Russell hobbs RHBL70COP User Manual
BROOKLYN BLENDER
RHBL70COP_IB_RB_FA_301118
Part No. T22-9001304
INSTRUCTIONS & WARRANTY
2 YEAR WARRANTY
RHBL70COP
IMPORTANT SAFEGUARDS
When using this appliance, basic safety precautions should always be followed, including the following:
Read all instructions before, and follow whilst using this appliance.
1. Read all instructions before, and follow whilst using this appliance.
2. To protect against electric shock DO NOT immerse cord, plug or motor unit in water or any other liquid.
3. Do not use outdoors or in damp or moist areas.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the product by a person responsible
for their safety.
5. This appliance is not a toy. Young children should be supervised to ensure they do NOT play with the appliance.
6. Always turn off and unplug from the power outlet when not in use and before assembling, disassembling or
cleaning.
7. To disconnect, set the controls to off. Turn off the wall power outlet, then grasp the plug and remove from the
wall power outlet. Never pull by the cord.
8. Do not operate any appliance with a damaged cord or plug or after the appliance has malfunctioned, or has
been dropped or damaged in any manner. Contact customer service for replacement, examination, repair or
adjustment.
9. There are no user serviceable parts. If the power cord is damaged, it must be replaced by the manufacturer or
similarly qualified person in order to avoid a hazard.
10. Do not use this appliance for other than its intended use. Using the appliance for other than its intended
purpose may result in personal injury.
11. The motor must always be switched off before connecting to the mains supply.
12. Cutting blades are very sharp. Handle the blender and blade assembly with extreme care and caution when
empting the jug and during cleaning.
13. The motor will only operate if the glass jug has been fully inserted into the motor unit.
14. Before switching on, make sure that the glass jug has been assembled correctly and has been seated into the
motor unit with the lid attached. Do not start the blender without the lid and measuring cap in place otherwise
liquids/ingredients will be ejected. Always place your hand on top of the blender jug lid to hold the jug steady
when the blender starts.
15. The blender is not to be operated with an empty glass jug.
16. Allow boiling liquids to cool before you pour them into the blender jug. Pouring boiling liquids into a cold glass
jug could cause the jug to crack.
17. Hot liquids/ingredients must be never placed in the blending jug;
• Hot liquids/ingredients can create pressure and/or may be ejected during blending which may result in a
possible scalding hazard.
• Hot liquids/ingredients may cause the glass blending jug to break.
18. Switch off and unplug the appliance before changing accessories or touching parts that move whilst in use.
19. Average operating time is approximately 1 minute. If further blending is required, allow a rest/cooling period of
1-2 minutes between operations.
20. Do not use on an inclined plane or unstable surface.
21. Keep the blender and the power cord away from the edges of tables or countertops and out of reach of children
and persons with disabilities.
22. Do not place the blender on or near any heat sources.
23. Do not use appliance for other than intended purpose.
24. Cleaning or user maintenance shall not be carried out by children without the supervision of a person
responsible for their safety.
25. Do not operate from a timer or other remote control system.
2
26. Do not use alkaline cleaning agents or harsh abrasives when cleaning this appliance.
2 7. For added safety, electrical appliances should be connected to a power outlet that is protected by a residual
current device (RCD), also often referred to as a ‘Safety Switch’. Your switchboard may already incorporate an
RCD. If unsure, call an electrician for verification and fitting if necessary.
28. Misuse of the appliance may cause injury.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLD AND SIMIL AR APPLICATIONS SUCH AS:
STAFF KITCHEN AREAS IN SHOPS, OFFICES AND OTHER WORKING ENVIRONMENTS;
FARM HOUSES;
BY CLIENTS IN HOTELS, MOTELS, AND OTHER RESIDENTIAL TYPE ENVIRONMENTS;
BED & BREAKFAST T YPE ENVIRONMENTS
3
Congratulations on the purchase of your new Russell Hobbs Brooklyn Blender. Each unit is
manufactured
read this
the appliance.
When using this appliance, basic safety precautions should always be followed.
to ensure safety and reliability. Before using the Blender for the first time, please
instruction booklet carefully and keep it for future reference. Pass it on if you pass on
1
2
3
4
9
5
6
7
8
FEATURES
1. Measuring cap
2. Lid opening
3. Lid
4. Pouring spout
5. Glass jug
6. Jug base / black outer ring
7. Motor unit
8. Speed selector dial
9. Handle
4
BEFORE FIRST USE
• All parts of the blender need to be thoroughly cleaned before being used for the rst time.
See "cleaning" section for disassembly instructions.
ASSEMBLY OF THE GLASS JUG
• Invert the glass jug onto a level surface.
CAUTION: Be careful when handling the blade assembly.
• Fit the seal ring on to the blade assembly.
• Insert the blade assembly (with the seal ring tted) into the black outer ring and turn it
anti-clockwise until tight.
NOTE: The black outer ring is fixed to the jug and cannot be removed.
• Reposition the jug with its opening upwards.
• Place the measuring cap into the lid. Place the lid onto the jug with the large round tab
covering the puring spout and the small round tab aligned with the handle.
5
INSERTING THE GLASS JUG
• Check that the speed selector dial is set to ‘0’ off.
• Place the jug assembly onto the motor unit, ensuring it is seated correctly.
OPERATING THE BLENDER
CAUTION: Do not place hot ingredients in the jug. Blending hot ingredients can create
pressure and/or may be ejected during blending which may result in a possible scalding
hazard. Hot ingredients may cause the glass blending jug to break.
CAUTION: Do not fill above the 1500ml line. If you do, the contents may force the lid off
when the motor starts.
• Place the ingredients you wish to blend into the glass jug.
• Fit the lid onto the jug, aligning the small round tab with the handle and large round tab with
the pouring spout. Press down rmly.
• Insert the measuring cap into the opening of the lid, and press down rmly.
NOTE: The lid and the measuring cap must be securely in place before starting the blender. Do
not start the blender without the lid and measuring cap in place otherwise ingredients will be
ejected.
• Place your hand on top of the blender jug lid to hold the jug steady. Switch the motor unit on
to the desired speed or pulse setting using the speed selector dial.
SPEED SELECTOR DIAL
‘1’ Position - For light usage with liquids
‘2’ Position - For more solid consistency (E.g. mixing liquids and solid foodstuffs)
‘P’ Position - For ice crushing & short pulses at high speed.
NOTE: You have to turn the ‘P’ pulse switch repeatedly
‘0’ Position - Off.
USEFUL TIPS
• When pureeing solid ingredients, place and blend small portions at a time, gradually adding
more ingredients.
• When processing solid ingredients, cut them into small pieces (2-3cm) rst.
• When blending liquids into solid ingredients, start off rst with a small amount of liquid,
gradually adding more liquid through the lid opening.
• Always place your hand on top of the blender jug lid to hold the jug steady when you are
operating the appliance.
• For stirring solid or very thick liquid ingredients it is recommended that you use the blender
set to ‘P’ pulse setting mode to prevent the blades from becoming stuck.
AFTER USE
• Turn the speed selector dial to the ‘0’ off position and wait until the blades stop moving.
• Switch the power off and remove the plug from the wall power outlet.
• Lift the glass jug up to remove it from the motor unit.
6
Loading...