT82, BT82i 14.2 lbs. (6.42 kg.); BT82T8, BT82iT8
14.9 lbs ( 6.79 kg.); BT82T32, BT82iT32 15.5 lbs . (7.05
kg.).
MODELS
BT82 - 8 ohms, Dual Driver Outdoor Speaker
BT82T8 - Dual Driver Outdoor Speaker W/8 Watt
Transformer
BT82T32 - Dual Driver Outdoor Speaker W/32
Watt Transformer
BT82i - 8 ohms, Dual Driver Indoor Speaker
BT82iT8 - Dual Driver Indoor Speaker W/8 Watt
Transformer
BT82iT32 - Dual Driver Indoor Speaker W/32
Watt Transformer
fig. 1
25.12 [638]
4.50 [114]
16.12 [409]
4.35 [111]
5/15 18TPI
8 PLCS.
5.14 [130]
4.50 [114]
19.18 [487]
RECOMMENDED MOUNTING LOCATIONS
SOUND AD VANCE products provide outstanding
performance and economic advantages when installed
in environments with an ambient noise lev el at or belo w
75dBA, where the speakers can be placed between 8
and 18 feet abov e the floor, and which are large enough
to accommodate at least 4 or more conventional
loudspeakers. When system design requirements
indicate speaker to speaker distances of greater than
40.0 ft., please contact the factory for additional technical information on such applications.
Truss, Joist, Beam, P ole , Column, Wall Mount or
P endant Hang Using Optional Accessories
RECOMMENDED ENVIRONMENTS
Outdoor - BT82 Series (black finish only)
Indoor - BT82i Series (black or white finish)
FACTORY PROVIDED FINISH
BT82 Series, black finish only
BT82i Series, black or white finish
BT82 www.video-car.it
ACCESSORIES DATA
INSTALLATION HARDWARE
EBLT-M Includes two
5/16 in. (0.8 cm ) e y ebolts
with hex nuts. W eight 0.15
lbs. ( 0.07 kg.)
STND-U Includes
“U” bracket, knobs and
hardware for tilt/s wiv el
mounting W eight 5.2
lbs. (2.35 kg.)
1.30 [33]
Ø.75 [19]
JAM NUT
5/16 18TPI
.75 [19]
BKT-L Includes two
“L” brack ets with hardware .
Weight 1.4 lbs. (0.64 kg.)
5.20 [132]
.25 [6]
.19 [5]
2.23 [57]
Ø.37 [10]
27.44 [697]
Ø.75 [19]
16.12 [409]
25.92 [658]
1.00 [25]
1.00 [25]
2.00 [51]
13.60 [345]
IMPORTANT NOTE: The pr oper orientation for any
BT82 series product is perpendicular to the floor
and wall of the area in question. For any other
orientation please consult with the factory before
installation or specification.
5.10 [130]
.56 [14]
3.00 [76]
1.00 [25]
6.00 [152]
1.00 [25]
2.00 [51]
.56 [14]
Ø.35 [9]
3.00 [76]
Page 2BT8 www.video-car.it
Loading...