CORDLESS GRASS SHEAR / SHRUBBER
OPERATOR’S MANUAL (Original Instructions)
Important! It is essential that you read the instructions in this manual before operating
this machine.
Subject to technical modifications.
CGS1820LBC
GripZone
GripZone
GripZone
GripZone
GripZone
GripZone
2
Fig. 1
Fig. 2 Fig. 3 Fig. 5
Fig. 4
1
1
7
6
11
11
4
3
3
3
10
7
4
3
5
9
8
2
2
2
CGS1820LBC
2
English (Original Instructions)
Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for tone type
of battery pack may create a risk of fire when used with
another battery pack.
RULES FOR SAFE OPERATION
The tools should be operated with the ONE+ battery pack.
WARNING
When using battery operated tools basic safety
precautions should always be followed to reduce
the risk of re, leaking batteries and personal injury,
including the following.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or batteryoperated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
3
English (Original Instructions)
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
READ ALL INSTRUCTIONS BEFORE OPERATING
Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
Do not operate this unit when tired, ill, or under the
inuence of alcohol, drugs, or medication.
Inspect the unit before use. Replace damaged parts.
Check for battery pack leaks.
Do not operate this unit in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust.
Make sure all fasteners and guards are in place and
secure. Replace cutting blades or any other parts
that are cracked, chipped, or damaged. Make sure
the cutting blade is properly installed and securely
fastened. Failure to do so can result in personal injury
to the operator and bystanders, as well as damage to
the unit.
Use the right tool. Only use this grass shear / shrubber
for the purpose intended.
Do not use grass shear / shrubber if switch will not turn
the unit on or off. A unit that cannot be controlled with
the switch is dangerous and must be repaired.
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
Clear the area of children, bystanders, and pets. At
a minimum, keep all children, bystanders and pets
outside a 15m radius; there still may be a risk to
bystanders from thrown objects. Bystanders should
be encouraged to wear eye protection. If you are
approached, stop the unit immediately.
To avoid the risk of electric shock, do not operate unit
in damp or wet locations.
Do not handle the unit with wet hands.
Do not allow children under the age of 15 or untrained
individuals to use this grass shear / shrubber.
To reduce the risk of injury, always wear full eye
protection, footwear, goggles and clothing when using
this machine.
Wear a face or dust mask if the operation is dusty.
Dress properly. Do not wear loose clothing or
jewellery; they can be caught in moving parts. Use of
rubber gloves, substantial footwear and long trousers
is recommended when working outdoors.
To prevent hair from being drawn into nearby air
vents and becoming entangled in moving parts, wear
protective hair covering to contain long hair or secure
covered hair above shoulder level.
When transporting or storing the machine always t
with blade cover.
Always be aware of your surroundings and stay alert
for possible hazards that you may not hear due to the
noise of the machine.
Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before
turning it on.
Always ensure all the handles and guards are tted
when using the tool.
Never attempt to use an incomplete machine or one
tted with an unauthorised modication.
The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used. Need to identify
safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger
time).
WHILE OPERATING
To avoid accidental starting, never carry your unit with
your nger on the trigger.
Stay alert and pay attention to what you are doing.
Use common sense when using this grass shear /
shrubber.
Wear heavy, long pants, substantial footwear and well
tting gloves. Do not wear short pants, sandals or go
barefoot.
Do not operate in poor lighting. Use the unit only in
daylight or good articial light.
Do not overreach or stand on unstable support. Keep
good footing and balance at all times. Do not use on
ladder.
4
English (Original Instructions)
Replace blade cover when unit is not in use.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use, see Storage instructions.
Be sure to secure the unit while transporting.
Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
SERVICE
Service on unit must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury
to the user, or damage to the unit. It may also void
your warranty.
When servicing a unit, use only identical replacement
parts. Follow instruction in the Maintenance section
of this manual. Use of unauthorised parts or failure to
follow Maintenance Instructions may create a risk of
shock or serious injury to the user, or damage to the
unit. It may also void your warranty.
