Page 1
Publication No. RU-RNX-0712A
RN Series
INDOOR REMOTE
COMPRESSOR UNIT
3 THROUGH 40 HP
Unit shown with optional control
panel, oil control, liquid, &
suction line assemblies.
The RN series of indoor remote compressor units are designed to be compact yet serviceable, offering
a full selection of standard and optional features. Their narrow profile allows them to easily fit through
doorways and their small footprint maximizes use of premium floor space. An optional stacking rack
can further enhance floor space utilization for multiple unit installations.
Standard Features: Optional Features:
• Discus or Reed Semi-hermetic Compressor
(Contact factory for Hermetic Compressors)
• Suction and discharge service valves (as requires)
• Compressor springs and discharge vibrasorber
• Dual pressure control
• Liquid receiver with isolation valves
• Compressor head cooling fan (as required)
• Pressure relief valve or fusible plug
• Contactor box
• Compressor contactor and control circuit fusing
• UL and C-UL listed
• Large electrical control panel (as shown above)
• Crankcase heater
• Liquid line assembly (fi lter and vibration absorber)
• Suction line assembly (fi lter and vibration absorber)
• Suction Accumulator (mounted)
• Oil Separator (mounted)
• Air or Electric Defrost provisions (requires optional
control panel)
• Pumpdown toggle switch
• Two tier stacking rack
• Oil failure control (as required)
Page 2
2
INDOOR REMOTE COMPRESSOR UNIT
BTUH Capacity @ 105°F Condensing Temperature
NOM. REF. MODEL
H.P. TYPE NUMBER 40° 30° 25° 20° 10° 0° -10° -20° -30° -40°
3 404A RNS3M44 ----- ----- 30000 26800 21000 16400 ----- ----- ----- ----4 404A RNS4M44 ----- ----- 41500 36700 28400 21400 ----- ----- ----- ----5 404A RND5M44 77200 62600 56000 49800 39100 30200 23200 ----- ----- ----6 404A RND6M44 94000 76200 68300 61000 48300 37700 29200 ----- ----- -----
7.5 404A RND7M44 107600 87600 78800 70700 56600 44800 34900 ----- ----- -----
7.5 404A RND8M44 126100 102700 92400 82800 66100 52200 40700 ----- ----- ----10 404A RND10M44 148700 121600 109600 98700 79400 63000 49100 ----- ----- ----12 404A RND12M44 203800 166100 149450 134200 107400 85200 66900 ----- ----- ----15 404A RND15M44 204700 167200 150600 135400 108700 86300 67700 ----- ----- ----20 404A RND20M44 218200 179000 161000 144200 114100 88700 67100 ----- ----- ----25 404A RND25M44 272400 226300 204600 183800 146250 114900 91200 ----- ----- ----30 404A RND30M44 333550 273000 245800 220500 175400 137500 106150 ----- ----- ----35 404A RND35M44 422100 343600 309000 277300 221650 175200 136400 ----- ----- ----40 404A RND40M44 482800 398900 360900 325500 261950 208100 163350 ----- ----- -----
3 404A RNS3L44 ----- ----- ----- ----- ----- 25100 18900 13500 9100 5700
3 404A RND3L44 ----- ----- ----- ----- ----- 32800 25300 19000 13900 9600
4 404A RND4L44 ----- ----- ----- ----- ----- 39200 30400 23100 17000 11900
5 404A RND5L44 ----- ----- ----- ----- ----- 44300 34700 26600 19900 14100
6 404A RND6L44 ----- ----- ----- ----- ----- 53100 41600 32000 24000 17400
7.5 404A RND8L44 ----- ----- ----- ----- ----- 62700 49100 37900 28600 20600
9 404A RND9L44 ----- ----- ----- ----- ----- 76900 60200 46300 34700 25200
10 404A RND10L44 ----- ----- ----- ----- ----- 85200 67500 52400 39500 28700
12 404A RND12L44 ----- ----- ----- ----- ----- 88700 69500 54000 40800 28200
15 404A RND15L44 ----- ----- ----- ----- ----- 114900 91100 71800 55200 39800
22 404A RND22L44 ----- ----- ----- ----- ----- 138000 110200 86400 65400 46300
27 404A RND27L44 ----- ----- ----- ----- ----- 175800 139400 107400 80000 57180
30 404A RND30L44 ----- ----- ----- ----- ----- 198200 155900 120300 90300 64860
NOTES:
1. Increase (decrease) capacity 3% for each 5°F lower (higher) condensing temperature.
2. When ordering a R-507 model, change the model number suffi x from 44 to 57.
BTUH CAPACITY AT SUCTION TEMPERATURE (°F)
Page 3
INDOOR REMOTE COMPRESSOR UNIT
BTUH Capacity @ 105°F Condensing Temperature
RUSSELL COMP.
