Russell hobbs 24672 User Manual

r

24672

Register online for an EXTRA year guarantee

Visit uk.russellhobbs.com/product-registration You must register within 28 days of purchase

I www.russellhobbs.com

e

f

A

g

L

`

f

i

`

R

2

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been supervised/instructed and understand the hazards involved.

Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its

service agent, or someone similarly qualied, to avoid hazard.

b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

• Don’t use accessories or attachments other than those we supply.

• Don’t use the appliance for any purpose other than those described in these instructions.

• Don’t use the appliance if it’s damaged or malfunctions.

HOUSEHOLD USE ONLY

DIAGRAMS

1. Speed control

2. Flange

3. Whisks

4. Hooks

FITTING THE WHISKS/ HOOKS

1. Switch o (0) and unplug the mixer before tting or removing the whisks/hooks.

2. Turn each whisk or hook to align the pips on the shaft with the slots in the drive head, then
push it into the drive head till it clicks into place.

3. Each whisk/hook must be tted into a specic drive head.

4. Insert the one with the ange into the left-hand drive head (looking up from under the
mixer g. A).

5. Use both whisks or both hooks, don’t mix them.

REMOVING THE WHISKS/HOOKS

1. Switch o (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.

2. Hold both whisks/hooks, to prevent them jumping out, and press e. This will eject them
from the drive heads.

3