BATTERY TOOL USE AND CARE
Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power
tools that have the switch on invites accidents.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
WARNING
If any parts are missing, do not operate unit until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
SAVE THESE INSTRUCTIONS. REFER TO THEM
FREQUENTLY AND USE THEM TO INSTRUCT OTHERS
WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE
THIS UNIT, LOAN THEM THESE INSTRUCTIONS ALSO.
Do not force the grass shear / shrubber. It will do the
job better and with less likelihood of a risk of injury at
the rate for which it was designed.
Release the trigger, allow the motor to stop,
and remove the battery pack before performing
maintenance, repair, or making adjustments.
Use grass shears for cutting grass and light weeds
only. Use shrubber for cutting hedges, bushes and
shrubs only. Do not use for any other purpose.
Before starting the unit, make sure the cutting blades
will not come in contact with anything. If you strike or
become entangled with foreign objects, stop the unit
immediately, remove the battery pack and check for
damage. Do not operate before repairing damage. Do
not operate the unit with loose or damaged parts.
Watch what you are doing. Use common sense.
Maintain grass shear / shrubber with care. Keep
cutting edge sharp and clean for best performance
and to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Keep handles
dry, clean, and free from oil and grease.
Check damaged parts. Before further use of the grass
shear / shrubber, a guard or other part that is damaged should be carefully checked to determine that it
will operate properly and perform it's intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect it's operation. A guard
or other part that is damaged should be properly
repaired or replaced by a Authorised Service Centre
unless indicated elsewhere in this manual.
Risk of cut. Keep hands away from blades. Do not
attempt to remove cut material or hold material to be
cut when blades are moving. Make sure battery pack
is removed and the trigger is released when clearing
jammed material from blades. Do not grasp the
exposed cutting blades or cutting edges when picking
up or holding the unit.
CAUTION
Blades coast after unit is turned off.
Keep hands, face, and feet at a safe distance from
moving parts. Do not touch or try to stop the cutting
blades when they are moving.
Always stop the motor when cutting is delayed or
when walking from one cutting location to another.
Keep unit clean of grass clippings and other materials.
They may become lodged in the cutting blades.
Store the unit inside in a dry place, either locked up or
up high to prevent unauthorised use or damage. Keep
out of the reach of children or untrained individuals.
5
English (Original Instructions)
Some of the following symbols may be used on this tool. Please study them and understand their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Precautions that involve your safety.
Read The Operator’s
Manual
Read the operation manual and follow all warnings and safety
instructions.
Wear Eye, Head and
Hearing Protection
Wear eye protection which is marked to comply with standards
as well as head and hearing protection when operating this
equipment.
Ricochet alert
Thrown objects can ricochet and result in personal injury or
property damage. Wear protective clothing and boots.
Wear protective gloves Wear non-slip, heavy-duty protective gloves.
Keep bystanders away
Keep all bystanders, especially children and pets, at least 15m
from the operating area.
Wet conditions alert Do not expose to rain or damp conditions.
Sharp cutting blades. To prevent serious injury, do not touch cutting blades.
