Product Name:ICWB LSPR 12PK WHITE MARKINGRevision Date:8/26/2014
Product Identifier:203039Supercedes Date:New SDS
Product Use/Class:Marking Paint
Page 1 / 7
Supplier:
Preparer:Regulatory Department
Emergency Telephone:
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, IL 60061
USA
24 Hour Hotline: 847-367-7700
Manufacturer:
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, IL 60061
USA
2. Hazard Identification
EMERGENCY OVERVIEW: Extremely flammable liquid and vapor. Vapors may cause flash fire or explosion. Harmful if inhaled.
May affect the brain or nervous system causing dizziness, headache or nausea. Contents Under Pressure. May cause eye, skin, or
respiratory tract irritation. KEEP OUT OF REACH OF CHILDREN. Harmful if inhaled. Harmful if swallowed. Causes eye irritation.
Use ventilation necessary to keep exposures below recommended exposure limits, if any. Vapor Harmful. Causes Eye, Skin, Nose,
and Throat Irritation.
Classification
Symbol(s) of Product
Signal Word
Danger
GHS HAZARD STATEMENTS
Flammable Aerosol, category 1H222Extremely flammable aerosol.
Flammable Liquid, category 1H224Extremely flammable liquid and vapour.
Acute Toxicity, Oral, category 5H303May be harmful if swallowed.
Acute Toxicity, Dermal, category 5H313May be harmful in contact with skin.
Skin Irritation, category 2H315Causes skin irritation.
Eye Irritation, category 2H319Causes serious eye irritation.
Acute Toxicity, Inhalation, category 4H332Harmful if inhaled.
STOT, single exposure, category 3, RTIH335May cause respiratory irritation.
STOT, single exposure, category 3, NEH336May cause drowsiness or dizziness.
Aspiration Hazard, category 2H305May be harmful if swallowed and enters airways.
Eye Irritation, category 2BH320Causes eye irritation.
Flammable Aerosol, category 1H280Contains gas under pressure; may explode if heated
GHS PRECAUTIONARY STATEMENTS
P211Do not spray on an open flame or other ignition source.
P220Keep/Store away from clothing/…/combustible materials.
Date Printed: 8/26/2014
68476-86-8
64742-89-8
1317-65-3
1330-20-7
13463-67-7
100-41-4
14807-96-6
P235Keep cool.
P251Pressurized container: Do not pierce or burn, even after use.
P375Fight fire remotely due to the risk of explosion.
P102Keep out of reach of children.
P103Read label before use.
P202Do not handle until all safety precautions have been read and understood.
P234Keep only in original container.
P260Do not breathe dust/fume/gas/mist/vapours/spray.
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P262Do not get in eyes, on skin, or on clothing.
P264Wash … thoroughly after handling.
P270Do not eat, drink or smoke when using this product.
P271Use only outdoors or in a well-ventilated area.
P273Avoid release to the environment.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P281Use personal protective equipment as required.
P285In case of inadequate ventilation wear respiratory protection.
P312Call a POISON CENTER or doctor/physician if you feel unwell.
P351Rinse cautiously with water for several minutes.
P374Fight fire with normal precautions from a reasonable distance.
P402Store in a dry place.
P210Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
P410+P412Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P240Ground/bond container and receiving equipment.
P241Use explosion-proof electrical/ventilating/lighting/…/ equipment.
P242Use only non-sparking tools.
P243Take precautionary measures against static discharge.
P303+P361+P353IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower.
P370+P378In case of fire: Use … for extinction.
P403+P235Store in a well-ventilated place. Keep cool.
P501Dispose of contents/container to …
P321Specific treatment (see … on this label).
P352Wash with plenty of soap and water.
P362Take off contaminated clothing and wash before reuse.
P332+P313If skin irritation occurs: Get medical advice/attention.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P337+P313If eye irritation persists: Get medical advice/attention.
P304+P340IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P405Store locked up.
P403+P233Store in a well-ventilated place. Keep container tightly closed.
P302+P350IF ON SKIN: Gently wash with plenty of soap and water.
The text for GHS Hazard Statements shown above (if any) is given in the "16. Other Information" section.
4. First-aid Measures
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical
attention. Do NOT allow rubbing of eyes or keeping eyes closed.
FIRST AID - SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to
obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID - INGESTION: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can enter the
lungs and cause severe lung damage. Get immediate medical attention. If swallowed, get medical attention.
5. Fire-fighting Measures
EXTINGUISHING MEDIA:
Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: FLASH POINT IS LESS THAN 20 °. F. - EXTREMELY FLAMMABLE LIQUID AND
VAPOR!Water spray may be ineffective. Closed containers may explode when exposed to extreme heat due to buildup of steam.
Closed containers may explode when exposed to extreme heat. Vapors may form explosive mixtures with air. Vapors can travel to a
source of ignition and flash back. Isolate from heat, electrical equipment, sparks and open flame. Perforation of the pressurized
container may cause bursting of the can. No unusual fire or explosion hazards noted. Keep containers tightly closed.
SPECIAL FIREFIGHTING PROCEDURES: Full protective equipment including self-contained breathing apparatus should be used.
Evacuate area and fight fire from a safe distance. Water may be used to cool closed containers to prevent pressure buildup and
possible autoignition or explosion. Use water spray to keep fire-exposed containers cool. Containers may explode when heated.
