Ryobi Outdoor SS30, CS30, BC30, ZR30004, ZR30000 User Manual
...
OPERATOR'S MANUAL
30cc String Trimmers and Brushcutter
ZR30000 Series
SS30
ZR30002
CS30
ZR30000
BC30
ZR30004
Your trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator
safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before
using this product.
Thank you for buying a Ryobi trimmer.
SAVE THIS MANUAL FOR FUTURE REFERENCE
TABLE OF CONTENTS
■■
■ Introduction ................................................................................................................................................................. 2
■■
■■
■ General Safety Rules .................................................................................................................................................. 3
■■
■■
■ Specific Safety Rules .................................................................................................................................................. 4
■■
■■
■ Symbols ................................................................................................................................................................. 5 - 6
■■
■■
■ Specifications .............................................................................................................................................................. 7
■■
■■
■ Unpacking ................................................................................................................................................................... 7
■■
■■
■ Features ................................................................................................................................................................. 8 - 9
■■
■■
■ Assembly ........................................................................................................................................................... 10 - 14
■■
■■
■ Operation ............................................................................................................................................................ 15 - 18
■■
■■
■ Maintenance ....................................................................................................................................................... 19 - 22
■■
■■
■ Troubleshooting ................................................................................................................................................... 23 - 24
■■
■■
■ Warranty ............................................................................................................................................................. 25 - 26
■■
INTRODUCTION
Trimming weeds and grass is an easy task using Ryobi Trimmers and Brushcutters. Safety, performance, and dependability
have been given top priority in the design of this string trimmer making it easy to maintain and operate.
Page 2
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire and/or serious personal injury.
READ ALL INSTRUCTIONS
■ For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
■ Do not allow children or untrained individuals to use this
unit.
■■
■ Never start or run the engine in a closed or poorly
■■
ventilated area; breathing exhaust fumes can kill.
■■
■ Clear the work area before each use. Remove all objects
■■
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the cutting line or
blade.
■■
■ Wear safety glasses or goggles that are marked to
■■
comply with ANSI Z87.1 standard when operating this
product.
■■
■ Product users on United States Forest Service land, and
■■
in some states, must comply with fire prevention
regulations. This product is equipped with a spark
arrestor; however, other user requirements may apply.
Check with your federal, state, or local authorities.
■■
■ Wear heavy, long pants, boots, and gloves. Do not wear
■■
loose fitting clothing, short pants, or go barefoot. Do not
wear jewelry of any kind.
■■
■ Never operate this unit on the operator's left side.
■■
■■
■ Secure long hair above shoulder level to prevent en-
■■
tanglement in moving parts.
■■
■ Keep all bystanders, children, and pets at least 15 m
■■
(50 ft.) away.
■■
■ Do not operate this unit when you are tired, ill, or under
■■
the influence of alcohol, drugs, or medication.
■■
■ Do not operate in poor lighting.
■■
■■
■ Keep firm footing and balance. Do not overreach.
■■
Overreaching can result in loss of balance or exposure
to hot surfaces.
■■
■ Keep all parts of your body away from any moving part.
■■
■■
■ To avoid hot surfaces, never operate the unit with the
■■
bottom of the engine above waist level.
■■
■ Do not touch area around the muffler or cylinder of the
■■
unit, these parts get hot from operation.
■■
■ Always stop the engine and remove the spark plug wire
■■
before making any adjustments or repairs except for
carburetor adjustments.
■■
■ Inspect the unit before each use for loose fasteners, fuel
■■
leaks, etc. Replace any damaged parts before use.
■■
■ The string head or blade will rotate during carburetor
■■
adjustments.
■■
■ It has been reported that vibrations from hand-held tools
■■
may contribute to a condition called Raynaud’s Syndrome in certain individuals. Symptoms may include
tingling, numbness and blanching of the fingers, usually
apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking and work
practices are all thought to contribute to the development of these symptoms. It is presently unknown what,
if any, vibrations or extent of exposure may contribute to
the condition. There are measures that can be taken by
the operator to possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When operat-
ing the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major
factor contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
d) Keep the tool well maintained, fasteners tightened
and worn parts replaced.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician
about these symptoms.
■■
■ Mix and store fuel in a container approved for gasoline.
