Russound CAA66 1 User Manual
CAA66
Multisource Multiroom
Audio Controller/Amplifier
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
If you have any questions please call Russound Inc. at
1-800-638-8055 or 603-659-5170.
Safety Instructions:
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the appliance in the operating instructions should be adhered to.
4. Follow Instructions - All operating and user instructions should be followed.
5. Water and Moisture - The appliance should not be used near water; for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
6. Carts and Stands - The appliance should be
used only with a cart or stand that is recommended by the manufacturer. An appliance
and cart combination should be moved with
care. Quick stops, excessive force and
uneven surfaces may cause the appliance
and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
10.Power Sources - The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on
the appliance.
11.Grounding or Polarization - Precaution should be taken so that the
grounding or polarization means of an appliance is not defeated.
12.Power Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, receptacles,
and the point where they exit from the appliance.
13.Cleaning - The appliance should be cleaned only as recommended by
the manufacturer.
14.Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
15.Object and Liquid Entry - Care should be taken so that objects do not
fall and liquids are not spilled into the enclosure through the openings.
16.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D.The appliance does not appear to operate normally; or
E. The appliance has been dropped or the enclosure is damaged.
17.Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should
be referred to qualified service personnel.
Precautions:
1. Power – WARNING: BEFORE TURNING ON THE POWER FOR THE
FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
2. Do Not Touch The Unit With Wet Hands – Do not handle the unit or
power cord when your hands are wet or damp. If water or any other liquid enters the cabinet, unplug the unit from power immediately and take
it to a qualified service person for inspection.
3. Location of Unit – Place the unit in a well-ventilated location. Take special care to provide plenty of ventilation on all sides of the unit especially when it is placed in an audio rack. If ventilation is blocked, the unit
may overheat and malfunction. Do not expose the unit to direct sun
light or heating units as the unit internal components temperature may
rise and shorten the life of the components. Avoid damp and dusty
places.
4. Care – From time to time you should wipe off the front and side panels
of the cabinet with a soft cloth. Do not use rough material, thinners,
alcohol or other chemical solvents or cloths since this may damage the
finish or remove the panel lettering.
IMPORTANT SAFEGUARDS
2
USER SECTION
Product Introduction ............................................................................................................5
Component Guide
CAA66 Controller ................................................................................................................6
KP6 Keypad........................................................................................................................7
KPL Keypad .......................................................................................................................8
KPSC Keypad......................................................................................................................9
SRC1 Remote Control........................................................................................................10
Operation
KP6 User Options Mode ....................................................................................................11
KPL User Options Mode.....................................................................................................12
INSTALLER SECTION
Getting Started
Unpacking ........................................................................................................................13
System Components .........................................................................................................13
Tools Needed....................................................................................................................13
System Installation Considerations......................................................................................13
Connection Tips ................................................................................................................13
Wiring Instructions
Keypad Wiring...................................................................................................................14
Speaker Wiring .................................................................................................................14
Component Guide
CAA66 Controller Front Panel Removal ...............................................................................15
CAA66 Controller Rear Panel .............................................................................................16
KP6 Keypad Update Port ...................................................................................................17
KP6 Keypad Rear Panel ....................................................................................................18
Keypad Installation
KP6 Keypad Installation .....................................................................................................18
Making Connections
Keypad Port Connections...................................................................................................19
Source Audio Input Connections.........................................................................................20
Source IR Connections ......................................................................................................20
RNET Source Audio Connections........................................................................................21
Common IR Input Connection .............................................................................................22
Speaker Connections ........................................................................................................23
TABLE OF CONTENTS
3
4
Zone Fixed/Variable Audio Output.......................................................................................24
12VDC Mute Trigger In/Trigger Out ....................................................................................25
Controller Link In/Out ........................................................................................................26
RS-232 Interface ...............................................................................................................27
Initial Hardware Install Test.................................................................................................28
Programming
Programming Center .........................................................................................................29
Controller Setup Mode
Controller ID ...............................................................................................................30
Number of Sources.....................................................................................................31
Factory Initialization.....................................................................................................32
Controller Setup Flow Chart ...........................................................................................33
Source Setup Mode
Source Setup..............................................................................................................34
Command Type Options
RNET Sources..........................................................................................................35
UEI Library...............................................................................................................36
Learned IR ...............................................................................................................37
Invalid Code .............................................................................................................38
Clear Code ..............................................................................................................39
Source Setup Flow Chart ...............................................................................................40
KPL Setup Flow Chart ....................................................................................................41
KPL Diagnostics Flow Chart ...........................................................................................41
REFERENCE SECTION
Source Names .................................................................................................................42-43
UEI Library Device Codes .................................................................................................44-46
Technical Specifications.........................................................................................................47
Warranty ..............................................................................................................................48
TABLE OF CONTENTS
5
Thank you for choosing the Russound®CAA66
controller/amplifier to enhance your home with
distributed audio.