Caution! Cutting means continues to run after the motor is switched off.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
SYMBOLS
6
English (Original Instructions)
SPECIFICATIONS
Product Specifications
Model CGS1820LBC
Motor 18 V
No Load Speed 1200 min
-1
Shrubber blade
cutting length
200 mm
Grass shear blade
width
100 mm
Sound pressure
level
LPA=68 dB(A), KPA=3 dB(A)
Measured sound
power level
LWA=88 dB(A), KWA=3 dB(A)
Vibration ah= 2.3 m/s2 ,K=1.5 m/s
2
Weight with battery pack
With grass shear
blade
1.5 Kg
With shrubber
blade
1.7 Kg
Battery Pack 1 x BPL-1815
Compatible
Battery Packs
ABP1801 / ABP1802 / BPL-1820 /
BPL-1815 / BPL-1820G
Charger 1 x BCL1418
Compatible
Charger
BCL-1800 / BCL1418
(for all compatible battery packs)
ACR-1800
(only for ABP1801 / ABP1802)
FEATURES
FIG. 1
1. Rear Handle
2. Trigger Lock Button
3. Trigger
4. Shrubber Blade
5. Shrubber Blade Cover
6. Grass Shear Blade Cover
7. Grass Shear Blade
FIG. 2
8. Battery Pack
9. Latches
FIG. 3
2. Trigger Lock Button
3. Trigger
FIG. 5
4. Shrubber Blade
7. Grass Shear Blade
10. Blade Securing Knob
11. Blade Post
OPERATION
INSTALLING THE BATTERY PACK
See Figure 2.
Place the battery pack in the grass shear / shrubber.
Align raised rib on battery pack with groove in grass
shear / shrubber.
Make sure the latches on the battery pack snap in
place and that battery pack is secured in grass shear /
shrubber before beginning operation.
REMOVING THE BATTERY PACK
See Figure 2.
Locate latches of battery pack and depress to release
the battery pack from the grass shear / shrubber.
Remove battery pack from the grass shear / shrubber.
CAUTION
When placing battery pack in your grass shear /
shrubber, be sure raised rib on battery pack aligns with
groove in grass shear / shrubber and latches snap in
place properly. Improper assembly of battery pack can
cause damage to internal components.
STARTING THE GRASS SHEAR / SHRUBBER
Remove the blade cover.
Press and hold the trigger lock button. See Fig. 3
Release the trigger lock button and continue to
squeeze the trigger for extended operation.
STOPPING THE GRASS SHEAR / SHRUBBER
Release the trigger to stop the grass shear / shrubber.
Upon release of the trigger, the trigger lock button will
be automatically reset to the lock position.
OPERATING TIPS
Before starting your grass shear / shrubber, hold the
unit with the cutting blades directed away from you.
Always use the unit properly.
Keep from trimming too close to dirt, sand or gravel.
This can cause the blades to dull, reducing the cutting
efficiency.
Do not force the unit through dense growth. If the
7
English (Original Instructions)
CAUTION
Do not at any time let brake uids, gasoline, petroleum
based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that may
damage, weaken, or destroy plastics.
MAINTENANCE AND REPAIR
BLADE CARE
Lubricate the cutting blades after each use.
Periodically inspect the blades for damage and wear.
Always use the manufacturer's specified replacement
blades.
TO LUBRICATE BLADE
Remove battery pack from unit.
For easier operation and longer blade life, lubricate
the shrubber blade before and after each use. Before
lubricating, remove the battery pack and lay shrubber
blade on a flat surface. Apply light weight machine oil
along the edge of the top blade.
Occasionally, you should oil your shrubber blade
during use. Before oiling, stop the unit, remove battery
pack, then oil. You then can resume trimming. Do not
oil while shrubber blade is running.
GRASS SHEAR / SHRUBBER LUBRICATION
All of the gear system in this tool are lubricated with a
sufcient amount of high-grade lubricant for the life of the
unit under normal operating procedures.
Therefore, no further lubrication is required.
WARNING
Do not attempt to modify this unit or create or mount
any accessory not specically recommended in this
manual for use with this unit. Any such alteration or
modication is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING
Examine shrubber blade frequently to assure all parts
are unbroken and securely attached. Make sure all
screws and fasteners are securely tightened to prevent
the risk of serious personal injury.
blades slow down, reduce your pace.
If blades do become jammed, stop the motor, allow
the blades to stop and remove the battery pack before
attempting to remove the obstruction.
HOLDING THE GRASS SHEAR / SHRUBBER
WARNING
Dress properly to reduce the risk of injury when
operating this unit. Do not wear loose clothing or
jewelry. Always wear eye protection when in use. Wear
heavy, long pants, boots and well tting gloves. Do not
wear short pants, sandals or go barefoot.