MODEL MODEL MIN. CIRC MIN. CIRC MIN. CIRC
NUMBER NUMBER RLA LRA AMPACITY* RLA LRA AMPACITY* RLA LRA AMPACITY*
RNS3M44 ERF-031E ----- ----- ----- 12.4 82 17 5.8 41 15
RNS4M44 NRB-040E ----- ----- ----- 21.8 141 29 11.3 62.5 15
RND5M44 2DD-050E ----- ----- ----- 22.3 120 29 10.5 60 15
RND6M44 2DL-075E ----- ----- ----- 31.6 169 42 13.8 85 19
RND7M44 2DA-075E ----- ----- ----- 32.0 169 42 14.1 85 19
RND8M44 3DA-075E ----- ----- ----- 41.0 215 53 20.0 106 27
RND10M44 3DB-100E ----- ----- ----- 43.6 215 56 20.0 106 27
RND12M44 3DF-120E ----- ----- ----- 48.2 275 63 23.6 138 31
RND15M44 3DS-150E ----- ----- ----- 59.6 275 76 29.0 138 38
RND20M44 4DA-200E ----- ----- ----- 66.0 308 84 33.0 154 43
RND25M44 4DH-250E ----- ----- ----- 82.2 428 105 41.1 214 52
RND30M44 4DJ-300E ----- ----- ----- 94.0 470 120 45.0 235 58
RND35M44 6DH-350E ----- ----- ----- 107.0 565 136 55.0 260 70
RND40M44 6DJ-400E ----- ----- ----- 142.0 594 180 70.0 315 90
RNS3L44 LAH-032E 16.7 105 24 12.8 112 18 6.2 56 15
RND3L44 2DF-030E ----- ----- ----- 16.8 102 23 8.1 52 15
RND4L44 2DL-040E ----- ----- ----- 26.3 161 35 10.2 60 15
RND5L44 2DA-060E ----- ----- ----- 28.8 161 38 10.2 60 15
RND6L44 3DA-060E ----- ----- ----- 26.5 150 36 12.0 77 17
RND8L44 3DB-075E ----- ----- ----- 31.5 161 42 16.1 83 22
RND9L44 3DF-090E ----- ----- ----- 39.0 215 51 16.9 106 23
RND10L44 3DS-100E ----- ----- ----- 42.0 215 55 18.6 106 25
RND12L44 4DA-101E ----- ----- ----- 45.6 220 59 22.8 110 30
RND15L44 4DL-150E ----- ----- ----- 52.6 278 68 26.3 139 35
RND22L44 4DT-220E ----- ----- ----- 66.0 374 85 33.0 187 43
RND27L44 6DL-270E ----- ----- ----- 80.8 450 103 41.6 218 51
RND30L44 6DT-300E ----- ----- ----- 95.6 470 122 42.8 235 55
* Minimum Circuit Ampacity shown is for the remote compressor and control circuit only, and does not include provisions for condenser fan,
evaporator fan, or electric defrost loads should they be required.
Consult the factory or the unit nameplate for more specifi c information.
AMPS @ 230/1/60
COMPRESSOR
AMPS @ 208-230/3/60
COMPRESSOR
AMPS @ 460/3/60
COMPRESSOR
3
Page 4
INDOOR REMOTE COMPRESSOR UNIT
BTUH Capacity @ 105°F Condensing Temperature
NOM. REF.