The CAA66 caters to homeowners who want
more control over their multiroom systems with
such capabilities as infrared (IR) tools to manage
the system from anywhere in the house. More
source inputs, simplified programming and user
adjustable sound controls make listening to
music throughout the home easier than ever.
Key features include:
• Six sources delivered to any one of six zones
for sharing music throughout the home.
• Simplified programming and control via IR
library and intelligent IR learning capabilities for
quick setup.
• Scalable to 36 zones by connecting multiple
CAA66 units, to make whole house audio available to larger homes. Your system can grow as
your home grows.
The CAA66 kit ships with a remote control
(SRC1) and elegant keypads (KPL or KP6 models) for home audio one-touch control. From each
keypad, the user can adjust bass, treble, balance
and volume. The system supports multiple keypads per zone for convenient access and
includes an RS232 connection for integration
with home automation systems.
Russound's controller/amplifiers meet the needs
of homeowners who want to experience true
audio fidelity throughout the home. And with the
CAA66, customers have more home audio choices at a cost-effective price.
INTRODUCTION
6
The CAA66 front panel consists of a split molded
piece with a removable bottom half. This bottom piece
hides the Programming Center buttons. The power
switch has a push on/push off action with a blue LED
“power on” indicator to the left which illuminates when
the unit is on. The six zone LEDs light up amber when
the zones are active.
COMPONENT GUIDE
CAA66 FRONT PANEL
POWER ON/OFF LED - Indicates power on when illuminated
MAIN POWER SWITCH - Turns power on and off
ROOM LED INDICATORS - Indicate when a room is on (amber) or off (not lit)
REMOVABLE COVER - Covers the Programming Center buttons on the controller
1
4
2
3
1 2 3 4
The CAA66 front panel bottom half hides the
Programming Center.
The Programming Center is used to perform the controller setup and source setup procedures. These are
explained in detail in the Installers section of this manual. The Programming Center button LEDs light at different rates and in different colors during these proce-
dures to indicate programming steps. It also contains
an IR receiver window for remote control use during
programming.
Note: It is important to properly remove the panel to
prevent damage. See page 15 for complete instructions.
1
PROGRAMMING CENTER - used to perform the controller setup and
source setup procedures
1
7
COMPONENT GUIDE
KP6 KEYPAD
6
1
2
3
8
7
4
5
SOURCE NAME - Six clear windows with replaceable source name labels. Current source
selected is backlit amber.
VOLUME UP - Raises the volume for the room/adjusts User Menu options.
VOLUME DOWN - Lowers the volume for the room/adjusts User Menu options.
POWER - Turns zone ON or OFF when pressed once. When OFF, press and hold will turn OFF
all zones. Power button remains lit when OFF if any other zone in the system is ON.
IR CONFIRMATION/LOUDNESS LED - Blue LED blinks to confirm IR signal reception, and
remains lit when Loudness feature is enabled.
IR RECEIVER - Receives IR signals and passes them to the controller and source equipment.
Also used when the keypad is operated using the CA System remote controls.
SOURCE SELECT - Press and release scrolls through the available sources. Press and hold
brings up the USER MENU for Loudness, Bass, Treble, etc.
VOLUME LEVEL - Volume level indicator LEDs light up from left to right to indicate volume
level. Also used to indicate user option settings.
1
2
3
4
5
6
7
8
KP6 Keypad
AM/FM XM1
CABLE
SERVER1
Source
8
COMPONENT GUIDE
KPL KEYPAD
1
2
3
4
LCD PANEL - 5-character amber backlit display shows source name, volume and zone status.
VOLUME UP - Raises the volume for the room/adjust User Menu options.
VOLUME DOWN - Lowers the volume for the room/adjust User Menu options.