6. Accidental Release Measures
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Remove
all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Dispose of according to local, state
(provincial) and federal regulations. Do not incinerate closed containers. Ventilate area, isolate spilled material, and remove with
inert absorbent. Dispose of contaminated absorbent, container, and unused contents in accordance with local, state, and federal
regulations.
7. Handling and Storage
HANDLING: Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.
Use only with adequate ventilation. Follow all MSDS/label precautions even after container is emptied because it may retain product
residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
STORAGE: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Contents under
pressure. Do not store above 120 ° F. Store large quantities in buildings designed and protected for storage of NFPA Class I
flammable liquids. Product should be stored in tightly sealed containers and protected from heat, moisture, and foreign materials.
Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep away from heat, sparks, flame and sources
of ignition. Avoid excess heat.
ENGINEERING CONTROLS: Use explosion-proof ventilation equipment. Provide general dilution of local exhaust ventilation in
volume and pattern to keep TLV of hazardous ingredients below acceptable limits. Prevent build-up of vapors by opening all doors
and windows to achieve cross-ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control
airborne levels below recommended exposure limits.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be
followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying respirator with organic
vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed
exposure limits.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial hygienist for further guidance regarding types of
personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
CONDITIONS TO AVOID: Avoid temperatures above 120 ° F. Avoid contact with strong acid and strong bases. Avoid all possible
sources of ignition.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
HAZARDOUS DECOMPOSITION: By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits
acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
11. Toxicological information
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes Serious Eye Irritation
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin irritation. Allergic reactions are possible.
EFFECTS OF OVEREXPOSURE - INHALATION: High gas, vapor, mist or dust concentrations may be harmful if inhaled. High
vapor concentrations are irritating to the eyes, nose, throat and lungs. Harmful if inhaled. Avoid breathing fumes, spray, vapors, or
mist. Prolonged or excessive inhalation may cause respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - INGESTION: Harmful if swallowed.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: IARC lists Ethylbenzene as a possible human carcinogen (group 2B).
Overexposure to xylene in laboratory animals has been associated with liver abnormalities, kidney, lung, spleen, eye and blood
damage as well as reproductive disorders. Effects in humans, due to chronic overexposure, have included liver, cardiac
abnormalities and nervous system damage. Contains Titanium Dioxide. Titanium Dioxide is listed as a Group 2B-"Possibly
carcinogenic to humans" by IARC. No significant exposure to Titanium Dioxide is thought to occur during the use of products in which
Titanium Dioxide is bound to other materials, such as in paints during brush application or drying. Risk of overexposure depends on
duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of Titanium
Dioxide in the formula. (Ref: IARC Monograph, Vol. 93, 2010)May cause central nervous system disorder (e.g., narcosis involving a
loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or damage. Reports have associated repeated and
prolonged occupational overexposure to solvents with permanent brain and nervous system damage. High concentrations may lead
to central nervous system effects (drowsiness, dizziness, nausea, headaches, paralysis, and blurred vision) and/or damage.
This product has been reviewed according to the EPA ‘Hazard Categories’ promulgated under Sections 311 and 312 of the
Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to
meet the following categories:
Fire Hazard, Pressure Hazard, Acute Health Hazard, Chronic Health Hazard
Sara Section 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name
Xylene1330-20-7
Ethylbenzene100-41-4
CAS-No.
Toxic Substances Control Act:
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from
the United States:
Chemical Name
Acetaldehyde75-07-0
CAS-No.
Date Printed: 8/26/2014
Inventory Information
CountryValue
USA (TSCA)No Information
Canada (DSL)No Information
Mexico(INSQ)No Information
Europe (EINECS)No Information
Japan (ENCS)No Information
Philippines (PICCS)No Information
China (IECSC)No Information
Australia (AICS)No Information
Korea (KECI)No Information
New Zealand (NZIOC)No Information
No Information
CALIFORNIA PROPOSITION 65:
Warning: This products contains a substance known to the State of California to cause cancer.
Chemical Name
Titanium Dioxide
Ethylbenzene
CAS-No.
13463-67-7
100-41-4
CALIFORNIA PROPOSITION 65 REPRODUCTIVE TOXINS
Page 6 / 7
Warning: This product contains a substance known to the State of California to cause birth defects or other reproductive
harm.
No Proposition 65 Reproductive Toxins exist in this product.
International Regulations:
CANADIAN WHMIS:
This SDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings.
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
Date Printed: 8/26/2014
Page 7 / 7
Text for GHS Hazard Statements shown in Section 3 describing each ingredient:
H225Highly flammable liquid and vapour.
H226Flammable liquid and vapour.
H332Harmful if inhaled.
Icons for GHS Pictograms shown in Section 3 describing each ingredient:
GHS02
GHS07
Rust-Oleum Corporation believes, to the best of its knowledge, information and belief, the information contained herein to be
accurate and reliable as of the date of this safety data sheet. However, because the conditions of handling, use, and storage of
these materials are beyond our control, we assume no responsibility or liability for personal injury or property damage incurred by
the use of these materials. Rust-Oleum Corporation makes no warranty, expressed or implied, regarding the accuracy or
reliability of the data or results obtained from their use. All materials may present unknown hazards and should be used with
caution. The information and recommendations in this material safety data sheet are offered for the users’ consideration and
examination. It is the responsibility of the user to determine the final suitability of this information and to comply with all applicable
international, federal, state, and local laws and regulations.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.