APP CONTROLLED BLUETOOTH
WEATHERPROOF RGB SPEAKER LIGHT
MADE IN CHINA
WHAT’S IN THE BOX
1 x Bluetooth RGB Speaker/Light
6 x Mounting Screws
4 x Screw Covers
2 x Mounting Brackets
1 x 12V Power input Plug
1 x Manual/Warranty
Foam sealing tape
Congratulations on your purchase of this Premium RV Media Bluetooth Speaker
with integrated Awning Light.
Designed with RV Enthusiasts in mind, this speaker allows you to easily add an
external speaker to your RV using the latest Bluetooth Streaming technology.
Not only suitable for RV’s, there are many other uses for this speaker such as:
Marine, Pergolas, Pool Areas, Garages etc - anywhere you can mount the speaker
within reach of a 12V or 240V (using a plug pack) power supply and where you
would like the added convenience of a super bright app controlled LED light!
SPECIFICATIONS
POWER
Operating Voltage: 12V
100W Max Audio Output Power
LED Power Consumption: 0.75A @ 12V Max
Max Total Power Consumption 3A @ 12V
BLUETOOTH
Output Power Class 2
Frequency Band 2.4000GHz – 2.4835GHz
Typical Range up to 10 Metres (no obstructions)
Bluetooth 4.0 specification
The Bluetooth word mark and logos are owned by the Bluetooth SIG, inc and any use of such
marks by RV Media is under license. Other trademarks and trade names are those of their
respective owners.
P/N: 043269 Black, P/N: 043268 White
Page 3
QUICK START GUIDE
1. Power Up
Turn the speaker on - using the awning light switch if the light has been connected to
the awning light circuit, otherwise a separate switch or 240V plug pack if fitted.
2. Connect your device.
Open the Bluetooth menu on your device to search for your RV Media Bluetooth
speaker. It’s Bluetooth device name is “RV Media RGB”.
Upon first use, the speaker will not appear on your Bluetooth device list for
approximately 8 seconds. Once the it appears, select “RV Media RGB” to connect.
No pin number or password is required.
2. Listen to Music!
You can stream music to the speaker without using the dedicated app. Use the
volume control on your device to control the volume of the speaker.
3. Get the App
The RV Media free app is available both on the Apple app store
and Google Play. Search “RV Media” to download the app for
your device.
4. Using the app
To use the app, please follow these steps:
a) Turn on the RV Media BT speaker/light
b) Connect your device as per step 2.
c) Open the app. The app will search for the speaker then open
the light on/off, colour selection menu.
d) Use the app to control the light functions.
5. Bluetooth Connection & App trouble shooting.
After first connection of your device to the speaker, the speaker should automatically
re-connect the next time it is powered up (providing Bluetooth is enabled on your
device). If you re-open the app but it fails to re-connect to the speaker, please close
the app then re-open it. Please use the following procedures to close the app:
Apple - double click on the home button to open a list of apps running in the
background then locate the RV Media app and swipe upwards to close the app.
Android - Launch the Recent Applications Menu (this varies from device to device so
check your user documentation if you are unsure how to find this menu). Locate the
RV Media app and swipe to the right to close it.
6. Reconnecting devices.
When you power up the RV Media speaker/light, it will first attempt to reconnect to a
device that was previously connected (this applies to the last 5 devices connected to
the speaker).
.
Page 2
Apple app store QR link
RV INSTALLATION
1. LOCATION
The RV Media Bluetooth Speaker Light is intended to be installed on the exterior of
your RV. It operates on 12V DC and the best location to fit it is in place of an existing
awning light, however you can install it anywhere outside or inside the RV as long as
you can connect it to 12V.
2. WIRING
The Bluetooth Speaker Light is supplied with a power lead fitted with male
& female line plugs. These allow the speaker to be pre-wired and easily
connected by joining the two plugs together. The power plug also allows
for the connection of the optional 240V plugpack plus allows the speaker
to be temporarily mounted if required.
Connection. Simply connect the red wire of the removable end of the
power lead to the RV’s +12V wire & the black wire to -12V. Ensure these
connections are made with suitable crimp terminals or solder & heatshrink.
3. MOUNTING
If installing in place of an exterior awning light, please use the following steps as a
guide:
a. Remove the existing awning light.
b. Mark the location of the 4 mounting screws. Note be careful to ensure the screws
will not damage any materials behind the mounting surface.
c. Mount the optional locating brackets using the centre screw (only) with the hook
part at the bottom. These brackets provide reinforcement for the speaker plus can
be used as a temporary, removable mounting option if required.
d. Connect the power plug to the socket that was wired in step 2. We suggest that
this connection is secured with electrical tape. Mount the speaker using the 4
supplied screws - taking care not to over tighten the screws. Please ensure the
power wire is recessed as much as possible in the hole where it emerges
from; and ensure that any remaining cable is stored in the cavity at the back of
the speaker. Press in the supplied screw covers to hide the screws.
e. Using a suitable RV Sealant, seal around the edge of the speaker ensuring a
water-tight seal to complete the installation or use the supplied sealing foam.
If you are unsure about any elements of these installation guidelines, please
seek the advice of an experienced RV installer or suitable Electrician.
INSTALLATION IN OTHER LOCATIONS
For installations in such as Marine, home Pergolas, Pool Areas and Entertainment
areas; please use the optional RV Media 12V Plug pack (p/n 040855) if a direct 12V
power source is not available. The plug pack features an extra long 3M power cord
to ensure it reaches the Bluetooth Speaker.
Note the plugpack should be located in a dry environment.
Removable end.
Google Play QR app link
APP FUNCTIONS - MAIN CONTROL SCREEN (Fig 1)
Light Control
To turn the integrated light on or off, tap on the light bulb symbol (Fig 1a).