POWER - Turns zone ON or OFF when pressed once. When OFF, press and hold will turn OFF
all zones.. Power button remains lit when OFF if any other zone in the system is ON.
IR CONFIRMATION/LOUDNESS LED - Blue LED blinks to confirm IR signal reception, and
remains lighted when Loudness feature is enabled.
IR RECEIVER - Receives IR signals and passes them to the controller and source equipment.
Also used when the keypad is operated using the CA System remote controls.
SOURCE SELECT - Press and release scrolls through the available sources. Press and hold
brings up the USER MENU for Loudness, Bass, Treble, etc.
VOLUME LEVEL - 21-segment volume level bars increase from left to right to indicate volume
level/indicates user option settings.
SYSTEM INFO - SYS On indicates other active zones and SHARED indicates the selected
source is in use in another zone.
1
2
3
4
5
6
7
8
6
8
7
5
9
9
KPL Keypad
Source
9
COMPONENT GUIDE
KPSC KEYPAD
PRIMARY SOURCE CONTROLS - Functions on outer edge of buttons are default or normal
operation for each selected source. These include play, stop, forward, back, pause, etc.
FAVORITES - Set and recall two favorite settings of source and volume.
NUMERIC VALUE SHIFT - Press to shift buttons to numeric control or entry.
NUMERIC CONTROLS - Once numeric control is initiated, the primary control buttons now
represent the numeric value when pressed (0-9).
1
2
3
4
1
3
4
KPSC Keypad
1
2
2
KPSC Source Control Keypad
The KPSC keypad connects to a KP6 or KPL keypad to add source control and numeric capability. The amber backlit buttons provide primary
source controls when pressed, such as stop,
play, next, etc.
When the Numeric button is pressed, it becomes
backlit in red, and changes the buttons to numeric entry (0 - 9). A second press of the Numeric
button puts the keypad back into the primary
control mode. There is also a 3-second time out
on the Numeric button to back out of this mode.
The F1 and F2 favorite buttons are programmed
by a press and hold. They save current input and
volume level settings for recall, and can be overwritten with another press and hold.
10
COMPONENT GUIDE
SRC1 SYSTEM REMOTE CONTROL
POWER - Turn on or off selected zone.
NUMERIC INPUT - Number buttons for direct
input of frequency, channel, etc.
VOLUME UP/DOWN - Raise or lower the volume
in the zone.
MUTE - Mutes/unmutes zone audio output.
INFO - Display current channel and program information.
CURSOR KEYS - Move the cursor in the program
guide and menu screens.
OK - Choose the highlighted menu option.
Performs “Enter” function for devices.
EXIT - Exit out of the selected component’s menu
or guide.
TRANSPORT KEYS - Controls components (Play,
Pause, Stop, Forward, etc.).
PAGE UP/DOWN - For use with cable or satellite
boxes.
DISC - Directly select a disc using Numeric IR.
SOURCE KEYS - Select specific sources.
FAVORITES - Select and save favorite presets.
GUIDE - Display the program guide.
MENU - Access the menu of the selected
component.
CHANNEL UP/DOWN - Incrementally scrolls
through channels or tuned stations.
LAST - Recall the last channel or page back one
screen in the main menu.
INPUT - Switch sources on zone keypad.
1
4
7
2
5
8
3
6
9
11
10
14
12
13
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16
17
17
18
18
11
OPERATION
USER OPTIONS SETTINGS
KP6 Keypad User Options Mode Operation
Bass
Treble
Balance
Turn On
Volume
Press and
hold Source
button to
enter or exit
User Options
Menu
Press Source
button to
select option
Press Volume
Up or Down
buttons to
adjust setting
Source window blinks to indicate the
option that is ready for adjustment
Option
setting level
KP6 User Options Mode
The User Options Mode allows the user to adjust the
audio properties of a particular zone. The audio features that can be adjusted are: Bass, Treble, Balance,
Turn On Volume and Loudness. The top four Source
windows and the blue LED blink to indicate the option
is ready for adjustment.
To enter the User Options Mode, press and hold the
Source button when the zone is on. A press and hold
of the Source button (or a 9-second timeout) returns
the keypad to regular operation.
The top left (Source 1) button will temporarily blink to
indicate “Bass” is ready for adjustment. Subsequent
presses of the Source button toggle through Treble
(Source 2), Balance (Source 3), Turn On Volume
(Source 4) and Loudness (blue LED).
