Russell Hobbs RHB315, 20230-56 Instructions And Warranty

INSTRUCTIONS AND WARRANTY

RHB315

RUSSELL HOBBS

SATIN JUG BLENDER

Thank you for purchasing the Russell Hobbs Satin Jug Blender. Each unit has been
manufactured to ensure safety, reliability and ease of use. Before use, please read
these instructions carefully and keep them for further reference.

FEATURES OF THE RUSSELL HOBBS SATIN JUG BLENDER

 Powerful 1000W motor
 1.75L glass jug
 5 speeds with pulse function
 Pulse function for increased control when processing
 Stainless steel blades
 Detachable blade assembly for easy cleaning
 Safety lock mechanism
 Stainless steel switch with indicator light
 Ideal for crushing ice, smoothies, cocktails, sauces and much more
 Removable filter cap/ measuring cup for easy filling
 Dishwasher safe parts
 Non-sleep feet for added stability
 For domestic use only
 1 year warranty

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed
including the following:

1. Read all instructions and save the instructions provided with this appliance.

2. Do not put the motor unit in water or any other liquid; do not use it in a bathroom or

near any source of water.

3. Do not use outdoors.

4. The blender must be used only by a responsible adult.

5. Switch OFF and unplug the blender from the main power supply outlet before

dismantling or cleaning.

6. The blender is fitted with a safety switch to prevent the motor operating unless the jug

is in place. Do not use this to switch the blender on and off.

7. Turn the switch to standby “0” / “OFF” before fitting/ removing the jug to/ from the

motor/ base unit.

8. Turn the switch to standby “0” / “OFF” and wait until the blades come to a complete

stop before removing the lid from the jug, and before removing the jug from the motor/
base unit.

9. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

10. Children should be supervised to ensure that they do not play with the appliance.

11. Do not use the blender without first locking the lid in place.

12. Do not fill the jug with boiling liquids. Allow liquids to cool to a lukewarm temperature

before you put them in the jug. This type of temperature would be comfortable to the
touch.

13. Do not put your hand into the jug, even when it has been removed for

cleaning – the blades are very sha rp.

14. Do not come into contact with moving parts.

15. Do not put any other object (spoon, spatula, etc.) Into the jug while the blender

is plugged in.

16. Do not leave the blender unattended when plugged in.

17. Misuse of this appliance can result in injury.

18. Position the motor unit on a dry, firm, level surface, close to a power socket

and out of reach of children.

19. Route the mains lead so that it cannot be caught accidentally or tripped over.

20. Keep the blender and the mains lead away from hotplates, hobs and burners.

21. Store the blender away from direct sunlight and fluorescent light where

possible.

22. Do not let the jug overflow. If liquid gets under the motor unit, it may be

sucked into the motor, damaging it.

23. Do not fill the jug above the MAX. mark. If you do, the contents may force the

lid off when you start the motor.

24. The blender is equipped with a powerful motor and therefore processes very

quickly. Due to its efficiency there is no need to run the motor for more than 2
minutes at a time.

25. Do not run the motor for more than 2 minutes, either continuously, or using

the pulse setting, otherwise it may overheat. After 2 minutes use, switch it off
for at least 2 minutes allowing it to cool to room temperature and allowing it
recover.

26. Do not use the blender for any purpose other than those described in these

instructions.

27. Do not run the blender empty, as it may overheat.

28. Do not operate the blender after it malfunctions. If the mains lead or plug is

damaged, return the blender to the manufacturer in order to avoid any
hazard.

29. Children should be supervised to ensure that they do not play with the appliance.

30. Always turn the power off at the power outlet before you remove the plug.

Remove by grasping the plug. Do not pull on the electrical cord.

31. This appliance is designed for processing household quantities; it is not

suitable for commercial purposes. Use the appliance only for the purpose it
was designed for.

32. Do not use this appliance if it or parts of it show visible damage or if the

appliance has been dropped.

33. Do not attempt to make any modifications to this appliance.

34. To avoid any risk and to remain within warranty, repairs to this appliance

must be carried out by an authorised service agent only.

35. To reduce the risk of injury, never place the blade assembly on the base

without the jar properly attached.

36. If the supply cord is damaged, it must be replaced by the manufacturer, its

authorised service agent or similarly qualified persons in order to avoid any
hazard.

37. Switch off the appliance and disconnect from the power supply before

changing accessories or approaching parts that move when in use.

38. Use only accessories provided by the manufacturer for this appliance.

39. Do not run this appliance with an external timer or remote control system.

PARTS DIAGRAM

1. Measuring Cup

2. Jug Lid

3. Glass Jug

4. Blade Assembly Sealing Ring

5. Blade Assembly Unit

6. Blade Assembly Base

7. Motor Unit

8. Control Knob

9. Assembled Glass Jug

BEFORE FIRST USE

Before using your appliance for the first time take it out of the box and take off any protective
wrappings. REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING AROUND, AS IT

COULD BE DANGEROUS AROUND INFANTS. Wash the jug, lid and cap in warm soapy

water, rinse well and dry. NOTE: The blades are sharp, handle with care.

F

OPERATING INSTRUCTIONS

Assembly of the Glass Jug

1. Put the sealing ring (4) on the inner edge of the blade unit (5).

2. Put the blade unit (5) with sealing ring into the blade assembly base (6).

3. Mount the glass jug (3) onto the blade assembly base. Turn the blade assembly base
in a clockwise direction until it is correctly tightened in place. Be careful not to turn it
too much as it may strip the thread inside the jug base unit.

4. Mount the fully assembly glass jug onto the motor/ base unit.

5. After putting the ingredients in the jug, put the lid (2) onto the jug by pressing down.

6. Insert the measuring cup (1) into the opening of the lid, and turn it in a clockwise
direction until it is locked in place.

Inserting the Glass Jug

1. Position the motor unit on a dry, firm, level surface, close to a power socket and out of
reach of children.

2. Make sure that the blender is switched off (Switched to the ‘0’ setting).

3. Place the fully assembled glass jug (9) onto the motor (7).

Use

1. Place the ingredients that you wish to process into the glass jug.

2. Put the lid on the glass jug and close securely. Place the measuring cup into the hole in
the lid and turn clockwise to lock. It is not a good idea to run the blender without the
measuring cup in place, especially if only solid ingredients are used. They may be
ejected through the hole once they hit the blades.

3. Switch on the motor:
Speed setting Use
Low (1-3) for light usage with liquids
High (4-5) for more solid consistency – for mixing liquids and solid foodstuffs
P for ice crushing & short, powerful bursts
Caution: Don’t remove the lid from the jug while the blender is ON.