Russell RWF075 User Manual
Publication No. RU-RWF-0313A
Flow-Temp
LOW VELOCITY
UNIT COOLER
Flow-Temp low air velocity unit coolers are ideally suited for meat cutting, holding and packing rooms
as well as produce storage and florist boxes.
Features:
• There are nine models available, ranging in capacity from 5,000 to 34,000 Btuh @ 10° TD
• Rust free heavy gauge embossed Aluminum housing is standard. Optionally available with alternate materials and
coatings.
• Seamless enhanced Copper tubes are staggered and mechanically expanded into corrugated Aluminum fi ns assuring
maximum heat transfer.
• Optional Copper fi ns and fi n coatings are available.
• Available voltages: 115/1/60, 208/230/1/60, 460/1/60, 100/1/50, 200-220/1/50 and 380/1/50.
• Fan motors and blades can be easily accessed by lowering the hinged drain pan.
• Standard motors are permanently lubricated with thermal overload protection.
• High effi ciency EC motors are standard, PSC or shaded pole motors are optionally available.
• All models are available in air, electric and hot gas defrosts designs.
• Air defrost units are suitable for use in coolers down to 35°F.
• Electric, Hot Gas Re-Evap and Hot Gas Reverse Cycle models are designed for use in rooms down to 28°F.
2
FLOW-TEMP
Nomenclature
R W F 050 A E 1 B 1 1 A 1 A
I II III IV V VI VII VIII IX X XI XII XIII
MODEL NUMBER NOMENCLATURE
I. Brand Name
R – Russell
II. Unit type
W – Walk In Unit Cooler
III. Series
F – Low Air Velocity
IV. Capacity or Degree of Capacity –
050, 075, 100, 130, 160, 190, 220, 270, 340
V. Voltage Code
A – 115/1/60
D – 208-230/1/60
F – 460/1/60
L – 100/1/50
M – 200-220/1/50
P – 380/1/50
X – Other
VI. Motor/Fan Type
E – (EC) Electronically Commutated
P – (PSC) Permanent Split Capacitor
S – (SP) Shaded Pole
X - Other
VII. Length in Fans
1, 2, 3, 4, 5, 6
VIII. Coil Density
B – 6 fpi
X – Other
IX. Coil Material and Coating Options
1 – Aluminum fins (Al)
2 –- Copper fins (Cu)
3 – Al + AST coating
4 – Al + Blygold
5 – Al + Bronze Glow
6 – Al + Heresite
8 –- Al + Russ-Proof
X – Other
NOTE: Coil coatings are not available for electric defrost models
X. Housing Material Coatings
1 – Aluminum, Embossed
2 – Galvanized
3 – White Painted
6 – Stainless Steel 304
X – Other
XI. Unit Design Confi guration
A – Air Defrost
E – Electric Defrost
G – Hot Gas Reverse Cycle Defrost with drain pan loop
H – Hot Gas Re-Evaporative Defrost with drain pan loop
K – Hot Gas Reverse Cycle Defrost with 115V heater
L – Hot Gas Reverse Cycle Defrost with 208/230V heater
X – Other
XII. Not Currently Used
1 – Standard
XIII. Revision Code – Single Alphanumeric Character
A – Current Revision
Loading...