g
PRODUCT DATA
1632 - X1 ELECTRICAL CLEANER
DESCRIPTION
1632 X1 eXcellent Electrical Cleaner is a fast evaporating solvent cleaner suitable for
cleaning electronics, electrical and other precession equipment.
MAIN PROP ERTIES
Leaves no residue - fast to evaporate - low odour - removes dirt, oil, wax etc. – K2 approved.
RECOMMENDED USES
Suitable for cleaning electronic and electrical components. Ideal for cleaning air tools, small
compressors, etc.
Will clean relays, switches, printed circuits etc. Safe on most clear and opaque plastics and
suitable for removing light dirt from brakes, clutches and carburettors.
TECHNICAL DATA
Appearance: Transparent
Colour: Transparent
SURFACE PREPARATION
Disconnect items to be cleaned from electricity before applying.
Clean and remove old lubricant from components prior to application.
DIRECTION FOR USE
Shake aerosol before use. Spray from 10 to 20 cm and allow evaporating or wipe clean. Do
not over apply. Ensure adequate ventilation during use. This product is acceptable as a
solvent for cleaning electronic instruments, provided that all odour associated with the product
have dissolute before food or packaging are exposed to the area. All food products and
packaging should be removed from the area or covered prior to use.
APPLICATION CONDITIONS
Apply at temperatures between 5° and 35°C.
SAFETY
Consult Safety Data Sheet and Safety Information printed on the can.
SHELLIFE / STORAGE CONDITIONS
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in
direct sunli
ht at temperatures betwe en 5° and 35°C.
Page: 1 / 1 - Ver. 00
PDS 1632-gb
Edition: 08-12-11
The information contained herein is given in good faith. However, since application conditions are beyond our control, Rust-Oleum
Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the use of these products. The
company reserves the right to modify data without prior notice.
Loading...