Russell Hobbs RHSB 025 Instructions & Warranty

INSTRUCTIONS/WARRANTY

MODEL: RHSB 025

MULIT PURPOSE STICK BLENDER

If blending ‘solid’ or ‘sticky’ ingredients, please use your blender for
no longer than 30 seconds at a time. After blending for 30 seconds, switch your
blender off for 10-15 minutes to avoid damaging the motor. If blending ‘liquid’
ingredients,please use your blender for no longer than a minute at a time. After
blending for a minute, switch your blender off for 10-15 minutes to avoid
damaging the motor. We suggest these usage times to help keep your product
working for years to come.”

15. Never attempt to open any part or dismantle the controls.
Responsibility for failure cannot be accepted if this instruction has
been ignored.

16. This product is intended for household use only. Industrial or
commercial use invalidates the warranty.

17. Use only original parts provided.

18. Switch OFF and remove the plug from the power outlet when:
assembling, disassembling, cleaning and storing.

19. Use only attachments or accessories sold by the manufacturer.

20. Do not attempt to repair or disassemble the appliance. There are
no user serviceable parts.

21. Never use for extended periods of time. The stick blender does its
work in seconds.

22. Do not use beaker or any other type of container if is cracked or
chipped.

23. When blending hot liquids, be careful they do not splatter by
ensuring the blending arm placed into the mixer before starting
use. Begin processing at a low speed.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

PARTS NAME AND LOCATION

A. ON/OFF Button
B. Motor body
C. Variable Speed control
D. Blending arm and blade
E. 600ml Beaker

NOTE: Before first use clean all components. Rinse blender arm under
cool water and rinse beaker in the same way. DO NOT IMMERSE OR
ALLOW WATER TO TOUCH THE STICK BLANDER MOTOR.

E

3

PREPARATION FOR USE

Should the need arise to change the fitted/moulded plug, follow these
instructions:

Mains (AC) Operation
This unit is designed to operate on 230V current only. Connecting
to other power sources may damage the unit.

Connect three-pin plug as follows:

The wires in this mains lead are coloured in accordance with the
following code: Green/Yellow = Earth Blue = Neutral Brown = Live

NOTE: This appliance is a class two product and as such does not have
an Earth wire. Please follow the above instructions leaving out the
connection for the Earth wire.

USING YOUR STICK BLENDER

The stick blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well for mixing drinks and smoothies.

1. Take the stick blender out of the box and take off any protective

wrappings.

REMEMBER NOT TO LEAVE PROTECTIVE PACKAGING LYING AROUND,
AS IT COULD BE DANGEROUS AROUND INFANTS.

2. Before first use, the blending arm should be cleaned with moist

cloth or rinsed under the tap. Make sure the unit is unplugged
before doing this.

3. Attached the blending arm onto the motor body in a clockwise

position by aligning drawings at the back of the motor body, until a
‘click’ sound is heard and the two parts are locked together.

4. Ensure the stick blender is unplugged and the speed control is set

to “0”.

5. Put the ingredients into the mixing bowl provided or a different

durable bowl, which is sufficiently tall and wide to avoid splashing.

6. Plug the unit into the mains power supply.

7. Dip the blending arm with blade as deep as possible into the

mixer.

4