H.P. TYPE
3 404A RNS3M44 28 34 29 26* 18.5 8.25 19.5 5/8 1-1/8 5/8 5/8 1-1/8 390
4 404A RNS4M44 28 34 29 28* 18.5 8.25 19.5 5/8 1-1/8 5/8 5/8 1-1/8 470
5 404A RND5M44 71 42 29 31* 33.5 4.25 19.5 5/8 1-3/8 7/8 5/8 1-3/8 470
6 404A RND6M44 71 42 29 31* 33.5 4.25 19.5 5/8 1-3/8 7/8 7/8 1-3/8 530
7.5 404A RND7M44 81 48 29 31* 39.5 4.25 19.5 7/8 1-3/8 7/8 7/8 1-3/8 530
7.5 404A RND8M44 81 48 29 31* 39.5 4.25 19.5 7/8 1-3/8 1-1/8 7/8 1-3/8 580
10 404A RND10M44 124 48 29 34 36.5 5.75 19.5 1-1/8 1-3/8 1-1/8 1-1/8 1-3/8 760
12 404A RND12M44 124 48 29 34 36.5 5.75 19.5 1-1/8 1-3/8 1-1/8 1-1/8 1-3/8 770
15 404A RND15M44 124 48 29 34 36.5 5.75 19.5 1-1/8 1-5/8 1-1/8 1-1/8 1-5/8 780
20 404A RND20M44 124 48 32 35 36.5 5.75 22.5 1-1/8 1-5/8 1-3/8 1-1/8 1-5/8 820
25 404A RND25M44 156 60 32 38 44.5 5.75 22.5 1-1/8 2-1/8 1-3/8 1-1/8 2-1/8 1035
30 404A RND30M44 266 72 32 38 50.5 11.5 22.5 1-3/8 2-1/8 1-3/8 1-3/8 2-1/8 1090
35 404A RND35M44 266 72 32 36 50.5 11.5 22.5 1-3/8 2-1/8 1-3/8 1-3/8 2-1/8 1235
40 404A RND40M44 266 72 32 38 50.5 11.5 22.5 1-3/8 2-1/8 1-5/8 1-3/8 2-1/8 1285
3 404A RNS3L44 28 34 29 35 18.5 8.25 19.5 5/8 1-1/8 5/8 5/8 1-1/8 370
3 404A RND3L44 28 34 29 39 18.5 8.25 19.5 5/8 1-3/8 7/8 5/8 1-3/8 390
4 404A RND4L44 28 34 29 39 18.5 8.25 19.5 5/8 1-3/8 7/8 5/8 1-3/8 450
5 404A RND5L44 28 34 29 39 18.5 8.25 19.5 5/8 1-3/8 7/8 5/8 1-3/8 470
6 404A RND6L44 28 34 29 39 18.5 8.25 19.5 5/8 1-3/8 1-1/8 5/8 1-3/8 500
7.5 404A RND8L44 71 42 29 38 33.5 4.25 19.5 5/8 1-3/8 1-1/8 5/8 1-3/8 590
9 404A RND9L44 71 42 29 38 33.5 4.25 19.5 5/8 1-3/8 1-1/8 5/8 1-3/8 620
10 404A RND10L44 71 42 29 38 33.5 4.25 19.5 5/8 1-3/8 1-1/8 5/8 1-3/8 790
12 404A RND12L44 81 48 32 36 39.5 4.25 19.5 7/8 1-5/8 1-1/8 7/8 1-5/8 800
15 404A RND15L44 81 48 32 36 39.5 4.25 22.5 7/8 1-5/8 1-3/8 7/8 1-5/8 820
22 404A RND22L44 124 48 32 38 36.5 5.75 22.5 1-1/8 1-5/8 1-3/8 1-1/8 1-5/8 1010
27 404A RND27L44 219 60 32 44 44.5 5.5 22.5 1-1/8 2-1/8 1-3/8 1-1/8 2-1/8 1235
30 404A RND30L44 219 60 32 46 44.5 5.5 22.5 1-1/8 2-1/8 1-3/8 1-1/8 2-1/8 1285
*† Height is 32 inches with optional control panel.
Overall dimensions are subject to change when “RN” units are supplied with optional oil separator or suction accumulator.
Russell
Model
Number
Pumpdown Approx.
Cap.
@ 90% Mounting
(lbs) LWHABC
† Approx. Overall
Dimensions (Inches)
Rec’r Liquid Suction
Inlet & Suction Disch Line Line
Outlet Kit Kit
Ship
Wt.
(lbs)
Dimensional Data
FIG. 1
SIDE
FRONT
* All dimensions are in inches. All mounting holes are 3/8”.
201 Thomas French Drive, Scottsboro, AL 35769 PHONE (256) 259-7400 FAX (256) 259-7478 russell.htpgusa.com
Loading...