Russell Hobbs 19005 Instruction manual

instructions

EXTRA year guarantee

£10,000 prize draw

FREE rewards gallery

Register online now!

www.productregister.co.uk/rhobbs

details

See back for

Underside

Food ProcessorBlender

Underside

Disc

Coarse

grater

Fine

grater

Slicer

Disc

Pusher

Lid

Tube

Tab

Blade unit

Cap

Lid

Blade Mixer Creamer

Support

Seal

Blade unit

Handle

Jug

Spindle

Bowl

Mill

Seal

Mill base

Turbo

0 off
1 low

2 high

Speed control

Motor unit

= dishwasher safe

Handle

Jug

B

A

2

Read the instructions, keep them safe, pass them on if you pass the
appliance on. Remove all packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.

To avoid injury, take care handling the blades, emptying

the jug, and cleaning.
Don’t add hot liquid (over 40°C), as it may be ejected due
to sudden steaming.
Misuse of the appliance may cause injury.
Don’t leave it unattended while plugged in.
Unplug before assembling, dismantling or cleaning.
If the cable is damaged, return the appliance, to avoid
hazard.

• Don’t put the motor unit in liquid.

• Don’t use the blender unless the lid and cap are fitted.

• Don’t put utensils into the jug while the appliance is plugged in.

• Switch off (0) before fitting the jug to the motor unit.

• Switch off (0), and wait till the blades stop before removing the
lid from the jug, or removing the jug from the motor unit.

• Don’t use accessories or attachments other than those we
supply.

• Don’t use the appliance for any purpose other than those
described in these instructions.

• Don’t operate the appliance if it’s damaged or malfunctions.

3

• You may use the processor and disc for cutting/grating for up to

2 minutes. Any other use should be restricted to 1½ minutes.
After this, let the motor rest for 2 minutes.

HOUSEHOLD USE ONLY

PR E PAR ATIO N

1. Sit the motor unit on a dry, firm, level surface.

2. Route the cable so it doesn’t overhang, and won’t trip or catch.

3. Lower the jug on to the motor unit, then turn the jug clockwise,
to lock it in place.

4. Remove the lid.

5. Put the ingredients into the jug – don’t fill past the max mark.

6. Put the lid on the jug.

7. Check that the speed control is set to 0.

8. Put the plug into the power socket (switch it on, if it’s
switchable).

SPEED CONTROL

1. Turn the speed control clockwise (1 = low, 2 = high).

2. Turn it back to 0 to turn the motor off.

3. Use low speed (1) for lighter applications, using mainly liquid
ingredients, and high speed (2) for heavier applications, using
mainly solid ingredients.

4. Turning it anti-clockwise to Y will give you a short burst at high
speed, for more precise control. In this direction, the control is
spring-loaded. When you let go, it’ll return to 0.

USING THE BLENDER

1. Lower the jug on to the motor unit, then turn the jug clockwise,
to lock it in place.

2. Remove the lid.

3. Put the ingredients into the jug – don’t fill past the max mark.

4. Place the lid onto the jug with the tab as shown in figure A.

5. Twist the lid clockwise to lock it (fig. B).

6. Align the pips on the cap with the slots in the hole, fit the cap in
the hole, and turn clockwise. Don’t run the blender without the
cap.

7. To add ingredients while the motor is running:
a) turn the cap clockwise to unlock it, and lift it off

4