RVS Systems RVS-082563 User Manual

Camera

White RCA cable (plug)

. Monitor accepts 2 video inputs

-12V Power (in)

Video (in)

power to either input. (white and Yellow cables ) to alternate between inputs cut

is also a "VIDEO IN" cable

camera to the display in your vehicle. DC12V power system. Connect the video output (yellow) of the Connect power cord 12+ (red) and 12V- (black) to your vehicles Mount the camera adjust the lens of the camera to its position.

switch/fuse line and the black wire to ground. line 12V+ to reverse gear which can be an accessory side and Monitors Side and than attach Monitors Red power black wire to Ground. Connect 15' RCA video cable Cameras red power line 12V+ to the vehicles reverse tail lights and the when vehicle goes in reverse. Simply connect the Camera's To automatically have the camera and Monitor turn ON only

the black power line to ground. ignition power which can be an accessory switch/fuse line & vehicle activates, Simply connect the red power line 12V+ to To automatically have the camera & monitor turn ON when

equipment

by law. required to be installed

motor vehicle mirror or for any other substitute for rear-view intended for use as a Camera System is not your vehicle. The Backup view mirror that exist in aid to your standard rearinstalled as a supplement System is intended to be The Backup Camera

and operate the unit. be able to properly install With this manual you will

or in any

on your

while operating the vehicle. or indirectly, to the driver location that is visible, directly

of the driver's seat located forward of the back TV, TV monitor or screen equipped with a drive a motor vehicle unlawful for a person to In most jurisdictions, it is vehicle. driver while operating the directly or indirectly, to the location that is visible, driver's seat or in any forward of the back of the TV viewer or screen located equipped with a drive a motor vehicle unlawful for a person to In some jurisdictions, it is

Installation Location

many years of trouble-free. designed to provide you with Your Backup Camera System is Backup Camera System. purchase of a Rear View

Congratulations

installation Please read this manual before proceeding

Installation

Warranty

One YearWarranty

Rear View Safety Inc. warrants this product against material defects for a period of one year from date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. Rear View Safety Inc. is not responsible for a defect in the system as a result of misuse, improper installation, damage or mishandling of the electronic components. Rear View Safety Inc. is not responsible for consequential damages of any kind.

This warranty is void if: defects in materials or workmanship or damages result from repairs or alterations which have been made or attempted by others or the unauthorized use of nonconforming parts; the damage isduetonormal ware and tear, this damage is due to abuse, improper maintenance, neglect or accident: or the damage is do to use oftheRearView Safety Inc. system after partial failure or use with improper accessories.

Warranty Performance

DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW SAFETY PRODUCT EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP, SUCH DEFECT WILL BE REPAIRED WHEN THE COMPLETE REAR VIEW SAFETY INC PRODUCT IS RETURNED, POSTAGE PREPAIDAND INSURED, TO REAR VIEW SAFETY INC. OTHER THAN THE POSTAGE AND INSURANCE REQUIREMENT, NO CHARGE WILLBE MADE FOR REPAIRSCOVEREDBYTHIS WARRANTY.

Warranty Disclaimers

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE ABOVE WARRANTY IS MADE WITHREGARDTO THIS REAR VIEW SAFETY INC. MERCHANTABILITY OR FITNESS FORAPARTICULAR USE OR PURPOSE AND ALL OTHER WARRANTIES. IN NO EVENT SHALL . LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYSALLEGED TO BEAS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.

DISCLAIMS ANY IMPLIED WARRANTY OR

REAR VIEWSAFETYINC.

REAR VIEW SAFETY INC

IMPORTANT NOTICE

Product Manual InstalIation Instructions

Rear View Camera System

RVS-770617N

Product Info

Sensor

TV System

Effective Pixel

Electronic Shutter

Scanning System

Sync System

Resolution

Lens Angle

Sensor Area

Video Output

S/N Ratio

Water proof

Minimum Illumination

Current Consumption

Power Supply

Operation Temperature

Storage Temperature Other Items

Monitor Dimensions

Camera Dimensions

CMD

PAL

628X586 pixels

1/50-1/100,000 sec

2:1 Interlace

Internal

420 TV Lines

2.8mm/120 - 1.8mm/710

5.961mm X 4.276mm

1.0Vp-p 75 Ohm

More than 48db

Ip67

0.2Lux/F1.5(0 Lux With LED)

No More 300mA

DC 12V+10%

-20 C~60 C (Rh95% MAX)

-30 C~60 C (Rh95% MAX)

Automatic white balance, Agc and BLC

3.3/4"(W) x 3"(H) x 3/4" (D)

1" Diameter

656X462 pixels

1/60-1/100,000 sec

NTSC

Product Includes:

3.5 LCD color monitor 120 angle CMD camera with night vision 15' RCA extension cable for camera Power Cables Drill Bit

This system is complete with a color 3.5" LCD monitor 120° CMD camera with night vision and all the wires, connectors and mounts

you will need. The system is weather proof, strong and reliable, shock

resistant and comes with a full year warranty.

Rear View Safety Inc. reserve the right to change or modify product specifications

or measurements without notice

WARNING

nnThe monitor should be situated

away from direct sun light, heat, water or moisture.

This product is made with precise electronic components that should be handled with care.

n Make sure the monitor stand is

firmly fixed to secure location.

n Please take special care to the

wire positioning while installing the rear view system in order to avoid wiring damage.

Information

IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.

SAFETY PRECAUTIONS

nnThe rear view system is intented to be

used when the vehicle is in reverse. Please do not watch movies or operate the monitor while driving. It may result in accident because of distraction.

Do not install the monitor where it may obstruct drivers view or obstruct an air bag device.

Do not attempt to service this product

on your own. If the system has any problem, please disconnect power to the unit and contact customer service.

Dropping the unit may cause possible

mechanical failure.

If you have any questions about this product contact

Troubleshooting

Monitor will not power up / no backlight on power button

•

Check fuse Check 12v+ to monitor.•

•

Check ground connection.

No image on screen

•

Verifycamerais on correct camerainput.

•

Verifycableis connected to monitor.

•

Verifycamerais connected to cable.

•

Connect known good cameraandcableto monitor.