Ryobi 5133002305 Instruction manual

R18SDS

ORIGINAL INSTRUCTIONS

18V SDS Rotary Hammer

Important!

It is essential that you read the instructions in this manual before assembling,
operating and maintaining the product.

Subject to technical modifications.

Safety

Safety, performance, and dependability have been given
top priority in the design of your rotary hammer.

INTENDED USE

This rotary hammer drill is intended to be used only by
adults who have read and understood the instructions and
warnings in this manual and can be considered responsible
for their actions. It is to be used by a single operator by
grasping both trigger and side handles.

The rotary hammer drill is designed to operate without
hammer function into wood and metal. For chiselling and
masonry drilling, the hammer mode may be used.

The rotary hammer drill is designed to operate with drill
bits up to the maximum diameter defined in the product
specification table.

Do not use the product in any way other than those stated
for intended use.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool’’ in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

WORK AREA SAFETY

Ŷ Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

Ŷ Do not operate power tools in explosive

atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Ŷ Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

Ŷ Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk
of electric shock.

Ŷ Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

Ŷ Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

Ŷ Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase

the risk of electric shock.

Ŷ When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric
shock.

Ŷ If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

Ŷ Stay alert, watch what you are doing and use

common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in
serious personal injury.

Ŷ Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.

Ŷ Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch
on invites accidents.

Ŷ Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal
injury.

Ŷ Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

Ŷ Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

Ŷ If devices are provided for the connection of dust

extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

Ŷ Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was
designed.

Ŷ Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

Ŷ Disconnect the plug from the power source and/or

1

Safety

the battery pack from the power tool before making
any adjustments, changing accessories or storing
power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

Ŷ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained
users.

Ŷ Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by

poorly maintained power tools.

Ŷ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.

Ŷ Use the power tool, accessories and tool bits etc,

in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations

different from those intended could result in a
hazardous situation.

BATTERY TOOL USE AND CARE

Ŷ Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with
another battery pack.

Ŷ Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

Ŷ When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.

Shorting the battery terminals together may cause
burns or a fire.

Ŷ Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or
burns.

SERVICE

Ŷ Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is
maintained.

Ŷ Hold power tool by insulated gripping surfaces

when performing an operation where the cutting
accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.

Ŷ Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.

Ŷ Wear safety goggles to protect your eyes from flying

particles and splinters.

ADDITIONAL SAFETY WARNINGS

Ŷ Always ensure you hold the product securely. Twisting

of the product if it becomes jammed may result in injury
or loss of control of the product.

Ŷ Do not operate the forward /reverse or mode selector

switches when the product is running. Wait for it to
completely stop before changing direction or mode.

Ŷ Drill bits or chisels will become hot during use. They

may also be sharp. Wear suitable gloves and take care
when changing or adjusting these acceseries to avoid
personal injury.

Ŷ When working in walls, floors or ceilings, take care to

avoid cables, gas and water pipes.

Ŷ Clamp your workpiece with a clamping device to prevent

unexpected movement. Unclamped workpieces can
cause severe injury and damage.

Ŷ The dust produced when using the product may be

harmful to your health, inflammable or explosive. Do not
inhale the dust. Use a dust extraction system and wear
a suitable dust protection mask. Remove deposited
dust thoroughly, e.g., with a brush and vacuum cleaner.

If the drill bit or chisel becomes jammed in the workpiece
during use:

Ŷ Immediately release the trigger.

Ŷ Remove the battery pack from the product.

Ŷ Release the bit or chisel from the SDS adaptor. Do not

try to extract the jammed bit with the product attached
to it.

Ŷ Extract the jammed bit or chisel by other means.

Example: large pliers or wrench. Note: If you are
uncertain about how to extract a jammed bit or chisel,
seek professional advice from a reputable builder or
similar tradesman.

HAMMER SAFETY WARNINGS

Ŷ Wear ear protectors. Exposure to noise can cause

hearing loss.

Ŷ Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2

Safety

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national
provisions and regulations.

Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.

KNOW YOUR PRODUCT

See page 5.

1. LED light

2. Mode selector

3. Forward / reverse button

4. Switch trigger

5. Battery port

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.

Ŷ Injury to hearing – Wear suitable ear protection and

limit exposure.

Ŷ Injury to sight – Wear protective eye shields or

goggles when using the product.

Ŷ Injury caused by vibration – Limit exposure and

follow the instructions on risk reduction in this
manual.

Ŷ Electric shock after contact with hidden wires – Hold

the product only by insulated surfaces.

Ŷ Respiratory injury – Dust created by operating the

product, wear suitable protection dependent on
type of dust.

RISK REDUCTION

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:

Ŷ Keep your body warm in cold weather. When operating

the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.

Ŷ After each period of operation, exercise to increase

blood circulation.

Ŷ Take frequent work breaks. Limit the amount of

exposure per day.

If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.

WARNING

Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

MAINTENANCE

WARNING

The product should never be connected to a power supply
when you are assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
accidental starting that could cause serious injury.

WARNING

When servicing use only identical RYOBI replacement
parts. Use of any other parts may create a hazard or
cause product damage.

Ŷ Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.

Ŷ Do not use compressed air to blow dust / dirt from any

power tool. Serious eye injury could result. Use a cloth,
brush or vacuum to remove dust and dirt.

3