■■
■■
■ Mix fuel outdoors where there are no sparks or flames.
■■
Wipe up any fuel spillage. Move 9 m (30 ft. ) away from
refueling site before starting engine.
■■
■ Stop the engine and allow to cool before refueling or
■■
storing the unit.
■■
■ Allow the engine to cool; empty the fuel tank and secure
■■
the unit from moving before transporting in a vehicle.
Page 3
SPECIFIC SAFETY RULES
SPECIFIC SAFETY RULES FOR TRIMMER
USE
■■
■ Replace string head if cracked, chipped, or damaged in
■■
any way. Be sure the string head or blade is properly
installed and securely fastened. Failure to do so can
cause serious injury.
■■
■ Make sure all guards, straps, deflectors and handles are
■■
properly and securely attached.
■■
■ Use only the manufacturer's replacement string in the
■■
cutting head. Do not use any other cutting attachment.
To install any other brand of cutting head to this string
trimmer can result in serious personal injury.
■■
■ Never operate unit without the grass deflector in place
■■
and in good condition.
■■
■ Maintain a firm grip on both handles while trimming.
■■
Keep string head below waist level. Never cut with the
string head located over 76 cm (30 in.) or more above
the ground.
SPECIFIC SAFETY RULES FOR
BRUSHCUTTER AND BLADE USE
■■
■ After engine stops, keep rotating blade in thicker weeds
■■
or pulpy stalks until it stops.
■■
■ Do not operate the brushcutter unless the brushcutter
■■
guard is firmly secured in place and in good condition.
■■
■ Use heavy gloves when operating the brushcutter and
■■
when installing or removing blades.
■■
■ Always stop the engine and remove the spark plug wire
■■
before attempting to remove any obstruction caught or
jammed in the blade or before removing and installing
the blade.
■■
■ Do not attempt to touch or stop the blade when it is
■■
rotating.
■■
■ A coasting blade can cause injury while it continues to
■■
spin after the engine is stopped or throttle trigger
released. Maintain proper control until the blade has
completely stopped rotating.
■■
■ Replace any blade that has been damaged. Always
■■
make sure blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
■■
■ Use only the manufacturer's replacement TRI-ARC®
■■
blade intended for use on this brushcutter. Do not use
any other blade. To install any other brand blade or
cutting head to this brushcutter can result in serious
personal injury.
■■
■ The TRI-ARC® blade is suited for cutting thicker weeds
■■
or pulpy stalks only. Do not use for any other purpose.
Never use the TRI-ARC® blade to cut woody brush.
■■
■ Exercise extreme caution when using the blade with this
■■
unit. Blade thrust is the reaction that may occur when
the spinning blade contacts anything it cannot cut. This
contact may cause the blade to stop for an instant, and
suddenly “thrust” the unit away from the object that was
hit. This reaction can be violent enough to cause the
operator to lose control of the unit. Blade thrust can
occur without warning if the blade snags, stalls, or binds.
This is more likely to occur in areas where it is difficult to
see the material being cut. For cutting ease and safety,
approach the weeds being cut from the right to the left. In
the event an unexpected object or woody stock is
encountered, this could minimize the blade thrust
reaction.
■■
■ Never cut any material over 13 mm (1/2 in.) diameter.
■■
■■
■ Always wear the shoulder harness when using the
■■
brushcutter and adjust to a comfortable operating
position. Maintain a firm grip on both handles while
cutting with a blade. Keep the blade away from body and
below waist level.
■■
■ Never use the brushcutter with the blade located 76 cm
■■
(30 in.) or more above the ground level.
Page 4
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning for safe operation
of this product.
SYMBOL NAME EXPLANATION
Safety Alert Symbol Precautions that involve your safety.
.
Read the Operator’s Manual To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Wear Eye and Hearing Protection Wear eye protection which is marked to comply with
ANSI Z87.1 as well as hearing protection when
operating this equipment.
Keep Bystanders Away Keep all bystanders at least 50 ft. (15 m) away.
50' 15m
Ricochet Thrown objects can ricochet and result in personal
injury or property damage.
No Blade Do not install or use any type of blade on a product
displaying this symbol.
Blade Thrust Beware of blade thrust. Products authorized for blade
use will display this symbol to warn of blade thrust.
