Ryobi 4710300 User Manual
OPERATOR'S MANUAL
Miter Clamping Kit
4710300
(For use with BT3000 & BT3100 Table Saws)
Your new miter clamping kit has been engineered and manufactured to Ryobi's high standard for dependability,
ease of operation, and operator safety . Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual.
Thank you for buying a Ryobi accessory kit.
SAVE THIS MANUAL FOR FUTURE REFERENCE
RULES FOR SAFE OPERATION
Safe operation of this accessory requires that you read
and understand this operator's manual, the operator’s
manual for the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
■ KNOW YOUR ACCESSORY. Read the operator's
manual carefully. Learn the product's applications
and limitations as well as the specific potential hazards related to this product.
■ KEEP THE WORK AREA CLEAN. Cluttered work
areas and work benches invite accidents. DO NOT
leave tools or pieces of wood on the saw while
operating.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.
SYMBOL MEANING
■ ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-
resistant lenses; they are NOT safety glasses.
■ DO NOT USE THIS PRODUCT WITH OTHER
EQUIPMENT or for other purposes.
■ ALWAYS DISCONNECT THE SAW FROM THE
POWER SUPPLY BEFORE ASSEMBLING THIS
KIT. Make sure the switch is off when reconnecting
the saw to a power supply.
■ BEFORE MAKING A CUT, BE SURE ALL ADJUSTMENTS ARE SECURE.
■ SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct other users. If you
loan someone this product, also loan these instructions.
SAFETY ALERT SYMBOL: Indicates danger, warning or caution. May be used in conjunction
with other symbols or pictographs.
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
NO HANDS: Failure to keep your hands away from the blade will result in serious personal injury.
WET CONDITIONS ALERT: Do not expose to rain or use in damp locations.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
2
UNPACKING
INFORMATION
Your miter clamping kit includes a miter clamp and the
connecting hardware necessary to assemble and attach
the miter clamp to the miter fence of your saw.
NOTE: This kit applies downward and inward pressure
to the workpiece. The kit snugly pulls the workpiece
against the miter fence up to a maximum of 1/16 in.
■ Remove the loose parts from the box. Make sure
that all items listed in the loose parts list are included.
■ Inspect all parts carefully to make sure no breakage
or damage occurred during shipping.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
MITER CLAMP
POST
WARNING:
If any parts are missing do not assemble the kit until
the missing parts are replaced. Failure to do so
could result in serious personal injury.
LOOSE PARTS LIST
1. Post
2. Miter Clamp
3. Knob Bolt #5/16-18 x 1 in.
4. Spacer
5. T-Nut 5/16 in.
KNOB BOLT
SPACER
TOOLS NEEDED
You need an adjustable wrench to assemble this accessory.
5/16 in. T-NUT
Fig. 1
3
Loading...