Russound 5C64S, 5C82, 5C84, 5C62, 5C61S User Manual
...
Bass
T r eble
Bass
T r eble
Acclaim™ 5 Series
In-ceiling Loudspeaker
Installation Manual
INTRODUCTION
Introduction
Thank you for selecting the Russound Acclaim 5 Series In-ceiling Speakers.
Like all Russound speakers, they combine acoustic technology with durability
and will provide years of musical enjoyment. The single-point stereo models
feature a dual voice coil design allowing both right and left signals to function
in one speaker. This is ideal for smaller rooms or where there is not a dened
listening position. The 2-way models have pivoting tweeters to allow the sound
to be directed toward the listener.
The Acclaim 5 Series line provides solutions for background music and
dedicated music listening. The Acclaim 5 Series combines premium acoustic
materials with advanced drivers to deliver exceptional performance in every
application.
Some models oer Treble and Bass frequency adjustment buttons. This
adjustment allows you to tailor the sound of the speakers to better match the
listening environment. The buttons located on the front bae oer +3dB and
0 dB settings.
In addition to easy mounting features, Russound Acclaim 5 Series speakers
feature high quality drivers, sophisticated crossover networks, and advanced
designs to ensure optimum reproduction in your home, no matter what the
source material may be.
2 Russound Acclaim 5 Series In-ceiling Loudspeaker Installation Manual
PREPARATION / WIRING INFO
Speaker Wire
The amount of wire needed varies with speaker placement. Label speaker
wires with left, right, and room location.
What kind to use: We recommend using Russound AW series speaker cable
or any reputable brand of 16 to 12 gauge multi-stranded wiring for amplierto-speaker connections.
Selecting the proper gauge: Wire is measured in gauges: the bigger the
number, the smaller the wire. The gauge of wire needed is determined by the
distance between your amplier/receiver and the speakers. The longer the
run, the heavier the gauge needed. Use the following chart as a guide:
Length Minimum Gauge
0' to 100' 16
50' to 150' 14
100' to 200' 12
If the conductors are not sheathed in colored jackets, be consistent with
usage. The standard colors on the terminals are red Positive (+) and black
Negative (-). If the wire has transparent insulation, one conductor will be
copper-colored (+) and the other silver-colored (-). If the wire has an opaque
insulation, the conductors are dierentiated by a series of ribs or grooves, a
stripe, or dotted line on one conductor. Use and mark these as the Positive (+)
conductor.
Installation Tips
When installing the speakers, avoid:
T-bar "drop ceilings" with very thin berboard panels which can buzz and •
vibrate. If needed, reinforce the drop-in panel with wood or particle board.
Ceilings where there are pipes, heating ducts and especially AC wiring in •
the general vicinity.
Speaker Wire Paths
Avoid running speaker wires close to house electrical wiring for any •
distance. If you have to run them parallel, leave two feet between the
wiring. Speaker wires should cross AC lines at a 90° angle.
The entire path between speakers and amplier should be clear and •
unobstructed. Conrm placement for a wall port close to the intended
location of the amplier or receiver.
Label speaker wires at each end with Left and Right and the room location. •
Impedance Matching for Ampliers and Speakers
Not all ampliers or receivers can safely operate two sets of speakers at once.
If you intend to use more than one pair of speakers at a time it’s important
to consider both the impedance of the speakers and the capabilities of the
amplier or receiver you’re using. Changing the bass frequency adjustment
from +3 dB to 0 dB will change the impedance from 6 ohms to 8 ohms
respectively.
-
Typical usage of speaker wire conductors
+
-
+
3Russound Acclaim 5 Series In-ceiling Loudspeaker Installation Manual
PREPARATION / SPEAKER PLACEMENT
Speaker Placement in the Room
Determine the intended use and placement of the speakers in the room.
If they are going to be your primary listening source in a room, you need
to consider some other factors to insure proper imaging. The term "stereo
imaging" refers to a speaker system’s ability to project music so that it sounds
like the performers are in a three-dimensional space between the speakers.
Bass frequencies are emphasized when ceiling speakers are placed close to a
wall. Avoid placing one speaker in a corner and another on a long at surface.
The best acoustic performance will result if both speakers are placed in similar
positions and face a similar type of surface.
The ceiling speakers should be placed directly to the sides or rear of the
prime listening position with the tweeters aimed toward the listener. This
conguration is also suitable for a TV/movie and music mixed use.
Acclaim In-ceiling speakers may be used for rear surround sound channels by
placing them just behind the viewers. Refer to the Home Theater placement
diagram.
Refer to the details at right for sample In-ceiling placement options.
Good placement for serious listening:• Stereo pair in-ceiling speakers. 6' to 8'
(1.8m-2.4m) apart, on the long wall of a rectangular room, centered on the
listening area.
Best placement for serious listening: • Stereo pair in-ceiling. 6' to 8' (1.8m-2.4m)
apart, on the short wall of a rectangular room, centered on the listening
area.
Good placement for background listening:• Stereo pair behind, above or to
the sides of the main listening area. 6' to 8' (1.8m-2.4m) apart, centered on
the listening area.
Surround sound: • The multiple surround locations can all be made to work
as long as the tweeters are properly directed. The ceiling speakers should
have the tweeters aimed toward the listener.
Good Placement
Serious Listening
Best Placement
Serious Listening
Good Placement
Background Listening
4 Russound Acclaim 5 Series In-ceiling Loudspeaker Installation Manual
Home Theater
Surround Sound
PREPARATION FOR INSTALLATION
Pre-wire or Pre-construction
Locate all obstructions (AC wiring, plumbing, duct work, studs, and joists).
Route the speaker wire to the speaker location avoiding all obstacles.
Russound oers Speaker Rough-In Brackets that can be fastened to the
adjacent studs. Once the dry wall is installed, the opening is cut out. There are
holes in the bracket for speaker wire tie-o to keep the wire from being lost
during construction.
Make sure the speaker cutout (hole) doesn't extend further than ¼" (0.6 cm)
from the inside of the mounting bracket.
Run two pair conductors for single point speakers.
Rough-in Bracket
Stud / Joist
Speaker Cable
Bracket Installation
Screw
Retrot Installation
Locate existing pipes, duct work, and AC wiring before cutting any holes in
the ceiling.
Center the cardboard template between adjacent joists, avoiding all wiring, 1.
pipes, duct work, and lightly mark the outline with a pencil. Then use a
keyhole/drywall saw or motorized spiral-cut tool to make the opening.
Score the outline of the template with a utility knife to prevent chipping. 2.
If dealing with lath and plaster or thick paneling, drill 1" (2.5 cm) holes in
several places around the pencil outline. Use a ne-toothed keyhole saw
or hacksaw blade with slow strokes to saw through and remove the inner
surface.
Drill Pilot Hole
Mark template outline
Test for stud clearance
Score template outline
Cut out opening
Retrot Installation
5Russound Acclaim 5 Series In-ceiling Loudspeaker Installation Manual
Loading...