Russell Hobbs RHSEB, RHDEB, RHQEB, RHKEB Instruction Manual

Instruct ion manual

RHSEB – Single fitted fleece electric blanket

RHDEB – Double fitted fleecy electric blanket

RHQEB – Queen fitted fleecy electric blanket

RHKEB - King fitted fleecy electric blanket

IMPORTANT INSTRUCTIONS

- RETAIN FOR FUTUR E USE

Instructions for the following Zip Electric Blankets

RHSEB – Single fitted fleece electric blanket- 220-240V -50Hz 60W
RHDEB – Double fitted fleecy electric blanket- 220-240V- 50Hz 60W
RHQEB – Queen fitted fleecy electric blanket - 220-240V - 50Hz 60W
RHKEB - King fitted fleecy electric blanket- 220-240V - 50Hz 60W

IMPORTANT SAFEGUARDS • PLEASE RETAIN FOR REFERENCE
Carefully read this manual in full before using this product

Use this electric blanket as an under-blanket only.
Ensure that you know how your electric blanket functions and how to operate it.

Maintain the electric blanket in accordance with the instructions to ensure that it
functions properly. Keep this manual with the electric blanket. If the electric
blanket is to be used by a third party, this instruction manual must be supplied
with it. The safety instructions do not by themselves eliminate any danger
completely and proper accident prevention measures must always be used.

No liability can be accepted for any damage caused by non-compliance with these
instructions or any other improper use or mishandling.

When using electrical goods always observe the safety
regulations to reduce the risk of failure, fire, personal injury
and electric shock. Always ensure you check the power
supply corresponds to the voltage on the rating label.

WARNING:

Do NOT use on or under a waterbed.

Do NOT use on an adjustable bed such as bunk or sofa bed.

Do NOT switch on if moist or wet.

Do NOT allow the heating wires to lie over the edge of your
mattress.

Do NOT insert safety pins, needles or other sharp items into the
blanket.

Do NOT use the electric blanket folded or rucked and avoid
creasing. Do NOT use a Double blanket on a single bed.

Do NOT tuck the blanket in.

Do NOT leave the electric blanket on indefinitely.

Do NOT use plastic, rubber backed, heavy or dense overlays as
they may lead to overheating.

Do NOT crease the blanket by placing items on top of it during
storage.

When storing the blanket, allow it to cool down before folding.

Young children should be supervised to ensure they do not play

with the appliance.

The appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a
responsible person to ensure they can use the appliance safely.

Check to ensure that the controller(s) and supply cord(s) cannot
become trapped in any bed or bedding. Keep the controller(s)
outside the bedding as much as possible.

Avoid extended use of your electric blanket at a high setting.
This may result in skin burns.

Inspect your blanket regularly for signs of wear or damage. If
there are signs of or if the blanket has been misused, return it to
the supplier prior to any further use.

This electric blanket is designed for domestic use only. It is not
intended for use in hospitals.

This electric blanket is not to be used by people who are
helpless, by infants, or by people who are insensitive to heat.

FITMENT

Place the electric blanket on your bed with the controller at
the pillow end ensuring it does NOT overhang the bed edge
and is not under the area intended for the pillow(s). Smooth
out the folds and wrinkles then unwind the tie tags and secure
the electric blanket to the bed as indicated. Pass the tape
under each comer of the mattress and through each loop then
under the next corner and through the loop then back to the
other side before securing firmly with a knot. A single control
blanket may be turned over so that the control is on the
preferred side of the bed however this may result in the
control facing towards the bed. Secure each corner and also
the middle as indicated.