Russound ACCLAIM 5 OUTBACK User Manual
Acclaim 5 Series OutBack
Outdoor Loudspeakers
Product Brief
The Acclaim 5 Series OutBack
loudspeakers are designed
to deliver rich, full sound in
extreme environments, such
as a backyard, patio, deck,
or other areas subjected to
temperature shifts and highmoisture exposure. Their high-efficiency design and multiple
mounting options allow these speakers to be easily installed
on a wall, eave, pole, corner or as a freestanding stereo pair.
With a lineup of four models, the Acclaim 5 Series OutBack
speakers are equipped with features to that ensure durability
in any outdoor conditions. Sealed enclosures, salt-tested
marine grade hardware, and aluminum grilles make the
Acclaim 5 Series OutBack speakers weather resistant. Drivers
with polypropylene cones, rubber surrounds and 1” Teteron
dome tweeters deliver full range audio through a wide range of
temperatures.
The line of Acclaim 5 Series OutBack speakers includes the
5B45 4”, the 5B55 5”, and 5B65 6” stereo pairs, and the
5B65S Single Point Stereo models. Each model is available in
both black and white finishes.
Features
Weather resistant construction and sealed enclosures for service in extreme conditions
High-efficiency design with greater power handling over previous Russound outdoor speakers
Mounts horizontally, vertically, in corners, on poles, or standing upright
Specifications
Since 1967, innovation, quality and reliability have been the core of the Russound product tradition. Today, Russound offers everything for enjoying multiroom audio-video in your
home. All audio-video distributed solutions are built to high standards and designed with the unique consideration of making products that are a pleasure to live with and enjoy.
©2009 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice.
Russound is not responsible for typographical errors or omissions.
5 Forbes Road, Newmarket, New Hampshire 03857 USA 603.659.5170 www.russound.com
4” Outdoor 2-way Loudspeaker
5B45
Woofer: 4” (100 mm) IMPP cone
Tweeter: 1” (25 mm) Teteron™
Mounting Options: Bookshelf foot, pole,
flat or corner surface
Dimensions: 9.5” x 6.25” x 6.25”
(24.13 x 15.87 x 15.87 cm)
Terminals: 12 gauge spring terminal
Grille: Aluminum
Bracket: Aluminum
Bookshelf foot: Yes
Recommended Power: 10 - 100 watts RMS
Sensitivity: 88 dB SPL (2.83V @ 1m)
Frequency Response: 80 Hz - 20 kHz ± 3 dB
Nominal Impedance: 8 ohm
Unit Weight: 3.9 lbs. (1.8 kg)
5.25” Outdoor 2-way Loudspeaker
5B55
Woofer: 5.25” (133 mm) IMPP cone
Tweeter: 1” (25 mm) Teteron
Mounting Options: Bookshelf foot, pole,
flat or corner surface
Dimensions: 11.25” x 7.5” x 7.5”
(28.57 x 19.05 x 19.05 cm)
Terminals: 12 gauge spring terminal
Grille: Aluminum
Bracket: Aluminum
Bookshelf foot: Yes
Recommended Power: 10 - 125 watts RMS
Sensitivity: 90 dB SPL (2.83V @ 1m)
Frequency Response: 72 Hz - 20 kHz ± 3 dB
Nominal Impedance: 8 ohm
Unit Weight: 5.4 lbs. (2.4 kg)
6.5” Outdoor Single Point Stereo Loudspeaker
5B65S
Woofer: 6.5” (165 mm) IMPP cone
Tweeter: (2) 1” (25 mm) Teteron
Mounting Options: Pole, flat or corner surface
Dimensions: 13” x 8.75” x 8.25”
(33.02 x 22.22 x 20.95 cm)
Terminals: 12 gauge spring terminal
Grille: Aluminum
Bracket: Aluminum
Bookshelf foot: No
Recommended Power: 10 - 150 watts RMS
Sensitivity: 91 dB SPL (2.83V @ 1m)
Frequency Response: 62 Hz - 20 kHz ± 3 dB
Nominal Impedance: 8 ohm/8 ohm
Unit Weight: 7.2 lbs. ( 3.3 kg)
6.5” Outdoor 2-way Loudspeaker
5B65
Woofer: 6.5” (165 mm) IMPP cone
Tweeter: 1” (25 mm) Teteron
Mounting Options: Bookshelf foot, pole,
flat or corner surface
Dimensions: 13” x 8.75” x 8.25”
(33.02 x 22.22 x 20.95 cm)
Terminals: 12 gauge spring terminal
Grille: Aluminum
Bracket: Aluminum
Bookshelf foot: Yes
Recommended Power: 10 - 150 watts RMS
Sensitivity: 91 dB SPL (2.83V @ 1m)
Frequency Response: 64 Hz - 20 kHz ± 3 dB
Nominal Impedance: 8 ohm
Unit Weight: 7.1 lbs. (3.2 kg)
Mounting options
For a greater number of mounting options over previous
Russound outdoor speakers, new all aluminum mounting
brackets allow for the traditional vertical or horizontal mounting
options, as well as providing for mounting in a corner or on a
pole. A machined channel in the brackets allows speakers to be
suspended by mounting screws for easy installation in hard to
access locations. Stereo pair models include a foot that installs
in place of the bracket, allowing the speaker to sit upright on a
bookshelf as a stereo pair for listening.
LR3165-0002 12/09
Loading...