Page 1
OPERATOR'S MANUAL
Dustbag
4070300
(For use with BT3000 & BT3100 Table Saws)
Your new dustbag has been engineered and manufactured to Ryobi's high standard for dependability, ease of
operation and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual.
Thank you for buying a Ryobi accessory kit.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Page 2
RULES FOR SAFE OPERATION
Safe operation of this accessory requires that you read
and understand this operator's manual, the operator’s
manual for the table saw and all labels affixed to the
accessory and/or tool.
READ ALL INSTRUCTIONS
■ KNOW YOUR ACCESSORY. Read the operator's
manual carefully. Learn the product's applications
and limitations as well as the specific potential hazards
related to this product.
■ KEEP THE WORK AREA CLEAN. Cluttered work
areas and work benches invite accidents. DO NOT
leave tools or pieces of wood on the saw while
operating.
UNPACKING
INFORMATION
■ Remove the loose parts from the box. Make sure
that all items listed in the loose parts list are included.
■ Inspect all parts carefully to make sure no breakage
or damage occurred during shipping.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
■ ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-
resistant lenses; they are NOT safety glasses.
■ DO NOT USE THIS PRODUCT WITH OTHER
EQUIPMENT or for other purposes.
■ ALWAYS DISCONNECT THE SAW FROM THE
POWER SUPPLY BEFORE ASSEMBLING THIS
KIT. Make sure switch is off when reconnecting the
saw to a power supply.
■ SAVE THESE INSTRUCTIONS. Refer to them
frequently and use them to instruct other users. If you
loan someone this product, also loan these
instructions.
LOOSE PARTS LIST
1. Elbow
2. Dust Bag
WARNING:
If any parts are missing, replace the missing parts
before assembling the kit. Failure to do so could
result in serious personal injury.
ELBOW
DUST BAG
DUST BAG ADAPTER
2
Page 3
ASSEMBLY
WARNING:
The table saw should never be connected to a power
supply while you are assembling parts. Disconnecting the table saw will prevent accidental starting that
could cause serious personal injury.
FITTING THE ELBOW TO THE DUST
COLLECTION CHUTE
For BT3000 and BT3100
See Figure 1.
The elbow fits inside the dust collection chute on the
table saw.
■ Slide the elbow into the chute.
CONNECTING THE DUST BAG TO THE
ELBOW
For BT3000 and BT3100
See Figure 2.
The dust bag adapter fits inside the elbow.
■ Slide the dust bag adapter into the elbow as shown.
For efficient operation, empty the dust bag before it is
half full. Doing so will permit better air flow through the
bag.
WARNING:
Fig. 1
Collected dust from sawing surface coatings such as
polyurethanes, linseed oil, etc. can self-ignite in your
dust bag or elsewhere and cause fire. To reduce the
risk of fire, always empty your dust bag frequently
(10-15 minutes) while sawing and never store or
leave a saw without totally emptying its dust bag.
Also follow the recommendations of the coatings
manufacturers.
Fig. 2
3
Page 4
OPERATOR'S MANUAL
Dustbag
4070300
WARRANTY
Ryobi warrants its accessories for a period of 90 days from the date of purchase. Batteries and chargers are
warranted for a period of two years from the date of purchase.
PARTS AND SERVICE
For parts or service, contact your nearest Ryobi authorized service center. Be sure to provide all relevant
information when you call or visit. For the location of the authorized service center nearest you, please call
1-800-525-2579 or visit us online at www.ryobitools.com. When ordering parts, always give the model
number:
4070300
983000-153
RYOBI TECHNOLOGIES INC.
1428 Pearman Dairy Road Anderson, SC 29625
Post Office Box 1207 Anderson, SC 29622
1-800-525-2579 www.ryobitools.com
Loading...