To Dim or Brighten the light, touch and move the Dimmer icon (Fig 1b). Move it anticlockwise to dim the light or clockwise to make the light brighter. To change the light’s
colour, select your desired colour within the color wheel (Fig 1
Equaliser
The RV Media app also features an integrated audio Equaliser. To use this function,
tap on the Equaliser Icon (Fig 1c) and then select your desired sound mode for a
selection of: Pop, Rock, Classical, Disco, Jazz & Theatre.
To return Main Control Screen, touch the return arrow (Fig 2a)
Additional Functions (Color Scan, Insect Light, Sleep Timer)
From the Main Control Screen, touch the Additional Function Icon (Fig 1d) to access
the Additional Function screen (Fig 3) for the following functions:
Colour Scan
This mode constantly changes the light colour through the color spectrum. Slide the
speed control (Fig 4a) to vary the scan speed to suit your mood! Great for parties,
demonstrations or relaxing
Insect Light
Turn on the Insect Light mode help keep insects away from your RV. The amber
colored insect light is a carefully selected light color specifically for this function.
Sleep Timer
The sleep timer allows you completely power off the Speaker/Light after a predetermined period of time that you select. This function is great security function as
well as being useful if someone is returning to the RV at a later time for example.
When you tap the sleep timer function icon (Fig 5a), you can then select a sleep time
varying from 0 minutes (which turns off the speaker immediately) to 60 minutes.
Scroll to your desired time then tap “Confirm” to start the timer.
NOTE As this function completely powers off the speaker, you will not be able to turn
it back on via the app. To power the speaker up again, you will need to turn it off and
on at its main power switch (eg the awning light switch on the vehicle)
Page 4
Page 5
OPERATION
Powering the unit up.
To ensure easy operation, where the Bluetooth Speaker Light is fitted in place of an
awning light, use your RV awning light power switch to turn the Bluetooth Speaker
Light’s master power on or off. Where the Speaker Light
is fitted in other locations using an optional 240V plug
pack, please use this power supply to operate the unit.
The unit is fitted with an on/off switch on the right-hand
side (circled opposite) allowing you to turn the LED
light on or off as required.
BLUETOOTH CONNECTION
The RV Media App Controlled Bluetooth Speaker Light connects to devices such as
Smart Phones and Tablets using Bluetooth A2DP Audio Streaming technology.
1. When powered up, the speaker will attempt to connect to a device that has been
paired to it previously. The red LED at the bottom will begin to flash while the blue
LED is illuminated constantly. Depending on how many devices have been paired
previously, the speaker will remain in this mode for around 8-30 seconds. During this
time, the Speaker will not be visible to devices that have not connected to it before.
2. After this period if a device connected previously is not present, or you are
connecting for the first time, the red and blue LEDS will flash alternately and “RV
Media RGB” will become visible on your Bluetooth Device list. At this time you can
select “RV Media RGB” to connect to the Bluetooth Speaker.
(To connect to the speaker, open the Bluetooth menu on your device and search for
new devices. Select “RV Media RGB” to initiate connection).
Note you do not need to enter a PIN code to connect a device to this speaker.
3. When connected, both red & blue LED’s will illuminate constantly to confirm that a
device is connected to the speaker.
4. Only one device can be connected at a time but a maximum of 5 devices, once
paired, can be stored in memory. This means that a device previously paired will
automatically pair once the speaker is turned on providing the device is within range.
If, for example, a 6th device is paired with the speaker, the oldest device will be
erased and will need to be manually re-connected if used again.
5. Once connected to your device, you can then use you device’s Audio Controls to
start the music playback and control the speaker’s volume level.
6. Audio may also be streamed from many Smartphone apps such as Internet Radio
Stations, Youtube, Video Players etc. This feature is dependent on app and device
capabilities, software and operation system version.
APP FUNCTIONS
Once you have paired the speaker to your device, you can now open the app (please
see the quick start guide on P2 for details on installing the RV Media app).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
a
a
a
b
a
c
d
e
TROUBLESHOOTING
Most connection problems can be fixed by manually disconnecting and reconnecting
your Bluetooth device to the RV RGB Media Bluetooth Speaker Light.
Connection Security
While this device does not need a PIN code to allow devices to connect to it, your
connection is secure and cannot be disturbed by someone nearby with a Bluetooth
device.
Once you have turned on the Bluetooth Speaker and connected your Bluetooth
device, the speaker ceases being in “discovery” mode and will not be visible to other
Bluetooth devices ensuring your Bluetooth connection with the speaker is secure.
If while using the speaker, you want to connect a different device to it, it is suggested
you use the following procedure:
a) Turn off the speaker.
b) Turn off Bluetooth on the device that had been connected to the speaker.
c) Turn on the speaker and connect the new device to it.
Note. The reason you need to turn off Bluetooth on the original device is that the
speaker may connect to it first (when turned back on) rather than the new device.
Once the new device is connected, you can turn on Bluetooth again on the original
device.
This system ensures you have a secure connection between your device(s) and the
speaker that cannot be interrupted by other nearby Bluetooth devices.
CLEANING
While the RV Media Bluetooth Speaker Light is fully waterproof, it is recommended
that when cleaning your RV with a pressure washer or high pressure hose that it be
covered with a plastic bag or similar and taped to the edge of the speaker.
NOTES
______________________________________________________________
_____________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
Page 6
Page 7
1300 654 936 (Aus) 09 225 1910 (NZ)
Camec Pty Ltd Camec NZ
47-63 Remington Drive, Dandenong South, VIC, 3175, AUS 44 Montgomerie Road, Mangere, Auckland, NZ
1300 654 936 (Aus); email: service@camec.com.au
09 225 1910 (NZ); email service@camec.co.nz
Page 6
Page 7
Loading...