Russound CAS44 User Manual

Data Sheet

CAS44

Multiroom Audio Controller-Amplifier

The Russound CAS44 Multiroom Audio Controller­Amplifier distributes four stereo sources to four
zones. Two controllers can be linked together to
support a total of eight zones.

Each zone has its own built-in stereo amplifier that
provides 20 watts RMS per channel. The system
also provides independent control of bass, treble,
balance, loudness and volume from the keypad in
each zone.

For zone control, the CAS44 system offers a choice
of two keypads. Using the optional SA-ZX3 Keypad
Splitter allows multiple keypads in each zone.

For ease of installation and simplicity of use, the
CAS44 controller does not require any program­ming. All source commands reside in the included
CAS-RC programmable remote control.

The CAS44 system passes IR commands from the
remote control through the keypads to the sources.
Two common IR output ports allow connection of
infrared emitters or an IR connecting block for
device control.

To provide easy integration with paging systems,
home automation systems and other devices, the
CAS44 has a muting trigger input and system trig­ger output, as well as an RS-232 port with a docu­mented serial protocol. This port can also be used
to update the system firmware.

The CAS44 system keypads connect to the con­troller with CAT-5 or CAT-5e cable. The speakers
connect to the built-in amplifiers with standard
speaker cable.

Rack ears are included with the CAS44 controller
for 2U rack mounting.

Specifications System Keypads

Included Accessories

Optional Accessory

SA-ZX3 Keypad Splitter

CAS-RC System Remote Control

Rack-mount ears
Power cord

Audio sources: 4

Zones per controller: 4

Zones per system: 8 maximum

Keypad ports: RJ45, T568A standard

Interface port: DB9 for RS-232 serial data

Source input connectors: RCA left and right

Source input impedance: 50 kilohms

Source input level: 2.2 Vrms max

Amplifier channels: 8 (2 per zone)

Power output: 20 watts per channel RMS into 8 ohms

Frequency response: 20 Hz to 20 kHz +0/–2.5 dB

Distortion: <0.10% THD+N from 20 Hz to 20 kHz

Signal-to-noise ratio: >90 dB A-weighted, >88 dB unweighted

Speaker impedance: 8 ohms nominal, 6 ohms minimum

Speaker connectors: Removable 4-pole color-coded snap

connectors

Mute trigger input: 12 VDC

System trigger output: 12 VDC, 100 mA maximum

Trigger connectors:1⁄8-inch TS, tip positive

Power rating: 100–120 VAC 3 A or

220–240 VAC 1.25 A, 50–60 Hz

Fuse rating: F3.0A H 250V USA and Canada

TF1.25A H 250V Europe

Dimensions: 17” W x 3.9” H x 11.5” D

(43 x 9.9 x 29.2 cm)

Weight: 17 lb 6.5 oz (7.9 kg)

Available separately or with controller in system kit

KP4 System Keypad KPL Advanced

System Keypad

CAS-RC Remote Control

Since 1967, innovation, quality and reliability have been the core of the Russound product tradition. Today, Russound offers everything for
enjoying multiroom audio-video in your home. All distributed audio-video solutions are built to high standards and designed with the unique
consideration of making products that are a pleasure to live with and enjoy.

5 Forbes Road, Newmarket, New Hampshire 03857 USA 603.659.5170 www.russound.com

©2005 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice.
Russound is not responsible for typographical errors or omissions. 10/05

Source