Russell Hobbs RHS098 Instructions And Warranty

INSTRUCTIONS AND WARRANTY
MODEL NO. RHS098
RUSSELL HOBBS LCD STRAIGHTENER
2
Congratulations on purchasing our Russell Hobbs LCD Straightener. Each unit is
manufactured to ensure safety and reliability. Before using this appliance for the first time,
please read the instruction manual carefully and keep it for future reference.
FEATURES OF THE RUSSELL HOBBS LCD STRAIGHTENER:
Nano Silver and Tourmaline Technology helps eliminate bacteria
Ceramic heater and quick 30 second heat-up time to 180 ºC
Switch settings avoid accidental switch off during use (only after 2 seconds)
Extra-long floating heating plates with curved edges allows for perfect contact with
hair
Memory function to save the last temperature used
11 variable temperatures ranging from130 ºC - 230ºC
Automatic switch off in 72 minutes
Hinge lock
1.8metre and 360° swivel PVC cord
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Please read the instructions carefully before using any appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains
voltage in your home.
3. Incorrect operation and improper use can damage the appliance and cause
injury to the user.
4. The appliance is intended for household use only. Commercial use invalids
the warranty and the supplier cannot be held responsible for injury or damage
caused when using the appliance for any other purpose than that intended.
5. Avoid any contact with moving parts.
6. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
7. Children should be supervised to ensure that they do not play with the
appliance.
3
8. Check the power cord and plug regularly for any damage. If the cord or the
plug is damaged, it must be replaced by the manufacturer or a qualified
person in order to avoid an electrical hazard.
9. Do not use the appliance if it has been dropped or damaged in any way. In
case of damage, take the unit in for examination and/or repair by an
authorised service agent
10. To reduce the risk of electric shock, do not immerse or expose the motor
assembly, plug or the power cord to water or any other liquid.
11. Never immerse the unit in water or any other liquid for cleaning purposes.
12. Remove the plug from the socket by gripping the plug. Do not pull on the cord
to disconnect the appliance from the mains. Always unplug the unit when not
in use, before cleaning or when adding or removing parts.
13. The use of accessory attachments that are not recommended or supplied by
the manufacturer may result in injuries, fire or electric shock.
14. A short cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
15. Do not let the cord hang over the edge of a table or counter. Ensure that the
cord is not in a position where it can be pulled on inadvertently.
16. Do not allow the cord to touch hot surfaces and do not place on or near a hot
gas or electric burner or in a heated oven.
17. Do not use the appliance on a gas or electric cooking top or over or near an
open flame.
18. Use of an extension cord with this appliance is not recommended. However, if
it is necessary to use an extension lead, ensure that the lead is suited to the
power consumption of the appliance to avoid overheating of the extension
cord, appliance or plug point. Do not place the extension cord in a position
where it can be pulled on by children or animals or tripped over.
19. This appliance is not suitable for outdoor use. Do not use this appliance for
anything other than its intended use.
20. DO NOT carry the appliance by the power cord.
21. Do not leave this appliance unattended during use. Always unplug the unit
when not in use or before cleaning.
22. Always operate the appliance on a smooth, even, stable surface. Do not
place the unit on a hot surface.
23. Ensure that the switch is in the “Off” position after each use.
Loading...
+ 5 hidden pages