Russell Hobbs 20071 Instruction manual

r

instructions

EXTRA year guarantee

£10,000 prize draw

FREE rewards gallery

www.russellhobbs.co.uk/productregister/

See back for

Register online now!

details

H B

3
2
1

f

g

j

k

e

i

A

max

2

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children unless they are older
than 8 and supervised. Keep the appliance and its cord out of reach of
children aged less than 8 years.

Don’t fill above max, or the kettle may spit boiling water.
Use the kettle only with the stand supplied.
If the cable is damaged, return the kettle, to avoid any hazard.

h The surfaces of the appliance will get hot.

b Don’t put the kettle, stand, cable, or plug in liquid.

• Keep the kettle, stand and cable away from the edges of worktops.

• Unplug the stand when not in use.

• Don’t use the kettle without fitting the filter.

• Use the kettle only for heating water.

• Don’t use it if it’s damaged or malfunctions.

HOUSEHOLD USE ONLY

PARTS

1. Filter

2. Lid

3. Handle

4. Rapid boil zones marker

5. Switch

6. Stand

BEFORE FIRST USE

Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust,
etc.

FILLING

1. Remove the lid.

2. Fill with at least 1 cup of water, but not above max.

3. If you want only 1, 2, or 3 cups of water, fill to the 1, 2, or 3 marks inside the kettle.

4. Refit the lid.

USING YOUR KETTLE

1. Put the stand on a stable, level surface. Wind excess cable beneath the stand.

2. Plug the stand into the wall socket.

3. Put the kettle on the stand.

4. Move the switch to I. The kettle will start to heat.

3