Russell hobbs MINI FOOD PROCESSOR, 14568 User Manual

instructions

2

3

Read the instructions and keep them safe. If you pass the processor on, pass on the
instructions too. Remove all packaging, but keep it till you know the processor works.

important safeguards

Follow basic safety precautions, including:

1 This processor must only be used by or under the direct supervision of a responsible

adult. Use and store the processor out of reach of children.

2 Don’t put the motor unit in water, don’t use it in a bathroom or near any

source of water, and don’t use it outdoors.

3 Don’t open the processor till the blades have stopped moving.

4 Don’t handle the blades. There’s plenty of plastic – handle that instead.

5 The blades are very sharp. Take care when you’re handling and cleaning

the blade unit – if you can’t see what you’re doing, don’t do it.

6 The motor will not operate unless the processor has been properly

assembled. This is a safety feature – do not try to overcome it.

7 Unplug before dismantling or cleaning.

8 Don’t leave the processor unattended while plugged in.
9 This processor is designed to process small quantities of food. Larger quantities may

be processed in batches, but it shouldn’t be used instead of a full size processor. Do
this and you’ll break it.

10 Don’t fill with anything hotter than you can comfortably handle (i.e. liquid

temperature below 40°C).

11 Don’t process raw meat of any description – meat must be fully cooked and fit to eat

before processing.
12 Don’t try to crush or chip ice, you’ll damage the blades.
13 Don’t process big bits – nothing bigger than about 12mm (half inch) cubes.
14 Don’t fill above max (700ml) – don’t fill more than half full with liquids.15 Don’t

run the motor for more than 1 minute at a time, then leave it for 3 minutes to cool

down before using it again.
15 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
16 Don’t fit any attachment or accessory other than those we supply.
17 Don’t use the processor for any purpose other than those described in these

instructions.
18 Keep the processor and the cable away from hotplates, hobs or burners.
19 Don’t use the processor if it’s damaged or malfunctions.
20 If the cable is damaged, return the processor, to avoid hazard.

household use only

before using for the first time

• Dismantle and clean the processor (page 4), to remove any manufacturing residues,

dust, etc.