Model Number: RHBV1001
UV Pro
Handheld UV Vacuum Cleaner
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
PLEASE RETAIN
FOR FUTURE REFERENCE
Contents
Page
Safety
instructions
…………………………….………..
2-5
Feature diagram
………………………………....…..
6
Unpacking your
vacuum cleaner
……………………………….……..
7
Assembling your vacuum cleaner
………………………………………
8
How to use your vacuum cleaner
………………………………………
9
How to empty the dust
container
and clean the filter
………………………………………
10
How to change the UV bulb
………………………………………
11
How to change
the fuse
………………………………………
12
Trouble
shooting
………………………………………
13
Connection to the mains supply
………………………………………
14
Notes
………………………………………
15-17
Guarantee & Customer Services
………………………………………
18
Spare Parts
………………………………………
19
2
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
Thank you for purchasing your UV Pro Handheld Stick Vacuum.
To get the best from your new cleaner, take a few moments to read these
instructions and keep them in a safe place for future reference.
Should you require any further assistance, our friendly Product Care team will
be happy to help.
Safety instructions
WARNING:
• It is hazardous for anyone other than a competent person
to carry out any service or repair operation that involves
the removal of a cover which gives protection against
exposure to electrical parts.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• This product is intended for household use only.
Do not use outdoors.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children should not play with the
appliance. Cleaning and user maintenance should not be
made by children unless they are older than 8 and
supervised. Keep the appliance and its cord out of reach of
children less than 8 years.
• Do not operate this appliance for anything other than its
intended use.
• Do not immerse in water or other liquids for cleaning.
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
3
Safety instructions
• Do not direct at people, animals, electrical outlets, or
equipment containing electrical components.
• Unplug from outlet when not in use. Do not leave the
cleaner unattended while plugged in.
• Do not use with damaged cord or plug.
• Do not use vacuum cleaner if it has been dropped,
damaged, left outdoors or dropped into water.
• Keep the vacuum cleaner away from water; do not allow it
to get wet. If unit is wet, do not plug unit into wall socket
or turn unit on.
• Do not handle the vacuum cleaner with wet hands.
• Do not pull or carry by cord, use cord as a handle, close
door on cord, pull cord around sharp corners or edges, or
expose cord to heated surfaces.
• Do not unplug by pulling on cord.
• To protect against electrical shock do not immerse cord,
plug, or appliance in water or other liquid.
• Unplug from the mains outlet when not in use, before
putting on and taking off parts, and before cleaning.
• The use of accessory attachments not recommended by
the appliance manufacturer may cause fire, electric shock
or injury. Only use the accessories supplied by the
manufacturer.
• Do not let the cord hang over the edge of the worktop, or
touch hot surfaces.
4
Safety instructions
• This cleaner is intended for internal household use only, do
not use outside or for anything other than its’ intended
purpose.
• Do not use this vacuum to pick up water or any other
liquids, combustible substances or hot/burning objects.
• Only use the unit when fully assembled.
• Never place your fingers or other objects into any part of
the cleaner. Be aware that loose clothing or hair may
become trapped in the cleaner if improperly used.
• Before use, ensure that all of the air vents of the cleaner
are clear and there is no restriction of air flow.
• Caution: Exhaust air discharged from the sides of the
cleaner may extinguish a gas fire, pilot light, or disturb
ashes in an open fire. Always avoid directing the cleaner
toward naked flames.
• Important: This cleaner has a thermal safety device which
automatically cuts off the power supply in case of over
heating. If the safety device has switched the cleaner off,
unplug from the mains and allow the cleaner to cool
down. Once the cleaner has cooled it can be plugged back
in to the mains and used as normal. This takes
approximately 15 minutes to reset.
5
1
Feature diagram
6
1. Handle
2. Power Switch
3. Dust Container
4. LED Light
5. UV Lamp
5
2
3
4
Unpacking your vacuum cleaner
7
Before using your vacuum cleaner
Remove all packaging and lay out the separate components.
Check the unit after unpacking for any visual damage such as:
• Misaligned or damaged parts
• Damage to the main body and separate components
• Damage to the plug or cable.
If you can see any damage do not use the vacuum cleaner
and contact customer services
1. Ensure the HEPA filter is correctly inserted in the Dust Tank.
Assembling your vacuum cleaner
8
2. Insert the Dust Tank into the Vacuum Cleaner Unit.
How to use your vacuum cleaner
9
1. Plug the power cord into a wall socket.
2. Push down the power switch on
the top of the machine to switch the
cleaner on and off.
The Russell Hobbs UV Pro is designed for use on soft furnishings such at
mattresses, sofas, rugs and upholstery. It’s purpose is to tackle the
allergens such as dust mites, bed bugs, bacteria and pollen - all things
that may worsen the symptoms of asthma, eczema and other
irritations.
