Russound 860 PHANTOM User Manual
5 Forbes Rd. Newmarket, NH 03857, USA
Tel 603.659.5170 • Fax 603.659.5388
e-mail: tech@russound.com
LIMITED WARRANTY
The Russound®SaphIR 860 Phantom is fully guaranteed for Two (2) years from the date of purchase
against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is
necessary, it must be performed by Russound. The unit must be returned to Russound at the owner’s
expense and with prior written permission. Accidental damage and shipping damage are not considered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting
from abuse or servicing performed by an agency or person not specifically authorized in writing by
Russound. Damage to or destruction of components due to improper use voids the warranty. In these
cases the repair will be made at the owner’s expense. To return for repairs, the unit must be shipped to
Russound at the owner’s expense, along with a note explaining the nature of the service required.
Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit
from damage in transit.
Russound sells products only through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any russound product purchased from an unauthorized dealer or
other source, including retailers, mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an unauthorized source or other
manner not authorized by Russound shall void the warranty on the applicable product.
PRODUCT OVERVIEW
The SaphIR 860 Phantom receives IR signals from a handheld IR remote
control and relays these signals to the audio/video equipment for operation
from another room. It mounts to a flat surface with two-sided tape
(included).
FEATURES
• CFL friendly - allows installations in areas with compact fluorescent
lighting. Works in most lighting environments.
• Blue IR confirmation LED
• Wide band IR. Receives IR from many types of remotes
• Available in black or white
INSTALLATION
Place the SaphIR 860 Phantom on a shelf or other flat surface with the IR
receiver facing out. Use the included double-sided tape to secure it to the
surface.
28-0064 03/11/05
SaphIR
860 Phantom
Mini Infrared Receiver
CFL Friendly
Instruction Manual
BLOCK
WIRE CONNECTIONS
Direct Connection from 860 Phantom to Connecting Block
Connect the 860 Phantom to the 857 connecting block. Connect GND
(GROUND), IR (SIGNAL) and Voltage (+12VDC) to connector on the 857.
EMITTERS
CONNECTING
ONFIRM
IR C
LOCK
B
NFRARED
857 I
ONNECTING
C
DESIGNED IN USA MADE IN KOREA
I
N
857
EMITTER PORTS
123456
SIGNAL
STATUS
GND
+
12VDC
IR C
OMMON IN
IR R
ECEIVER
12VDC
+
P
OWER
12VDC
+
S
TATU S
GND (Black)
+12VDC (Black)
SIGNAL (White)
12 VDC
SUPPLY
POWER
846C OR 1201A
CONNECT
PACKAGE INCLUDES:
SaphIR 860 Phantom IR Receiver (1)
Terminal Strip (1)
Screws (2)
Two-way Mounting Tape (1)
SPECIFICATIONS
Receive Frequency: 36kHz to 58kHz
Transmit Frequency: 40kHz and 56kHz
Range: On Axis – 55ft to 80ft
30º Off Axis – 30ft to 55ft
Power: 12VDC 31mA max.
Dimensions: 0.43”W x 0.37”H x 2.15”D
Mounting Cord Length: 6.5 ft.
WIRE CONNECTIONS
Extended Leads from 860 Phantom to Terminal Strip to Connecting Block
The extended connection between the IR receiver and the connecting block
should be made with twisted-pair wiring (i.e., CAT-5e cable). It may be necessary to use shielded twisted-pair wiring if the wiring is exposed to interference from power wiring centers or from broadcast signals (FM, TV, etc.)
located nearby. The installer should determine the cable type needed to suit
the local conditions of the installation. A terminal strip is included for
extending the leads.
Russound offers both CAT-5e cable (AWCAT5) and shielded twisted-pair
cable (AW2260AB) which are suitable for IR installations. Contact Russound
for ordering information.
860 CAT-5e 857
SIGNAL BL SIGNAL
+12VDC GR/GRW +12VDC
GND BR/BRW GND
OR/ORW GND
BLW GND
860 Phantom
GND
(Black)
Blue/White
Open
Blue/White
Orange Pair
Blue
Open
Terminal
Strip
Green
Green/White
Brown
Brown/White
SIGNAL
(White)
+12VDC
(Black)
Drain Orange Pair
CAT-5e cable
and Blue/White to
Green/White
Brown
Brown/White
Orange
Orange/White
GND on 857
Green
IR R
IR C
+
12VDC
GND
STATUS
SIGNAL
S
TATUS
+
12VDC
P
OWER
+
12VDC
ECEIVER IN
OMMON IN
C
ONNECTING
857 I
NFRARED
B
LOCK
IR C
ONFIRM
DESIGNED IN USA MADE IN KOREA
EMITTERS
Blue
CONNECTING
BLOCK
123456
857
Loading...