Russell Hobbs RHFP750 User Manual

2

WARRANTY

YEAR

Food Processor

RHFP750

INSTRUCTIONS & WARRANTY

RHFP750_IB&RB2_041111

Spectrum Brands Australia Pty Ltd

Locked Bag 3004 Braeside
Victoria 3195 Australia

Customer Service in Australia

TollFree: 1800 623 118
Email: [e-mail]
Website: www.spectrumbrands.com.au

Spectrum Brands New Zealand Ltd

PO Box 9817 Newmarket
Auckland 1149 New Zealand

Customer Service in New Zealand

TollFree: 0800 736 776
Email: [e-mail]
Website: www.spectrumbrands.co.nz

Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Ltd

W

0911

In this warranty:
Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the
Competition and Consumer Act 2010;

CGA means the New Zealand Consumer Guarantees Act 1993;
Goods means the product or equipment which was accompanied by this warranty and
purchased in Australia or New Zealand, as the case may be;
Manufacturer, We or us means:

1. for Goods purchased in Australia, Spectrum Brands Australia Pty Ltd ABN, 78 007 070 573;
or

2. for Goods purchased in New Zealand, Spectrum Brands New Zealand Ltd, as the case
may be, contact details as set out at the end of this warranty;

Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in
Australia or in New Zealand; and
You means you, the original end-user purchaser of the Goods.

1. Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law, or the CGA. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

2. The benefits provided by this Warranty are in addition to all other rights and remedies in
respect of the Goods which the consumer has under either the Australian Consumer Law
or the CGA. The original purchaser of the Goods is provided with the following Warranty
subject to the Warranty Conditions:

3. We warrant the Goods for all parts defective in workmanship or materials from the date
of purchase (Warranty Period), for the period of:­(a) Two (2) years for Russell Hobbs products (see product packaging for details)
(b) Two (2) years with five (5) year motor warranty for Russell Hobbs products (see product

packaging for details)
(c) Limited Lifetime, Ten (10) years for Russell Hobbs cookware.
(d) One (1) year for George Foreman, iRobot, Westinghouse, Black & Decker and Spectrum

Brands products.

If the Goods prove defective within the Warranty Period by reason of improper workmanship
or material, we may, at our own discretion, repair or replace the Goods without charge.

Warranty Against Defects

Warranty Conditions

4. The Goods must be used in accordance with the manufacturer’s instructions. This
Warranty does not apply should the defect in or failure of the Goods be attributable
to misuse, abuse, accident or non-observance of manufacturer’s instructions on the
part of the user. As far as the law permits, the manufacturer does not accept liability
for any direct or consequential loss, damage or other expense caused by or arising
out of any failure to use the Goods in accordance with the manufacturer’s instructions.

5. Exhaustible components (such as batteries, filters and brushes) of the Goods are
included under this Warranty only where there is a defect in workmanship or materials
used.

6. The warranty granted under clause 3 is limited to repair or replacement only.

7. Any parts of the Goods replaced during repairs or any product replaced remain the
property of the manufacturer. In the event of the Goods being replaced during the
Warranty Period, the warranty on the replacement Goods will expire on the same
date as for the Warranty Period on the original Goods which are replaced.

8. In order to claim under the warranty granted under clause 3 you must:
(a) Retain this warranty with your receipt/proof of purchase; and
(b) Return the Goods to us at the relevant address or to the Supplier by prepaid

freight within the Warranty Period accompanied with (i) the legible and unmodified
original proof of purchase, which clearly indicates the name and address of the
Supplier, the date and place of purchase, the product name or other product serial
number and (ii) this warranty.

9. This warranty is immediately void if:
(a) Any serial number or appliance plate is removed or defaced;
(b) The Goods have been serviced or otherwise repaired by a person not authorised

to do so by us or where non approved replaced parts are used.

10. The Goods are designed for domestic use only. A limited 90-day Warranty applies to
any industrial or commercial use of the Goods. The Goods must be connected to the
electrical voltage requirements as specified in the ratings label located on the Goods.

11. This warranty does not cover the cost of claiming under the warranty or transport
of the Goods to and from the Supplier or us.

12. This warranty is only valid and enforceable in Australia against Spectrum Brands
Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Ltd.

Contact us or the Supplier for further details.

Register your product online

If you live in Australia please visit: www.spectrumbrands.com.au/warranty
If you live in New Zealand Please visit: www.spectrumbrands.co.nz/warranty
Registration of your warranty is not compulsory, it gives us a record of your purchase
AND entitles you to receive these benefits: Product information; Hints and tips; Recipes
and news; Information on special price offers and promotions.

