Specifications are subject to change without notice. Optional ceiling bracket available.
© 2007 Runco International. All rights reserved. Reflection, Enhanced GEN3, Vivix, Virtual Cinema, CSMS, CineWide, AutoScope, CinOptx, O-Path,
SLIC, Selectable Lamp Intensity Control, LiveLink, AxiShift, SuperOnyx and VirtualWide are trademarks of Runco International.
Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.
ISF is a trademark of Imaging Science Foundation.
CinemaScope is a trademark of Twentieth Century Fox Film Corporation.
Theater installation photo courtesy of Electronics Design Group, Inc., Piscataway, NJ
*ANSI Lumen specification:
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in
RUNCO literature to allow for direct comparison with other manufacturer’s projectors. These measurements can be taken at 9,000
to 13,000º Kelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.
**CSMS Home Theater Calibration ANSI Lumen Specification:
These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF
specifications including setting the color temperature to 6500º Kelvin, the standard for reproducing video.
**CSMS Home Theater Calibration foot-Lambert (fL) Specification:
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture
and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate
(without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema
theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130,
1.3 gain 72-inch wide screen. The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours
of usage.
2900 Faber Street, Union City CA 94587
Tel: 510-324-7777 • Fax: 510-324-9300
www.runco.com
Specifications CL-410 CL-420 CL-610/CL-610LT CL-810 CL-810 Ultra
Projector Type:
Digital Light Processing (DLP™), Single-Chip DMD™ Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
Native Resolution:
1024 x 576 1280 x 720 (16:9) 1280 x 720 (16:9) 1280 x 720 (16:9) 1280 x 720 (16:9)
Aspect Ratios:
4:3, Letterbox, 16:9, VirtualWide™, Cinema,
Virtual Cinema™
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
Video Standards:
NTSC, PAL, ATSC NTSC, PAL, ATSC NTSC, PAL, SECAM, ATSC NTSC, PAL, SECAM, ATSC NTSC, PAL, SECAM, ATSC
DTV Compatibility:
480p, 720p, 1080i 480p, 720p, 1080i 480p, 576p, 720p, 1080i 480p, 576p, 720p, 1080i 480p, 720p, 1080i
Picture Size
(16:9 screens)
Recommended Width: 72 – 96 in.
Maximum Width: 150 in.
Recommended Width: 72-96 in.
Maximum Width: 150 in.
Recommended Width: 72-96 in.
Maximum Width: 200 in.
Recommended Width: 72-96 in.
Maximum Width: 200 in.
Recommended Width: 72–96 in
Maximum Width: 200 in.
Throw Distance
(Factor x Screen Width)
(All CineWide Throws are
specified using a 2.35:1
screen)
Zoom 1.37 – 1.67 Zoom 1.40 – 1.70 CL-610 : Zoom 1.37 – 1.82
(with CineWide: 1.55 – 1.82)
CL-610LT : Zoom 1.87 – 2.47
(with CineWide: 1.87 – 2.47)
1.80 to 2.38
(with CineWide: 1.90 – 2.38)
Proteus Lens Options:
A: Fixed 0.67 (for rear-
screen
applications)
B: Zoom 1.22 – 1.44
C: Zoom 1.45 – 1.75
D: Zoom 1.82 – 2.38
(with CineWide
1.38 – 1.77)
E: Zoom 2.42 – 3.57
(with CineWide
1.82 – 2.67)
F: Zoom 3.65 – 5.68
(with CineWide
2.76 – 4.25)
(Proteus A, B or C options not
available with CineWide or
CineWide w/AutoScope)
Horizontal and Vertical
Offset Without CineWide
Option:
(Note: With CineWide
option offsets vary per
lens. Please contact Runco
Technical Support for more
information.)
Horizontal shift: ± 8%,
Vertical shift: Up to 40% above screen center, up to 60%
below screen center
Horizontal shift: ± 8%,
Vertical shift: Up to 46% above screen center, up to 63%
below screen center
Lens is fixed Lens is fixed horizontally
Vertical shift 50% up or down from screen center
Horizontal 13% of screen width left or right
Vertical (ceiling mount)
Up to 71% above screen center, up to 13% below screen
center (depending on lens)
Vertical (floor mount)
Up to 13% above screen center, up to 71% below screen
center (depending on lens )
Light Output:
CSMS™** Specifications:
Home Theater Calibration: 412 ANSI Lumens;
16 Foot-Lamberts (fL);
800 ANSI Lumens*
CSMS** Specifications:
Home Theater Calibration: 421 ANSI Lumens;
16.3 Foot-Lamberts (fL)
850 ANSI Lumens
CSMS** Specifications:
Home Theater Calibration: 395-526 ANSI Lumens;
12.3-19.3 Foot-Lamberts (fL)
1150 ANSI Lumens
CSMS Specifications:
Home Theater Calibration: 442-587 ANSI Lumens;
14.5-21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens
CSMS Specifications:
Home Theater Calibration: 442–587 ANSI Lumens;
14.5–21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens
Contrast Ratio:
CSMS** Contrast Ratio: 221:1; 2500:1 CSMS** Contrast Ratio: 228:1; 2600:1 CSMS** Contrast Ratio: 185:1-205:1; 1400:1-2200:1 CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1 CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1
Lamp:
250W NSH 250W 250W 250W 250W
Lamp Life:
2000 hours 2000 Hours 2000 Hours 2000 Hours 2000 Hours
Inputs:
(1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232
(1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
12V Output:
Max. 0.25 Amps, active when the
projector is on
Max. 0.25 Amps, active when the
projector is on
Max. 0.25 Amps, active when the
projector is on
Max. 0.25 Amps, active when the
projector is on
Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (CL-810 Ultra/CineWide with
AutoScope only) or when projector is on
Power Requirements:
100 – 240V AC, 50/60Hz, 370W
100-240V AC, 50/60 Hz, 370W 100-240V AC, 50/60 Hz, 310W 100-240V AC, 50/60 Hz, 310W 100-240V AC, 50/60 Hz, 310W
Operating
Environments:
41 to 95ºF (5 to 35ºC);
20-80% humidity (non-condensing)
41° - 95° F, (5° - 35° C),
0% - 90% Humidity (non-condensing)
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
Dimensions
(w/o feet):
Width: 14 in. (356.00 mm)
Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)
Width: 14 in. (356.00 mm)
Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)
Width: 16 1/2 in. (419.00 mm)
Depth: 16 3/8 in. (416.00 mm)
Height w/feet: 6 1/8 in. (156.00 mm)
Weight: 32 lbs. (14.6 kg) (includes lens)
Width: 19 5/8 in. (499.00 mm)
Depth: 17 5/8 in. (448.00 mm)
Height: 8 3/4 in. (222.00 mm)
Weight: 34 lbs. (15.42 kg) (includes lens)
Width: 19 5/8 in. (499.00 mm)
Depth: 22 in. (559.00 mm)
Height: 8 7/8 in. (226.00 mm)
Weight: 36 lbs. (16.32 kg) (includes lens)
Regulatory Approvals:
Complies with FCC Class B, CE, C-Tick Complies with FCC, CE, C-Tick Complies with FCC Class B, CE, C-Tick Complies with FCC Class B, CE, C-Tick Complies with FCC Class B, CE, C-Tick
Limited Warranty:
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
03/07
Engineered for ISF® calibration.