PRODUCT DATA
1618 - X1 PTFE SPRAY
DESCRIPTION
1618 X1 eXcellent PTFE spray is a high purity, light lubricant containing PTFE. Suitable for
applications requiring a clean, light, dry film. X1 eXcellent PTFE spray is reinforced with
BoroTecX™. It has outstanding lubrication and water repellent properties. X1 eXcellent PTFE
spray is H1 compliant, and approved for incidental food contact.
MAIN PROP ERTIES
Excellent penetration - high anti-wear characteristics - contains PTFE - water repellent - ultra
low friction coefficient - clear clean formula - contains BoroTecX™ - H1 compliant for
incidental food contact.
RECOMMENDED USES
Light duty chains, hinges slides and gears. Ideal for air tools and other small machinery.
Clean product so suitable for use in car interiors and air tools. Will lubricate garden and
horticultural equipment. Ideal for use on commercial sowing and knitwear machinery.
TECHNICAL DATA
Appearance: Transparent
Colour: Transparent
Operating temperature: - 40 °C to 120 °C
SURFACE PREPARATION
Ensure electrical equipment is isolated and check surfaces for compatibility prior to
application. Clean and remove old lubricant from components prior to application.
DIRECTION FOR USE
Shake aerosol before use. Spray a light film onto surf ace from 20 to 30 cm. Do not over apply.
APPLICATION CONDITIONS
Apply at temperatures between 5° and 35°C.
SAFETY
Consult Safety Data Sheet and Safety Information printed on the can.
SHELLIFE / STORAGE CONDITIONS
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in
direct sunlight at temperatures between 5° and 35°C.
Page: 1 / 1 - Ver. 00
PDS 1618-gb
Edition: 08-12-11
The information contained herein is given in good faith. However, since application conditions are beyond our control, Rust-Oleum
Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the use of these products. The
company reserves the right to modify data without prior notice.
Loading...