Any questions? Please contact Customer Service for advice.

Congratulations on the purchase of your new Russell Hobbs appliance. Each unit is manufactured

13 12 11

to ensure safety and reliability. Before using the Food Processor for the first time, please read this
instruction booklet carefully and keep it for future reference. Pass it on if you pass on the Food
Processor.

When using this appliance, basic safety precautions should always be followed.

1

2

14

NOTE: Product may vary
slightly from what is illustrated.

1. Food pusher

2. Wide-mouth feed chute

3. 10 cup processing

workbowl cover

4. Coarse slice/shred disc

5. Disc stem

6. 10 cup processing

workbowl
6A. Centre Post (White)

15

16

17

17A

7. Base

8. Storage lid

9. Dough blade

10. Large stainless steel

chopping blade (White)

11. Fine slice/shred disc

12. Cord wrap (under base)

13. Non-slip suction feet

3

4

5

6

6A

7

14. Controls

15. 3 cup workbowl cover

16. Small stainless steel

chopping blade (Black)

17. 3 cup processing

workbowl
17A. Centre Post (Black)

8

9

10

Important: Please read the below two points before using you Food Processor.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the
outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover.
There are no user-serviceable parts inside. Repair should be done only by qualified service
personnel.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping over
a longer cord. If more length is needed, use an extension cord rated no less than 10 amperes.
When using an extension cord, do not let it drape over the working area or dangle where
someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or
straining it at outlet and appliance connections. The maximum rating is based on the chopping
blade; other attachments may draw significantly less power.

BEFORE FIRST USE

CAUTION: Handle chopping blades and slice/grate disc carefully.

• Remove all packaging material and any stickers from the product. Wash all removable parts
as instructed in “care and cleaning” section of this manual.

• Select a level, dry countertop where the appliance is to be used, allowing air space on all
sides to provide proper ventilation for the motor (50mm gap min).

ASSEMBLY OF THE PROCESSOR BOWLS

HOW TO INSERT AND REMOVE THE CENTRE POST

• The centre post of the bowl is removable (2L processor bowl - White, 500mL mini processor
bowl - Black):

• Turn the bowl upside down.

• Grasp the outer tabs and turn the centre post clockwise until the locking tabs are free. Lift

the post out (A).

• To return to its original position, place centre post into opening in bottom of workbowl and
turn counter-clockwise until tabs snap into place.

NOTE: The 2L bowl and 500mL bowl centre posts are not interchangeable.

HOW TO LOCK THE WORKBOWL IN POSITION:

• Place the workbowl on the base with handle turned to the right of the locking mechanism
(B) over the unlock symbol

• Hold handle and rotate workbowl clockwise toward the lock symbol
into place (C). Be sure to lock the workbowl in place before attaching the blades and cover.

.

until it clicks firmly

HOW TO LOCK THE COVER

• Place cover over workbowl with the small latch to the right of the workbowl’s handle (D).

• Hold workbowl cover and rotate clockwise until cover locks into place.

Important: For your protection this appliance has an interlock system. The processor will not

A

A

B

A

B

C

operate unless the workbowl, cover and wide-mouth feed chute are properly locked in place.

• Place the wide-mouth feed chute on top of the cover with the small tab to the right of the
workbowl’s handle. Turn clockwise until it clicks into position in the handle.

• Insert the food pusher into the central tube of the wide mouth feed chute. Turn clockwise to
lock in place. The pusher is used to guide foods through the feed chute and can be
removed when adding liquid or additional foods while the processor is running.

• To remove, turn anticlockwise.

A

B

C

D

CONTROLS

• The controls are located on the front of the base ( E).

• Press PULSE, HIGH or LOW to select a function (see directions below).

OFF/PULSE

• Processor should be stored in OFF position and unplugged when not in use.

• Use PULSE for short processing tasks. This lets you control the size and uniformity of foods

being chopped.

• The OFF/PULSE button must be pressed and held for the appliance to operate in PULSE
mode. When released, the appliance will stop.

• The motor of the processor will run as long as the OFF/PULSE button is held down.

• Press the button and then release to allow the blades to stop running and the food to fall to

the bottom of the workbowl.

• Pulsing gives better control when chopping, mincing, mixing and blending foods. You can
control the size of the foods, from coarse to fine.

HIGH AND LOW

• When either speed is selected, the processor will run continuously until the OFF/PULSE
button is pressed.

E