Once an option is selected, the Volume Up/Down buttons are used to adjust settings. The volume indicator
LEDs temporarily light to show the option setting.
Setting Loudness
In User Option Mode, the blue LED will blink rapidly
when Loudness is selected for adjustment. To turn
Loudness ON, press the Volume Up or Down button
once. The blue LED lights solid then blinks again. To
turn Loudness OFF, press Volume Up or Down once.
The blue LED goes dark for a moment, then blinks
again.
When the keypad is in operation, the blue LED lights
solid when Loudness is activated.
Blue LED will blink to
indicate Loudness is
ready for adjustment
AM/FM XM1
CABLE
SERVER1
Source
Source 2
Source 4
Source 1
Source 3
Source 5 Source 6
12
KPL User Options Mode
The User Options Mode allows the user to adjust the
audio properties of a particular zone. The audio features that can be adjusted are: Bass, Treble, Balance,
Turn On Volume and Loudness.
To enter the User Options mode, press and hold the
Source button when the zone is on. Press and hold the
Source button again (or a 9-second timeout) returns
the keypad to regular operation.
The first option name (Bass) appears on the display to
indicate it is ready for adjustment. Subsequent presses of the Source button toggle through Treble,
Loudness, Balance, and Turn On Volume.
Once an option is selected, the Volume Up/Down buttons are used to adjust settings. The volume indicator
bars indicate the option setting, along with setting
numbers displayed on the LCD.
Options and Settings
1. Bass: -10 < Bass:Flat > +10
2. Treb (Treble): -10 < Treble:Flat > +10
3. Loud (Loudness) (more bass, fuller sound): On or
Off (When Loudness is turned on, the blue LED lights
solid)
4. Bal (Balance): Left 10 < Center > Right 10
5. OnVol (Turn on Volume) (default room volume level):
0 to 100 (in steps of 2)
Press and
hold Source
button to
enter or exit
User Options
Mode
Press Source
button to
select option
Press Volume
Up or Down
buttons to
adjust setting
OPERATION
USER OPTIONS SETTINGS
KPL Keypad User Options Mode Operation
Blue LED will blink to
indicate Loudness is
ready for adjustment
Bass
Source
13
INSTALLER
GETTING STARTED
Unpacking the System Components
• Keep the original carton and packing materials
for future shipment or storage.
• Check for any visible signs of damage. If you
encounter any concealed damage, consult your
Russound dealer before proceeding to install the
unit.
• Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.
CAA66 System Components:
• 1 (one) CAA66 Controller/Amplifier
• 6 (six) KP6 or KPL Keypads
• 1 (one) SRC1 System Remote Control
• 6 (six) 845.1 Micro Emitters
Tools needed for installation:
• Drill with a 1/2” x 6” drill bit
• Keyhole saw
• Flat head screwdriver (medium size)
• Phillips Screwdriver (cordless recommended)
• 110 punchdown tool (included)
• Modular RJ-45 crimper and connectors
• Pair of diagonal cutters or wire strippers
• Stud finder
• Steel wire fish tape
• Cable staples
• Single-gang electrical work boxes
System Installation Considerations
There are several factors to consider before
installing the Russound CAA66 system:
• What are the intended listening zones?
• What system options and accessories might
be required for features such as local sources,
etc.?
• From where in each zone will the user prefer
to control the system? Where will the keypads
be located? Where will the speakers be located?
• Where will the source equipment be located?
The CAA66 must have proper ventilation above
and below for air circulation and heat dissipation.
A rack-mount location may require fans and vents.
Connection Tips
• It is recommended that the CAA66 and the
source equipment be plugged into a dedicated
20-amp circuit with an isolated ground. A power
line conditioner can reduce interference
problems caused by noise found in some electrical systems.
• Disconnect all live power cords before making
connections to the controller.
• Verify that all connections and polarity are
correct.
• Keep all power cords away from all signal
cables to prevent humming from induced noise.
• Choose reliable signal cables/patch cords.
• Label all wires with room location at both ends
of the wire.
14
INSTALLER
WIRING INSTRUCTIONS
RJ-45 Connections
The CAT-5 T568A wiring standard shown on
the right is used for the RJ-45 terminations.
