S2Konnect S-8180T
S2Konnect S-8180T
Unmanaged Gigabit Ethernet Switch
User Manual
2
S2Konnect S-8180T
3
Copyright © S2Konnect GmbH, 2009. All rights reserved.
This manual refers to the S2Konnect S-8180T Unmanaged Switches. Contents are subject to change
without notice.
Product and brand names are (registered) trademarks of their appropriate owners.
If you have comments on this documentation, please send to:
S2Konnect GmbH
Siemensstrasse 23
76275 Ettlingen / Germany
http://www.s2konnect.com
S2Konnect S-8180T
4
Conventions
The following conventions apply to this manual.
Warning and Notes
Used to indicate a potentially hazardous situation which, if not avoided, could result in death
or serious injury. Example: dangerous voltage.
Used to indicate a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury. Example: electrostatic discharge.
Used for additional information and advice.
!
i
S2Konnect S-8180T
5
Table of Contents
Conventions 4
Warning Notes 4
Safety Precautions 7
Avoiding injuries 7
Avoiding damage 7
1 Installation of the S2Konnect Unmanaged Switch 8
Installation on a Level Surface 8
Installation on a Wall 8
Installation in a Rack 9
2 Connection of the S2Konnect Unmanaged Switch 10
Transmission Distances 10
Connection to the Network 10
Connection to other Switches 11
3 Features 12
Type of Switch 12
Front Panel 12
Rear Panel 13
RJ-45 Switch Ports 13
SFP Port 13
LED Displays 13
4 Important Information 13
Technical Support 13
Returning an S2Konnect Unmanaged Switch of Repair 13
Technical Specications 14
Appendix A. License and Warranty Information 16
The Americas, Asia, Australia, New Zealand, Pacic 16
Europe 17
Deutschland, Schweiz, Österreich, Lichtenstein 18
S2Konnect S-8180T
Table of Figures
Figure 1 : Wall Installation
Figure 2 : Rack Installation
Figure 3 : Connection of the RJ-45 cable/plug
Figure 4 : Connection of Switches
Figure 5 : Front Panel of the S-8180T
Figure 6 : Rear Panel of the S2Konnect Unmanaged Switches
Figure 7 : Location of the LEDs
6
Loading...