Hold the unit by the rear handle with the blade directed
away from you. See Figure 4
USING THE GRASS SHEAR
See Figures 4.
Use the grass shear for decorative trimming of grass
around trees, walkways, flower beds, etc.
With the blade parallel to the ground, start unit and trim
grass in a forward motion.
DANGER
If blade jams on any electrical cord or line, DO
NOT TOUCH THE BLADE! IT CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the grass shear / shrubber by the
insulated rear handle or lay it down and away from you
in a safe manner. Disconnect the electrical service to
the damaged line or cord before attempting to free the
blade from the line or cord. Failure to heed this warning
will result in serious personal injury or possible death.
WARNING
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade and create a risk
of serious personal injury.
WARNING
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, oil, grease, etc.
When servicing use only identical Ryobi replacement
parts. Use of any other parts can create a hazard or
cause product damage.
8
English (Original Instructions)
CLEANING THE GRASS SHEAR / SHRUBBER
Remove the battery pack.
WARNING
To prevent serious personal injury, remove the battery
pack before servicing, cleaning, or removing material
from the unit.
Clean the unit using a damp cloth with a mild detergent.
Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by
certain aromatic oils such as pine and lemon, and by
solvents such as kerosene.
Moisture can cause a shock hazard. Wipe off any
moisture with a soft dry cloth.
Use a small brush or the air discharge of a small
vacuum cleaner brush to clean the air vents on the
battery pack housing and motor housing.
Keep the air vents free of obstructions.
STORING THE GRASS SHEAR / SHRUBBER
Clean the unit thoroughly before storing. Store the
cutting blade in a dry, well-ventilated place that is
inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
Always place blade cover on cutting blades before
storing.
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
Never store batteries in a discharged condition. Wait
for battery pack to cool and charge immediately.
All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your unit for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery pack life.
DISPOSAL
Waste electrical products should not be
disposed of together with household waste.
Please recycle where facilities exist. Check
with your local authority or retailer for recycling
advice.
TTI warrants this outdoor product to be free of defects in material and workmanship for 24 months from the date of purchase by the original
purchaser, subject to the limitations below. Please keep your invoice as proof of date of purchase.
This warranty is only applicable where the product is used for personal and non-commercial purposes. This warranty does not
cover damage or liability caused by / due to misuse, abuse, accidental or intentional acts by user, improper handling, unreasonable use,
negligence, failure by end user to follow operating procedures outlined in the user’s manual, attempted repair by non-qualied professional,
unauthorised repair, modication, or use of accessories and/or attachments not specically recommended by authorised party. Please see
your local dealer for list of authorised service centres in your area.
This warranty does not cover belts, brushes, bags, bulbs or any part which ordinary wear and tear results in required replacement during
warranty period. This warranty does not cover transportation cost or consumable items such as fuses and batteries.
This limited warranty is void if the product’s original identication (trade mark, serial number, etc.) markings have been defaced, altered or
removed or if product is not purchased from an authorised reseller or if product is sold AS IS and / or WITH ALL FAULTS.
Where permitted, the provisions of this limited warranty are in lieu of any other written warranty, whether express or implied, written or oral,
including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE
FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES. OUR MAXIMUM LIABILITY SHALL NOT EXCEED THE
ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
This warranty is applicable only in the European Union, Australia, and New Zealand. Outside these areas, please contact your
authorised Ryobi dealer to determine if another warranty applies.
