Rust Oleum 1611 Data Sheet

PRODUCT DATA
1611 - X1 CUTTING & TAPPING SPRAY
DESCRIPTION
1611 X1 eXcellent Cutting & Tapping Spray is a specially formulated cutting fluid which lubricates and cools the cutting tools and work piece for every form of metalworking such as cutting, drilling, sawing and tapping. X1 eXcellent Cutting & Tapping spray is reinforced with BoroTecX™. It provides eXcellent performance. BoroTecX™ withstands extreme loads and temperatures, will resist chemical attacks and has excellent thermal conductivity. An ultra thin film of X1 eXcellent Cutting & Tapping spray will give lasting lubrication and protection.
MAIN PROP ERTIES
Lubricates and protects the cutting tools - cools while cutting - prolongs tool life - reduced friction leads to better surface finish - increases process speeds - non silicon - contains extreme pressure additives which help prevent galling and pitting - no discoloration of metals - anti fling properties.
RECOMMENDED USES
Cutting, drilling, sawing and tapping all types of ferrous and non ferrous metals.
TECHNICAL DATA
Appearance: Transparent Colour: Transparent Operating temperature: -30 °C to 130°C.
SURFACE PREPARATION Ensure electrical equipment is isolated and check surfaces for compatibility prior to application. Clean and remove old lubricant from components prior to application.
DIRECTION FOR USE
Shake aerosol before use. Spray a light film onto surface from 20 to 30 cm. Do not over apply. APPLICATION CONDITIONS
Apply at temperatures between 5° and 35°C. SAFETY
Consult Safety Data Sheet and Safety Information printed on the can.
SHELLIFE / STORAGE CONDITIONS
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Page: 1 / 1 - Ver. 00 PDS 1611-gb Edition: 08-12-11
The information contained herein is given in good faith. However, since application conditions are beyond our control, Rust-Oleum Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the use of these products. The company reserves the right to modify data without prior notice.
Loading...