Keypad Wiring
For the KP6 or KPL keypad, the following connections are used to terminate the CAT-5 wire to
the 110 punchdown on the keypad:
CA
T-5 WIRE COLOR TYPE
Brown. . . . . . . . . . . . . . . . . . . . . +12V
Brown/White. . . . . . . . . . . . . . . . +12V
Green . . . . . . . . . . . . . . . . . . . Ground
Green/White . . . . . . . . . . . . . Status In
Orange . . . . . . . . . . . . . . . . . . Ground
Orange/White . . . . . . . . . . . . . . IR Out
Blue. . . . . . . . . . . . . . . . . . . . . COM A
Blue/White. . . . . . . . . . . . . . . . COM B
• To determine the amount of CAT-5 wire
required for the system installation, first
decide how many keypads will be used, then
determine the distance between each intended keypad location to the planned CAA66
location. The maximum recommended wire
run length is 250 feet for each KP6 or KPL
keypad.
• Make sure that the entire wire path
between keypads and CAA66 is clear and
not obstructed by a floor ceiling joist, or
masonry wall which can’t be drilled through.
• Confirm ahead of time that you can drill an
outlet hole easily and in an unobtrusive spot
to connect wires with the CAA66.
• Label wires with keypad and room location.
This simplifies CAA66 hook-up once the keypads and speakers are installed.
Speaker Wiring
Standard 16-gauge 4-conductor stranded speaker wire can be run up to to 125 feet; 14-gauge
wire can be run up to 250 feet.
When running wire, pay particular attention to
the following areas:
• Avoid locations concealing pipes, heating
ducts and AC wiring in the general vicinity.
• Avoid running wires close to house electrical wiring for any distance. If you have to run
them parallel, make sure to space the wires
at least two feet from the AC line.
///
/
15
INSTALLER
COMPONENT GUIDE
Controller Front Panel Removal
Front Panel Removal
The CAA66 front panel removable bottom half hides
the Programming Center. It is important to follow the
proper removal process to remove the panel without
damage.
To remove the panel, you must be able to access the
slots located underneath the front of the controller.
this may require moving it until the front edge hangs
clear of the shelf.
Place a flat screwdriver blade in the bottom slot on
the left and right between the cover and the controller.
Twist the blade, then lift the bottom panel up and off.
Place a flat screwdriver blade in the bottom
slot on the left and
right between the
cover and the controller. Twist the blade
to loosen the cover
from its catches.
Grasp the panel on
each side and gently
lift the panel up and
off.
Panel
removed
from
controller
16
4
7
2
5
3
6
1
1
12
4
8
2
11
15
7
9
10
5
6 8
9
10
3
CONTROLLER LINK IN AND LINK OUT - Links multiple CAA66 controllers and peripherals.
RS-232 INTERFACE - The RS-232 Interface allows the zones to be controlled by PC or other
devices that have an RS-232 Interface, allows for firmware updates and programming.
CPU UPDATE SWITCH - For firmware updates.
KEYPAD PORTS - One KP6/KPL Keypad Port for each of the six CAA66 Zones.
MUTE 12VDC TRIGGER IN - Applying 12VDC to the Mute 12VDC Trigger In jack will mute audio
for assigned CAA66 Zones.
12VDC TRIGGER OUT - 12VDC 100mA Trigger Out turns on when any zone is on, and turns off
5 minutes after the last zone is turned off.
AC-240V/AC-110V Switch - Switches A/C input voltage between 240VAC and 110VAC.
FUSE HOLDER - Holds a replaceable fuse for A/C input connection:
110VAC operation - F3A H 250V; 240VAC operation, T1.25A H 250V.
AC 120/240 INPUT - Grounded 3-terminal plug detachable power cord connection.
ZONE OUTPUTS - Detachable color-coded modular 8 Ohm speaker connectors for each zone.
AUDIO OUTPUT - Audio line level output.
FIXED/VARIABLE SWITCH - Change line out between fixed and variable output.
COMMON IR OUTPUT - Output jack passes all IR signals from all keypads.
SOURCE IR OUTPUTS - Six source-specific IR Output jacks allow IR control of source equipment.
SOURCE INPUTS - Six pair of Audio Line Level input connections for CAA66 source components.
12
13
14
15
INSTALLER
COMPONENT GUIDE
Controller Back Panel
11
13
14
Loading...