The UV-C light attacks the DNA of bed bugs, dust mites and bacteria
such as E-Coli, which prevents them from reproducing and spreading,
effectively sterilising your mattresses and soft furnishings
3. Ensure the two large wheels on the underside of the product are in
contact with a flat surface, such as a mattress, then slowly move the
vacuum cleaner back and forth over the surface.
Important: The UV light will only activate if both large wheels are in
contact with the surface being vacuumed. This function is indicated
by the LED lights on the front of the unit.
How to empty the dust container
and clean the filter.
Pull out the HEPA filter and tap
the dust container over a bin to
empty.
Important: You may wish to
empty the dust container
outdoors as emptying may create
a dust cloud.
Ensure the unit is switched off.
Make sure to empty the dust
container before it gets full.
Grasp the dust container and
pull upwards.
10
Remove the sponge filter from the
HEPA filters To clean, remove excess
dust from the filter using a soft brush.
Wash in warm water and allow to dry
for 24 hours.
Once dry, replace the filters and the
dust container into the vacuum
cleaner unit.
How to change the UV bulb
To replace the UV bulb unscrew the bulb cover and pull the
cover away.
With both of your thumbs placed on each end of the bulb
rotate downwards to unlock it until you can see the pins.
Slightly pull out the terminals to remove the bulb. To install
the new bulb align the pins of the bulb to the holder at each
end and slot the bulb into place. Using your thumbs at each
end of the bulb rotate the bulb upwards this time to lock the
bulb into the holder. Install the bulb cover and screw.
11
How to change the fuse
1. Slot the end of a screwdriver into the
recess in the fuse holder of the plug.
2. Pull the fuse holder upwards until free
of the plug and slide the fuse out.
3. Replace the fuse and replace fuse
holder, pushing down until locked into
place.
Important: Only ever use 13 amp fuses.
Supplier Trade
Mark
Russell
Hobbs
Model Number
RHBV1001
Rated Voltage
220
– 240V
Rated Power
350W
12
Troubleshooting
13
Problem
Solutions
The vacuum cleaner is plugged
in but does not work
Check the power cord and
plug
are not damaged.
Check and replace the fuse in
the plug
The UV light
is not working
The UV light will only work
when both wheels at the front
of the product are in contact
with a flat surface.
The suction is decreasing and
the vacuum cleaner is not
picking up dirt
Check if
the dust container is
full, if so, empty it
Clean the filters
Vacuum cleaner is overheating
Check that the filters are not
blocked. If so, clean them
The air coming out of the
vacuum cleaner
smells
Clean the filters and dust
container
Ensure the filters have been
left to dry for 24 hours before
refitting back into the vacuum
cleaner
Connection to the mains supply
WARNING:
This appliance is designed to operate from a mains supply of AC220V 240V ~ 50/60HZ.
Check that the voltage marked on the product corresponds with your
supply voltage.
This product is fitted with a 13A plug complying with BS1363.
If this plug is unsuitable or needs to be replaced, please note the following:
Important: The wires in the mains lead are coloured in accordance with
the following code:
BLUE-NEUTRAL
BROWN-LIVE
14
Notes
15
Notes
16
Notes
17
18
GUARANTEE AND CUSTOMER SERVICES
At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Product Care Team, on 0345 209 7461
Monday – Friday: 8am-8pm & Saturday: 9am – 1pm,
who will be more than happy to assist you.
This product is guaranteed for 12 months from the date of the
original purchase. If any defect arises due to faulty materials or
workmanship, the faulty product must be returned to the place of
purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
• The product must be returned to the retailer with the original
proof of purchase.
• The product must be installed and used in accordance with the
instructions contained in this instruction guide and any other
instructions for use which are supplied.
• It must be used for domestic purposes only and for its intended
use.
• This warranty does not cover wear and tear, damage, misuse
or consumable parts.
This does not affect your statutory rights.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
19
SPARE PARTS
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
To check the availability of the following spare parts, simply contact
our friendly Customer Services team using the details provided at the
bottom of this page.
Sponge and HEPA Filters
Replacement Bulb
20
This symbol is known as the 'Crossed-out wheelie bin Symbol'.
When this symbol is marked on a product/batteries, it means that
the product/batteries should not be disposed of with your general
household waste. Only discard electrical/electronic/battery items
in separate collection schemes, which cater for the recovery and
recycling of materials contained within. Your co-operation is vital
to ensure the success of these schemes and for the protection of
the environment. For your nearest disposal facility, visit
www.recycle-more.co.uk or ask in store for details.
We reserve the right, due to possible changes to design, to alter
the instruction manual without prior notice.
For Customer Services & Spare
Parts please call
0345 209 7461
Opening times: Monday - Friday
8am – 8pm & Saturday 9am –1pm
Or visit us at
www.productcare.co.uk
Revision 1a
Model: RHBV1001
Made by G2S Ltd
under license.
G2S Limited, Wigan,
WN2 4AY
Loading...