Page 1
PRODUCT DATA
EpoxyShield® Cleaner/Degreaser - 2901
DESCRIPTION
RUST-OLEUM® 2901 - EPOXYSHIELD® Cleaner/Degreaser for floors is a concentrated,
alkaline, non-flammable, virtually odour-free cleaning/degreasing solution.
RECOMMENDED USES
RUST-OLEUM® 2901 - EPOXYSHIELD® Cleaner/Degreaser for floors should be used to
remove grease, oil, proteins dirt and many other surface contaminants from coated, mineral
and steel substrates.
RUST-OLEUM® 2901 - EPOXYSHIELD® Cleaner/Degreaser for floors should be applied
with an artificial sponge, cloth or stiff nylon brush or broom.
RUST-OLEUM® 2901 - EPOXYSHIELD® Cleaner/Degreaser for floors can also be used as
an additive for high-pressure (steam) cleaning.
TECHNICAL DATA
VOC-content: 9 g/l
Coverage
Theoretical: 6 - 8 m²/l
Practical: Practical usage depends on many factors such as type and amount of
contaminants, shape of the substrate and material losses during application.
DIRECTION FOR USE
To ensure homogeneity shake well before use.
Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much
as possible.
RUST-OLEUM® 2901 - EPOXYSHIELD® Cleaner/Degreaser for floors can be applied with a
sponge, cloth, brush, and broom or cleaning machine.
When used in combination with a cleaning machine dilute with 50% cold water.
After use rinse with plenty of fresh water.
After cleaning, remove any remaining water and allow the surface to dry, as moist ure left on
the surface or entrapped into pores may cause premature failure of the coating system.
Large surface areas or poor drying conditions may require longer drying times before a
coating system can be applied.
APPLICATION CONDITIONS
Temperature of air, substrate and material between 5 and 35°C.
REMARKS
If used on galvanized steel, zinc, aluminium or anodized aluminium rinse the surface.
SAFETY
Consult Safety Data Sheet and Safety Information printed on the can.
SHELLIFE / STORAGE CONDITIONS
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in
direct sunlight at temperatures between 5° and 35°C.
Page: 1 / 1 - Ver. 01
PDS 2901-gb
Issued: 14-10-08
The information contained herein is given in good faith. However, since application conditions are beyond our control,
Rust-Oleum Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the use of these
products. The company reserves the right to modify data without prior notice.
Loading...