Russell Hobbs Coffee Mill RHCM1 Instruction & Guarantee

Coffee Mill

Model RHCM1
Instructions & Guarantee

0805

CARE AND CLEANING

Ensure the coffee mill is off, and unplug it from the
power socket before cleaning (switch the socket off
first, if it is switchable). The powder cup and cap
may be washed in warm soapy water. Rinse and dry
thoroughly before re-use. They are not dishwasher­safe. Clean inside of the control ring with a soft
brush, such as a pastry brush. Clean the outer
surfaces of the coffee mill with a soft damp cloth.
Do not attempt to lubricate the coffee mill. Do not
immerse the coffee mill in water or any other liquid.
Do not use harsh or abrasive cleaners or solvents.

Guarantee

This product is guaranteed for a period of 2 years
from date of purchase, against defects in material
and workmanship. It is particularly important
that the purchaser carefully read the instructions
provided in order to get maximum use from this
product.
This guarantee is only valid if the appliance is used
solely for domestic purposes in accordance with
the instructions and provided it is not connected
to an unsuitable electricity supply or dismantled
or interfered with in any way or damaged through
dropping or misuse. Under this guarantee we
undertake to repair free of charge any parts found to
be defective.
Nothing in this guarantee or the instructions relating
to the product excludes, restricts or otherwise
affects your statutory right.
In line with our policy of continuous product
development we reserve the right to change the
product, packaging and documentation specifications
without notice.

This product conforms to Radio Frequency
Interference requirements

230-240V 50Hz AC Only

Read the instructions before using your Coffee Mill
and keep them in a safe place for future reference.
If you pass the Coffee Mill on, make sure to pass on
the instructions too. Remove all packaging before
using the product, but keep the packaging until
you’re satisfied the Coffee Mill is working.

important safeguards

When using electrical appliances, basic safety
precautions should always be followed including the
following:

1. Read all instructions.

2. In common with other portable
electrical appliances, do not
immerse this coffee mill, cord
or plug in water or any other liquids.
Do not use in a bathroom or outdoors.

3. Do not attempt to operate the coffee mill
without first fitting the lid.

4. Do not use the coffee mill when there is any
visable damage to the cord, plug or other
components.

5. This coffee mill is not a toy. It must not be used
by children, and it must be stored out of their
reach.

6. Move the timer switch to 0 (off) and unplug
the coffee mill from the power socket before
removing the lid from the coffee bean cup/
powder cup, before cleaning, and when not in use.

7. Do not leave the coffee mill unattended when
plugged in.

8. Position the coffee mill on a firm, level surface,
close to a power socket, and out of reach of
children.

9. Do not place the coffee mill on or near a hot­ plate, hot hob or burner, or in a heated oven.

10. Do not let the mains lead hang over the edge of
the working surface, where it might be caught
accidentally or tripped over, especially when
there are children about.

11. Do not fill the coffee bean cup above the rim
and do not operate the coffee mill empty,
otherwise you may damage the motor.

12. Do not operate the coffee mill for longer than
1 minute. It must be left for at least 1 minute
before re-use, otherwise it may overheat and
suffer damage.

13. Do not operate the coffee mill if the milling
wheels are damaged.

14. Do not use accessories or attachments other than
those provided by the manufacturer

.

15. Do not use the coffee mill for any purpose other
than those described in these instructions.

16. Do not let the main lead touch any hot surfaces.

17. Do not wrap the mains lead around the coffee mill.

18. Do not operate this appliance after it
malfunctions or if the mains lead or plug is
damaged. There are no user-serviceable
parts. The appliance must be returned for repair
or replacement in order to avoid hazard.

19. This appliance is not intended for use by young
children or infirmed persons without close
supervision.

20. Use extreme care when cleaning or inspecting
this appliance to avoid contact with sharp cutting
blades.

21. This appliance is for household use only.

USING YOUR COFFEE MILL

1. Position the coffee mill on a firm level work
surface, close to a power socket and out of the
reach of children.

2. Do not plug it in yet.

3. Fit the powder cup into the unit as illustrated.
Put the powder cap on.

4. Attach the bean cup as illustrated.

5. Put the required amount of coffee beans into the
hopper. The amount will vary with the type of
coffee and your own taste, but we suggest 1
heaped dessert spoon of coffee beans per cup
of coffee.

6. Replace the bean cap on the bean cup.

7. Move the control ring by turning it to the desired
degree of fineness.

8. Turn the cup selection to grind the desired
number of cups.

9. Plug the mains lead into the power socket and, if
necessary, switch the socket on.

10. Press and release the START button. The coffee
mill will start, the beans in the bean cup will
fall between the milling wheels, and the milled
coffee will be ejected into the powder cup.

11. If you need to stop the coffee mill before the
process has finished, press the on/off button (0).

12. When the coffee mill stops, unplug from the
power socket (switch off the socket first, if it is
switchable).

13. Remove the powder cap and spoon or tip the
milled coffee into the filter, basket etc. of your
coffee maker.

14. If you need to grind more coffee, wait at least 1
minute before re-using the coffee mill.

15. Clean out the coffee mill after each use,
otherwise any coffee left in the coffee mill may
become stale, and might taint the next lot of
coffee.

9

3

Fig.a

1

4

2

8

5

6

7

Your Coffee Grinder

1. Bean Cap 6. Body

2. Bean Cup 7. Start / Stop Button

3. Powder Cap 8. Seconds Selection

4. Powder Cup 9. Measuring spoon with

5. Control Ring cleaning spatula