LIMITED WARRANTY (Original Instructions)
TECHTRONIC INDUSTRIES EMEA
Medina House, Field House Lane,
Marlow, Bucks
SL7 1TB - United Kingdom
RYOBI TECHNOLOGIES (UK) LIMITED
Medina House, Field House Lane,
Marlow, Bucks
SL7 1TB - United Kingdom
Tel: + 44 (0) 1628 894400
Fax: + 44 (0) 1628 894401
Technical Helpline : + 44 (0) 800 389 0305
TECHTRONIC INDUSTRIES FRANCE SAS
Immeuble Le Grand Roissy
Z.A. du Gué - 35 rue de Guivry
77990 Le Mesnil Amelot France
Phone: + 33(0)1 60 94 69 70
Fax: + 33(0)1 60 94 69 79
RYOBI BELGIUM
Avenue des Pâquerettes, 55
Zoning artisanal - bâtiment 5
B - 1410 Waterloo
Belgique
Tel : + 32(0) 2357 8140
Fax : + 32(0) 2357 8149
TTI ITALIA SRL
Via Fratelli Gracchi, 39
20092 Cinisello Balsamo (MI)
Italia
Tel : + 39 02 37050440
Fax : + 39 02 37050444
TECHTONIC INDUSTRIES IBERIA S.L
Av. De la Industria, 52
Coslada – Madrid – España
Tel: 91 485 12 10
TECHTRONIC INDUSTRIES SOUTH AFRICA
CO. (PTY) LTD
P.O Box 83888, South Hills,
Johannesburg, 2136
South Africa
TECHTRONIC INDUSTRIES (ASIA) CO., LTD.
24/F, CDW Building,
388 Castle Peak Road,
Tsuen Wan, Hong Kong
Tel : + 852 2402 6888
TECHTRONIC INDUSTRIES CENTRAL EUROPE GMBH
Itterpark 2
D-40724 Hilden
Deutschland
Tel: + 49 (0)960-0
Fax: + 49 (0) 960-238
TECHTRONIC INDUSTRIES
AUSTRALIA PTY LIMITED
Building B, Rosehill Industrial Estate,
3 Shirley Street,
Rosehill NSW 2142
Australia
Tel: (02) 8892 1800 or 1300 361 505
Fax: 1800 807 993
TECHTRONIC INDUSTRIES (NZ) LIMITED
27 Clemow Drive, Mt Wellington
PO Box 12-806, Penrose, Auckland
New Zealand
Tel: + 64 (0) 9 573 0230
Free Call: +64 0800 279 624
Fax: + 64 (0) 9 573 0231
A&M MIDDLE EAST FZCO
P.O.Box 61254
Jedel Ali, Dubai
United Arab Emirates
Tel.: + 9714 8861399
Fax: + 9714 8861400
TECHTRONIC INDUSTRIES DENMARK APS
Stamholmen 147, 4
DK-2650 Hvidovre
Denmark
Tlf 43 56 55 55
Fax 43 56 55 56
E-mail: kundeservice@tti-emea.com
TECHTRONIC INDUSTRIES NORWAY AS
Stamholmen 147, 4
DK-2650 Hvidovre
Denmark
Tlf.: (+47) 800 12 493
Faks: (+47) 800 12 492
E-mail: kundetjeneste@tti-emea.com
TECHTRONIC INDUSTRIES SWEDEN AB
Stamholmen 147, 4
DK-2650 Hvidovre
Denmark
Tel (+46) 08 24 60 30
Fax (+46) 08 24 60 31
E-mail: kundtjanst@tti-emea.com
TECHTRONIC INDUSTRIES FINLAND OY
Stamholmen 147, 4
DK-2650 Hvidovre
Denmark
Tel. 0800 1 09000
Fax 0800 1 09001
E-mail: asiakaspalvelu@tti-emea.com
Machine: CORDLESS GRASS SHEAR / SHRUBBER
Name of company: Homelite Far East Co., Ltd.
Address: 24/F, CDW Building,
388 Castle Peak Road,
Tsuen Wan Hong Kong.
Type: CGS1820LBC
Name / title: Andrew John Eyre (BEng, CEng, MIET)
Vice President of Engineering
Signature:
8 / 2010
Loading...