Gasoline and Oil Use unleaded gasoline intended for motor vehicle
use with an octane rating of 87 ([R + M] / 2) or higher.
This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle oil.
Page 5
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE DEALER for repair. When servicing, use only identical replacement parts.
WARNING:
WARNING:
To avoid serious personal injury, do not attempt to
operate this product until you read thoroughly and
understand completely the operator's manual. Save this
operator's manual and review frequently for continuing
safe operation and instructing others who may use this
product.
Observe all normal safety precautions related to avoid
electrical shock.
WARNING:
The operation of any product can result in foreign objects being thrown into your eyes, which can result in
severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side
shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses
or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
SAVE THESE INSTRUCTIONS
Page 6
SPECIFICATIONS
Weight - (without fuel)
ZR30000 ............................................................................................................................................. 10.7 lbs. (4.9 kg.)
ZR30002 ............................................................................................................................................. 12.1 lbs. (5.4 kg.)
ZR30004 ............................................................................................................................................. 12.9 lbs. (5.9 kg.)
String cutting width
ZR30000 ................................................................................................................................................ 17 in. (432 mm)
ZR30002 ................................................................................................................................................ 18 in. (457 mm)
ZR30004 ................................................................................................................................................ 18 in. (457 mm)
Blade cutting width
ZR30004 ......................................................................................................................................................... 8 in. (203)
Engine displacement ............................................................................................................................................... 30cc
String diameter
ZR30000 .............................................................................................................................................. .080 in. (2.0 mm)
ZR30002 .............................................................................................................................................. .095 in. (2.4 mm)
ZR30004 .............................................................................................................................................. .095 in. (2.4 mm)
UNPACKING
INSTRUCTIONS
■■
■ Carefully remove the product from the carton.
■■
■■
■ Inspect the product to make sure no breakage or
■■
damage occurred during shipping.
■■
■ Do not discard the packing material until you have
■■
inspected and operated the product.
■■
■ If any parts are damaged or missing, please call
■■
1-800-860-4050 for assistance.
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
PACKING LIST - ZR30000
■■
■ Trimmer Assembly
■■
■■
■ Owner’s Kit
■■
■■
■ Front handle
■■
■■
■ Curved Shaft Grass deflector
■■
■■
■ Hardware Bags (2)
■■
■■
■ Hanger Cap
■■
■■
■ Operator's manual
■■
PACKING LIST - ZR30002
■■
■ Trimmer Assembly
■■
■■
■ Owner’s Kit
■■
■■
■ Front handle
■■
■■
■ Straight Shaft Grass deflector
■■
■■
■ Hardware Bags (2)
■■
■■
■ Hanger Cap
■■
■■
■ Operator's manual
■■
PACKING LIST - ZR30004
■■
■ Trimmer Assembly
■■
■■
■ Owner’s Kit
■■
■■
■ “J” Barrier Handle
■■
■■
■ Straight Shaft Grass Deflector
■■
■■
■ Gear Head Locking Tool
■■
■■
■ Hardware Bag
■■
■■
■ Shoulder Harness
■■
■■
■ String Head Assembly
■■
■■
■ Hanger Cap
■■
■■
■ Operator's manual
■■
Page 7
FEATURES
ZR30000
DRIVE SHAFT
HOUSING
COUPLER
CURVED SHAFT GRASS
DEFLECTOR
STARTER
REAR HANDLE
FRONT HANDLE
KNOB
GRIP
THROTTLE TRIGGER
PRIMER
BULB
CHOKE LEVER
STRING HEAD
Fig. 1a
Page 8
FEATURES
STRING
HEAD
ZR30002
DRIVE SHAFT
HOUSING
COUPLER
STRAIGHT SHAFT
GRASS DEFLECTOR
STARTER GRIP
REAR HANDLE
FRONT HANDLE
KNOB
PRIMER
BULB
CHOKE LEVER
THROTTLE TRIGGER
BLADE
ZR30004
DRIVE SHAFT
HOUSING
“J” BARRIER
HANDLE
COUPLER
KNOB
STARTER
GRIP
REAR HANDLE
SHOULDER HARNESS
Fig. 1b
PRIMER
BULB
CHOKE LEVER
THROTTLE TRIGGER
BRUSHCUTTER GUARD
Fig. 1c
Page 9
Loading...